Professional Documents
Culture Documents
King Span Purlin Systems
King Span Purlin Systems
King Span Purlin Systems
CI/SfB
(28)
P128
Hh2
March 2010
Multibeam Evolved
Now in its fourth generation and with four decades of
development, our highly evolved purlin and rail system
is now
EVOLVED
M
A
E
LTIB
U
M
Products Overview
Roof Purlins
Eaves Beams
48
Cladding Rails
62
Multichannel
94
132
Index
138
Index
Multichannel
Cladding Rails
Ordering Methods
Roof Purlins
Eaves Beams
Company Overview
Foreword
Kingspan Structural Products are manufacturers of cold formed structural products, including Multibeam
purlin and rail systems, Multideck composite steel floor decking, Multichannel sections and a comprehensive
range of ancillary products on a fifty acre site in North Yorkshire.
In five decades of trading the company has become established as a market leader renowned for quality
products and innovative design.
Commitment
It is our commitment and professional approach
that has enabled the company to establish its
outstanding reputation for service, quality and to
maintain its lead in a highly competitive field.
Quality Assurance
Quality assurance is a fundamental feature of the
Kingspan operating policy, from initial material
testing for yield strength and thickness through to
delivery on site. All aspects of quality and service
are monitored ensuring compliance with the
requirements of BS5750 Quality Systems.
SCILGA Accreditation
The Multibeam Purlin and Rail systems have
achieved SCILGA accreditation.
A copy of the accreditation certificate can be
supplied if required.
Gold Standard
Kingspan Structural Products have been
awarded the Gold Standard under the Steel
Construction Sustainability Charter (SCSC).
Customer Service
Experience
From concept and design to manufacture and site installation,
Kingspan Structural Products has an unmatched degree of
experience with over four decades of experience and technical
expertise in all aspects of steel construction. With Multibeam now
in its fourth generation, Kingspan remain focused on servicing the
ever changing need of the construction industry.
Technical Excellence
At Kingspan Structural Products we are committed to advancing
technology within the construction industry. Working in conjunction
with the worlds leading experts, continually refining and testing
new and existing products, while enhancing our reputation for
technical excellence and the establishment of higher standards in
the industry.
Sustainability
The Multibeam system has been engineered to ensure maximum
performance whilst minimising the material content. Individual
sections are packed together using low carbon mild steel, blued
and waxed banding which is wholly recyclable. Identification of the
bundles is by paper labels which are biodegradable and can be
recycled. Softwood bearers, used to support the bundles in
transport are from managed woodland and are reusable.
Reuse
Steel does not lose its strength or stiffness over time so remains a
viable product for reuse. Assembly joints between components
can be easily dismantled at any time to facilitate reuse. Sections
can be recut to length and reholed to suit a revised use.
Recycling
Steel is one of the worlds most recycled materials
with over 40% of new steel made from recycled
steel. Kingspans suppliers encourage, promote
and assist in the return of steel for recycling.
Certification
Kingspan Structural Products has developed a fully integrated
management system which combines all the common elements of
ISO 9001 (Quality), ISO 14001 (Environment) and OHSAS
18001 (Occupational Health and Safety) into one system.
This simple coherent business management system enables the
organisation to successfully achieve its purpose and mission to
ensure that quality; safety and the environment are considered in
all aspects of the business process. Further information on these
certifications can be found on our website
www.kingspanstructural.co.uk.
Specialist Team
Kingspan offer a comprehensive advisory service to customers,
specifiers and contractors on all aspects of specification and use
of our product range.
Our specialist team of design engineers is available to answer
technical queries regarding the use of our products in any
application. Our internal sales staff and customer services
department provide a friendly and efficient service from initial
enquiry through to site delivery and after sales.
Area Sales Managers
Personal contact is important. Our specially trained regionally
based Sales Managers are on hand to discuss your project
personally and advise on the application and use of Kingspan
Structural Products.
Our Area Sales Managers are also trained to install and update our
time saving Toolkit design software. Toolkit is available to all
specifiers and users of our product range, as part of our
comprehensive service package.
Products Overview
Multibeam Purlin
and Rail System
Multichannel System
can be used for a myriad of
applications such as
horizontally laid cladding rails,
gable posts, door and window
trimmers and floor joists.
You c
ant
get i
with
t wro
Mult
ng
ibeam
The u
purli
nique
n
s;
sigma
is n
shape
on-ha
nded
makin
,
g it
t
h
e mo
versat
s
t
ile p
urlin
the m
on
arket
today
.
Multideck
composite floor slab decking system
can save up to 20% on concrete
costs, when compared with other
deck profiles.
Please see our separate technical
handbook (ref P292).
EVOLVED
M
A
E
LTIB
U
M
Overview
Spanning Systems
Anti-Sag Requirements
10
Purlin Restraints
12
Construction Details
16
24
Section Properties
32
Load Tables
33
M350
M300
M265
M235
M205
M175
M145
Flange
65mm
Flange
65mm
Flange
65mm
Flange
65mm
Flange
65mm
Flange
90mm
Flange
90mm
Roof Purlins
Roof Purlins
Applications
- All types of roof cladding
- Pitched, mansard, curved or flat roof applications
- Roof slopes from 0to 60
- Bay widths up to 15m
Material Specification
Hot dip galvanised steel to BS EN 10326:2004 and BS EN
10143:1993 specifications for continuously hot dip zinc/metal
coated structural steel strip.
The minimum grade of steel used is S450GD, with Z275 zinc
coating, giving an average coating thickness of 0.02mm to each
side. Other galvanised coatings may be available.
Please contact our Technical Department for advice.
Sustainability
The Multibeam system has been engineered to ensure maximum
performance whilst minimising the material content.
Individual sections are packed together using low carbon mild
steel, blued and waxed banding which is wholly recyclable.
Identification of the bundles is by paper labels which are
biodegradable and can be recycled.
Certification
Kingspan Structural Products has developed a fully integrated
management system which combines all the common elements of
ISO 9001 (Quality), ISO 14001 (Environment) and OHSAS
18001 (Occupational Health and Safety) into one system.
This simple coherent business management system enables the
organisation to successfully achieve its purpose and mission to
ensure that quality; safety and the environment are considered in
all aspects of the business process. Further information on these
certifications can be found on our website
www.kingspanstructural.co.uk.
Range
- Section heights from 145mm to 350mm
- Flange widths from 65mm to 90mm
- Gauges from 1.2mm to 2.7mm
For full product dimensions see page 24. Other sizes may be
available on specific request. Please contact our Technical
Department for advice.
Lengths
- All lengths are catered for; requirements in excess of 18m,
please contact our Sales Department.
EVOLVED
IBEAM
T
L
MU
Use d
ouble
sp
syste
m wh an
e
re
possi
ble
fewe
r com
ponen
quick
ts!
er to
erect!
Double Span
Double span lengths of Multibeam section span across three
frame supports and provide design economy and speed of
erection. This spanning system always results in the lowest
component count. To ensure equal load distribution across the
supporting steel work the joints are staggered, typically requiring
only one sleeve per run of purlins.
System Types
Double Span
Most popular system
Ideal for all bay centres
up to and including 9m
Lowest component count
Quicker erection and programme completion
Double Span - Heavy End Bay
Suitable alternative to double span system,
for bay centres between 6.5m and 9m
Appropriate for buildings of 10 bays or more
Efficient material usage
Moderate component count
Single Span Sleeved Joints
Option for all bay sizes particularly those with
bay centres greater than 9m
Where site restrictions (access, weight,
cranage etc.) dictates use of single span length
High component count
Normal double span load tables can be used
Single Span - Heavy End Bay
Suitable alternative to single span sleeved
system, for bay centres greater than 9m
Where site restrictions (access, weight,
cranage etc.) dictates use of single length
Highest component count
Appropriate for buildings of 10 bays or more
10
11
NB: Diagrams shown above are as plan view on the roof slope.
Heavier end sections indicated
Sleeve / Joint
Roof Purlins
Spanning Systems
Anti-Sag Requirements
Multibeam purlins on popular spans do not generally require anti-sag ties. In certain circumstances
such as wind reversal conditions, large bay sizes or cladding systems that do not provide lateral
restraint, then anti-sag ties may be required. Please refer to table 1:1 or the Kingspan Toolkit Software.
Mult
ibeam
purli
do no
ns
t req
uire
antisag
popul ties on
a
(up t r spans
o 6.1m
roof
and
slope
s 10
or le
ss).
Table 1:1 Anti-Sag requirements for differing bay centres at varying roof slopes
Roof
Slope
< 3
Multibeam
Purlin Section
Depth (mm)
Bay Centres
<3.0
>3 - 5.1m
>5.1 - 6.1m
>6.1 - 7.0m
All
>7.0 - 8.2m
>8.2 - 9.1m
>9.1 - 10.5m
>10.5 - 12m
1 Multilok
2 Multilok
N/A
N/A
1 Tubular
2 Tubular
3 Tubular
2 SW
3 SW
Angle Struts
Angle Struts
145
175
NO ANTI-SAG
TIES REQUIRED
205
3-10
235
1 Tubular
265
300
350
3 SW
145
N/A
NO ANTI-SAG
TIES REQUIRED
175
205
>10-15
N/A
N/A
235
1 Tubular
1 Tubular
N/A
N/A
1 Multilok
1 Multilok
2 Multilok
N/A
1 Tubular
1 Tubular
2 Tubular
3 Tubular
2 SW
3 SW
350
Angle Struts
Angle Struts
145
175
205
>15-18
235
265
300
350
> 18
N/A
3 SW
265
300
Angle Struts
N/A
NO
ANTI-SAG
TIES
REQUIRED
N/A
N/A
N/A
N/A
N/A
1 Multilok
1 Multilok
1 Multilok
1 Multilok
2 Multilok
N/A
1 Tubular
1 Tubular
1 Tubular
1 Tubular
2 Tubular
3 Tubular
2 SW
3 SW
Angle Struts
Angle Struts
Angle Struts
N/A
3 SW
N/A
N/A
All
N/A
N/A
Angle Struts
Consult Kingspan
For roof slopes of 30 and over consider using stiffened purlin cleats.
General Notes
The information in the table above can be affected by the types of
roof cladding used. Please see page 12 for more info.
Roof Slopes Over 18
For roof slopes outside those shown above consult our Technical
Department. Stiffened purlin cleats should always be used for Roof
Slopes over 30.
Long Roof Slopes
For roof slopes exceeding 20m long, diagonal wires may be
required to support the downslope component of the load.
Multilok Ties
Multilok ties are generally used on purlin sections up to
205mm deep.
Temporary Propping
When no anti-sag ties are used temporary spacers and propping
may be required during sheeting of the roof.
Mono Pitch
Diagonal wires generally required to support downslope load.
Contact Kingspan technical for further information.
10
Apex Ties
Apex Ties must be used in all cases where anti-sag ties are
required. On bays >6.1m when no anti-sag ties are used we
recommend that apex ties are used, to provide stability during
sheeting of the roof.
Anti-sag
Anti-sag requirements assume that there are two slopes with a
central ridge. On roof slopes of 6O or more, over 20m in length,
we recommend that wire ropes are considered within the slope
length to limit the load applied to the apex tie. See page 23 for
construction details.
Load Tables and Structural Properties
For best results please use the Toolkit Design Software.
Alternatively the ultimate loads to BS5950:Part5:1998 can be
found on page 33.
Spans
Multibeam sections can be used on spans up to 15m.
Please consult our Technical Department for more information.
Roof Purlins
Ties staggered
11
Purlin Restraint
Multibeam purlins can be used with all types of modern roof cladding systems including metal composite panels, standing seam, insulated
membrane panels, and traditional tiles. However, it should be noted that certain types of roof cladding do not give the necessary lateral
restraint to purlins and additional restraints may be required. Please consult Table 1:2 for guidance.
Table 1:2 Restraint requirements for various types of roof cladding
Load Table
Yes
Yes
Yes
See additional
information opposite
Yes
Twin Skin Clip Fixed Standing Seam (With through fix liner)
Yes
Yes
(if through fix deck used)
(see page 15)
Yes
Composite Membrane Panel (eg. Ward Topdek)
No
Tiles
Consult Kingspan
Consult Kingspan
Consult Kingspan
Consult Kingspan
12
Purlin Span
up to 6.1m
Purlin Span
>6.1m
8.1m
Purlin Span
>8.2m
9.1m
Purlin Span
>9.1m
11.1m
145
1 Tubular
Tie
1 Tubular
Tie
1 Tubular
Tie
1 Tubular
Tie
1 Tubular
Tie
1 SW
Angle Strut
1 SW
Angle Strut
N/A
N/A
N/A
2 Tubular
Ties
2 Tubular
Ties
2 Tubular
Ties
2 Tubular
Ties
2 SW
Angle Struts
2 SW
Angle Struts
N/A
N/A
3 Tubular
Ties
3 Tubular
Ties
2 SW
Angle Struts
2 SW
Angle Struts
2 SW
Angle Struts
N/A
175
205
235
265
300
350
3 SW
Angle Struts
3 SW
Angle Struts
3 SW
Angle Struts
3 SW
Angle Struts
Plan view
1 Restraint (Mid-span)
Clip Fix
Where the outer sheet is free to move and through fixed steel
liner minimum gauge 0.4 or 0.9mm aluminium liner using self drill,
self tapping screws at a maximum cross centres of 350mm,
then adequate restraint is provided to the Multibeam purlins to
enable the published load tables to be supported. Restraints as
table 1.1, page 10.
Clip fixed, where the outer sheet is free to move and no steel liner
then restraints must be provided as shown in table 1.3 to enable
the published load tables to be supported.
Secret fix insulated panels
Factory manufactured composite panel of steel and
insulation eg Kingspan KS1000LP/Ward DR1000.
Through fixed self drill, self tapping screws are placed
on the raised shoulder at the edges of the panels and
the fixing covered with a snap on cap. The two fixings
placed each side of the panel will provide adequate
restraint to the Multibeam purlins. Restraints as table
1.1, page 10.
13
Roof Purlins
Restraint Information
Plan view
4.10
6.90
7.022
7.022
Min 30
Roof Lights
Where the roof lights are laid in scatter pattern between
adequately fixed roofing then the restraints required are classed as
for the roofing system.
Where domed roof lights are used in strips across the purlins,
down slope framed on either side with full roof sheeting the
restraints are classified as for the roof system.
Laying roof lights in continuing strips along the purlins should be
avoided as this construction may not provide the required level
of restraint to the purlin. Please contact our Technical Department
for guidance.
14
Min 30
Roof Purlins
Purlin Span
up to 6.1m
Purlin Span
>6.1m
7.5m
Purlin Span
>7.5m
9.1m
Purlin Span
>9.1m
11.1m
145
Tie not
required
Tie not
required
Tie not
required
1 Tubular
Tie
1 Tubular
Tie
1 SWF
Angle Strut
1 SWF
Angle Strut
N/A
N/A
N/A
1 Tubular
Tie
1 Tubular
Tie
1 Tubular
Tie
1 Tubular
Tie
1 SWF
Angle Strut
1 SWF
Angle Strut
2 Tubular
Ties
2 Tubular
Ties
2 Tubular
Ties
2 Tubular
Ties
2 SWF
Angle Struts
2 SWF
Angle Struts
N/A
175
205
235
265
300
350
N/A
3 SWF
Angle Struts
3 SWF
Angle Struts
3 SWF
Angle Struts
3 SWF
Angle Struts
Tie Arrangements
Where the arrangements for cladding systems that do not provide
restraints, eg, standing seam.
Bay centres up to 8.2m
Minimum angle 30
Minimum angle 30
Eaves Beams restraints if
required, refer to page 51
15
Bolt-on Multicleat
16
Roof Purlins
Purlin Sleeve
Sleeve Hole Dimensions
1000
475
475
10 Purlin Gap
100
325
Sleeve
Stub
Multibeam
Purlin Stub
Multibeam
Gable Rail
17
CL
Cleader angle
Cleader
As on upper practical limit CL
should not exceed L/5.
Check deflections and
capacity where loads on CL
differ from those on L.
Sleeve
CL
Cleader angle
Cleader
As on upper practical limit CL
should not exceed L/5.
Check deflections and
capacity where loads on CL
differ from those on L.
18
Roof Purlins
475
Rafter Stay
RNA
475
Rafter Stay
RNB
19
Where Anti-sag
Ties not required
Where Anti-sag
Ties are required
20
Roof Purlins
Tubular Tie
Clamp
plate
21
130
Note: 18mm diameter holes
required in rafter flange
40
80
12mm
Rod Diagonal
80
80
Angle struts SW
Angle struts
SW
Rod
diagonal
Angle struts
SW
Rod
diagonal
Angle struts
SX
Angle struts
SW
Angle struts
SX
Angle struts
SX
30 min
30 min
Angle struts SX
Angle struts SY
22
Roof Purlins
Wire
Apex Restraint
Screwed rod apex ties are used in conjunction with both
Multilok and Tubular ties.
M12 Screwed
Rod
23
Weight
Kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
145
145
145
145
145
145
145
145
175
175
175
175
175
175
175
175
175
205
205
205
205
205
205
205
205
205
205
205
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
Dims (mm)
B
C
Gauge
(mm)
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
8
8
8
8
8
8
8
8
38
38
38
38
38
38
38
38
38
68
68
68
68
68
68
68
68
68
68
68
References
Weight
Kg/m
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
235
235
235
235
235
235
235
235
235
235
265
265
265
265
265
265
265
265
300
300
300
300
300
300
350
350
350
350
350
350
Dims (mm)
B
C
Gauge
(mm)
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
90
90
90
90
90
90
90
90
90
90
90
90
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
40
40
40
40
40
40
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
98
98
98
98
98
98
98
98
98
98
128
128
128
128
128
128
128
128
94
94
94
94
94
94
144
144
144
144
144
144
Reference Key
M
Multibeam
Section
M145
65 Flange
145
065
Section Flange
Depth
M175
65 Flange
M350
90 Flange
120
1.2mm gauge
M205
65 Flange
M235
65 Flange
M265
65 Flange
M300
90 Flange
20
30
Dim A
Dim C
Dim D
Lip size
nominal
15mm
32
Dim B
24
Gauges
Gauges
Gauges
Gauges
Gauges
Gauges
Gauges
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
-
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
2.5
-
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.4
1.5
1.6
1.8
2.0
2.2
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
Roof Purlins
Mult
icleat
s
provid
e
t
he
most
econo
m
ical
solut
ion f
o
r
stool
ed of
f
purli
ns.
Multicleats
All multicleat holes shown are 14mm diameter.
17
105
30
30
30
30
26
Single
MS145
MS175
MS205
MS235
MS265
17
105
30
30
30
30
26
Double
MD145
MD175
MD205
MD265
MD235
MD300
MD350
Multibeam Section
Depths (mm)
Double
Single
Double
Single
145
up to 175
up to 205
up to 235
up to 265
300
350
MD 145
MD 175
MD 205
MD 235
MD 265
MD 300
MD 350
MS145
MS 175
MS 205
MS 235
MS 265
MS 300
MS 350
MD 145BB
MD 175BB
MD 205BB
MD 235BB
MD 265BB
MD 300BB
MD 350BB
MS 145BB
MS 175BB
MS 205BB
MS 235BB
MS 265BB
MS 300BB
MS 350BB
151
181
211
241
271
306
356
Weld-On
Bolt-On
*All Cleats are supplied in unpainted steel as standard. Painted or galvanised finishes are available if required.
Please note, for galvanised finish there is an extended lead time, please contact our Sales Department for more information.
150
Bolt-on Black
Bolt-on Painted
Bolt-on Galvanised
17
Stiffened
Extended
105
Suffix
BB
BE
BG
S
X
Example
MD175BB
MD175BE
MD175BG
MD265BS
MD265X300
(ie; 300mm from
rafter face)
30
30
4 No. 14mm
diameter
fixing holes
26
100
35
35
25
Bolt-On
Single Cleat
Bolt-On
Double Cleat
145
175
205
235
265
300
350
6
6
8
8
8
8
8
Cleat
Dim H (mm)
50
60
70 (standard)
80
90
100
55
55
50
50
50
50
Base Plate
See table 1.9 for thickness
100
allow
leats
es
Multic
ion siz
g sect
n
i
r
e
y
f
f
di
n an
used o
to be
hile
ion, w
elevat
tant
a cons
g
n
i
n
i
a
e.
maint
ng lin
sheeti
Dim H
100
Optional plate
for bolt-on cleat
Cross
Centres*
17
105
30
30
26
35
26
14mm diameter
fixing holes
Roof Purlins
Multicleat Arrangement
Multicleats allow differing section sizes to be used on any
elevation, while maintaining a constant sheeting line.
Stiffener plate
Stiffener plate
3
Diagram A
shows a 265
deep section
fixed to a
MD265 cleat.
450
Max
Diagram B
shows a 205
deep section
fixed to a
MD265 cleat.
200
200
35
70
70
Extended
27
100
325
Purlin Sleeves
Symmetrical about
CL
50
Holes
Varies
with
Purlin
Depth
500
12
69/94
For application details see page 9. For construction details see page 17.
Table 1:11
Multibeam Sleeve Product References
Multibeam
Part Reference
Sleeve
Part Reference
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
Nominal Sleeve
Gauge (mm)
S145065A
1.6
S145065B
2.0
3.0
S145065C
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
1.6
S175065A
S175065B
2.0
S175065C
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
3.0
S205065A
1.6
S205065B
2.0
S205065C
3.0
Multibeam
Sleeve
28
145
065
Section
Depth
Flange
A/B/C
Sleeve Gauge
A=1.6mm
B=2.0mm
C=3.0mm
Multibeam
Part Reference
Sleeve
Part Reference
Nominal Sleeve
Gauge (mm)
S235065A
1.6
S235065B
2.0
S235065C
3.0
S265065A
1.6
S265065B
2.0
S265065C
3.0
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
S300090A
1.6
S300090B
2.0
S300090C
3.0
S350090A
1.6
S350090B
2.0
S350090C
3.0
OLVED
EAM EV
B
I
T
L
MU
a
Roof Purlins
a
a
30
Part Reference
TSA0000
where 0000 = Purlin Centres
M12 Thread
eg; TSA1000 (Purlin Centres = 1000mm)
Minimum length 150mm
For design details see page 11. For construction details see page 21.
35
30
20
TS140000
where 0000 = Purlin Centres
eg; TS141000 (Purlin Centres = 1000mm)
30
Minimum length 150mm
For design details see page 11. For construction details see page 21.
35
30
20
Clamp Plates
40x50x3mm plate
Used to fix and complete a run of tube struts, CA145 used with M145 purlins
Part Reference
30
CA145
CA
For construction details see page 21.
CA 145
CA
Multilok Ties
33
26
TM0000
16
where 0000 = Purlin Centres
3
eg; TM1600 (Purlin Centres = 1600mm)
For design details see page 11. For construction details see page 21.
Apex Ties
Varies
140
140
Part Reference
AT0000/XX
where 0000 = length between bends and XX
is roof slope eg; AT0250/15
eg. Ridge to purlin 250mm, Roof Slope 15
25
25
M12 Thread
SWF0000
where 0000 = overall length eg; SWF1500
(overall length = 1500mm)
Purlin section size must be specified
For construction details see page 20.
33
33
18
18
Varies
with
purlin/rail
55 depth
Purlin/rail
depth
-4mm
60
Varies
with
purlin/rail
depth 55
80
80
Purlin/rail
depth
-4mm
60
29
a
aa
aaa
Tiled Roof Struts/Angle Struts
Angle strut used to restrain the larger sections
on longer spans and as the primary restraint
member for the support of tiled roofs
33
60
30
Part Reference
SW0000
where 0000 = Purlin Centres
eg; SW1500 (Purlin Centres = 1500mm)
55 CL
25x14
18
Purlin/rail
depth
-4mm
Varies with
purlin/rail
depth
80
80
55
80
220
CL
80
Part Reference
18
SX0000
where 0000 = Purlin Centres
eg; SX1500 (Purlin Centres = 1500mm) 60
77
Purlin/rail
depth
-4mm
Varies with
purlin/rail
depth
80
33
55
18
SY0000
where 0000 = Purlin Centres
eg; SY1500 (Purlin Centres = 1500mm)
80
CL
25x14
60
33
80
30
80
220
90
60
SWBP1
Only applied to SY
strut when used at
base of roof
80
55 CL
14
60
33
80
RNA0000
where 0000 = Length between
Hole Centres
eg; RNA1000 (Hole Centres = 1000mm)
2.4
Maximum length 2m
25
38
RNB0000
where 0000 = Length between
Hole Centres
eg; RNB1000 (Hole Centres = 1000mm)
For construction details see page 19.
30
Mainframe Hole
18 dia.
Purlin Hole
14 dia.
38
25
Maximum length 2m
25
25
45
45
Purlin Hole
14 dia.
Mainframe Hole
18 dia.
Roof Purlins
a
a
aa
Diagonal Tie Wire
If using
single
cleats,
increase
Dim Y by
50mm
Dim X
purlin crs
DB
Single
DA
Double
DB
DA
Dim Y
state your dimension X and Y
For design details see page 15. For construction details see page 23.
20
Multibracket
30
30
28
Part Reference
18
43
65
38
130
18
18
20
40
18
For design details see pages 68-69. For construction details see page 74.
130
Note: Multibrackets are not suitable for connecting sections to a 90mm flange.
70
Cleader Angles
70
30
Part Reference
AC
AR
C135V270
Standard 4m lengths.
Supplied in standard
finish galvanised steel.
Plain lengths (i.e. no
holes).
45
70
70
45
Supplied in standard
finish galvanised steel.
AR
2.7
30
60
TRSP0000
where 0000 = Length between
Hole Centres
eg; TRSP1000
(Hole Centres = 1000mm)
C135V270
2.0
Max. length 4m
D Varies
Rod Diagonals
Part Reference
AC
2.7
Custom made
Max length 8m
Please specify hole
position along the
length.
Hole = 18mm diameter.
25
30
55
80
14
60
14
M12 Thread
30
30
31
Thickness
mm
Area
cm2
Weight
kg/m
Ixx
cm4
Gross Zxx
cm3
Iyy
cm4
Zyy
cm3
Rxx
cm
Ryy
cm
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
3.68
3.99
4.30
4.60
4.91
5.51
6.11
6.71
4.03
4.37
4.71
5.04
5.38
6.04
6.70
7.36
8.33
4.38
4.75
5.11
5.48
5.84
6.21
6.57
7.29
8.00
9.06
9.76
5.12
5.52
5.92
6.31
6.70
7.10
7.88
8.65
9.80
10.56
5.93
6.36
6.78
7.63
8.47
9.30
10.54
11.36
7.75
8.27
9.31
10.34
12.89
13.91
8.48
9.05
10.19
11.32
14.12
15.24
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
121.15
131.11
140.99
150.77
160.48
179.69
198.62
217.21
187.92
203.42
218.82
234.07
249.21
279.21
308.79
337.89
380.74
272.82
295.39
317.82
340.05
362.13
384.50
405.91
449.12
491.68
554.41
595.41
408.72
439.84
470.70
501.35
531.67
562.18
622.25
681.48
768.88
826.07
586.70
627.97
668.97
750.38
830.83
910.21
1027.46
1104.27
1017.30
1084.30
1217.51
1349.43
1673.13
1800.32
1470.17
1567.25
1760.37
1951.76
2422.01
2607.02
16.72
18.09
19.45
20.80
22.14
24.79
27.40
29.97
21.48
23.25
25.01
26.76
28.49
31.92
35.30
38.62
43.52
26.62
28.83
31.01
33.18
35.34
37.52
39.61
43.82
47.98
54.10
58.10
34.79
37.44
40.07
42.68
45.26
47.85
52.97
58.01
65.45
70.32
44.29
47.40
50.50
56.64
62.71
68.71
77.56
83.36
67.83
72.30
81.18
89.97
111.56
120.04
84.02
89.57
100.61
111.54
138.42
148.99
19.24
20.74
22.21
23.66
25.08
27.86
30.54
33.12
19.28
20.79
22.26
23.71
25.13
27.91
30.60
33.18
36.89
19.32
20.83
22.30
23.75
25.18
26.63
27.96
30.64
33.23
36.94
39.29
20.86
22.34
23.79
25.21
26.59
28.00
30.69
33.27
36.98
39.33
22.37
23.82
25.25
28.04
30.72
33.31
37.01
39.36
54.24
57.60
64.22
70.67
86.07
91.94
54.45
57.83
64.50
70.99
86.50
92.42
4.56
4.91
5.26
5.60
5.94
6.60
7.23
7.84
4.53
4.89
5.23
5.57
5.91
6.56
7.19
7.80
8.68
4.51
4.86
5.21
5.55
5.88
6.22
6.54
7.17
7.77
8.64
9.20
4.85
5.19
5.53
5.86
6.18
6.51
7.14
7.75
8.62
9.17
5.17
5.51
5.84
6.49
7.12
7.72
8.59
9.14
9.60
10.20
11.37
12.52
15.27
16.32
9.72
10.33
11.52
12.69
15.49
16.57
5.74
5.73
5.73
5.72
5.72
5.71
5.70
5.69
6.83
6.82
6.82
6.81
6.81
6.80
6.79
6.78
6.76
7.89
7.89
7.88
7.88
7.87
7.87
7.86
7.85
7.84
7.82
7.81
8.93
8.92
8.92
8.91
8.91
8.90
8.89
8.88
8.86
8.84
9.95
9.94
9.93
9.92
9.91
9.89
9.87
9.86
11.45
11.45
11.44
11.42
11.39
11.38
13.16
13.16
13.14
13.13
13.09
13.08
2.29
2.28
2.27
2.27
2.26
2.25
2.24
2.22
2.19
2.18
2.17
2.17
2.16
2.15
2.14
2.12
2.10
2.10
2.09
2.09
2.08
2.08
2.07
2.06
2.05
2.04
2.02
2.01
2.02
2.01
2.01
2.00
1.99
1.99
1.97
1.96
1.94
1.93
1.94
1.94
1.93
1.92
1.91
1.89
1.87
1.86
2.64
2.64
2.63
2.61
2.58
2.57
2.53
2.53
2.52
2.50
2.47
2.46
Mass
Kg/m
Area
cm2
lxx/lyy
cm2
lvv
cm2
Iuu
cm4
Zxx/Zyy
cm3
Zvv
cm2
Zuu
cm3
Rxx/Ryy
cm
Rvv
cm
Ruu
cm
AR (70x70)
AC (45x45)
3.02
1.33
3.84
1.70
18.83
3.44
7.53
1.38
30.13
5.90
3.56
1.02
2.94
0.84
6.04
1.80
2.21
1.42
1.40
0.88
2.80
1.81
32
Loading
Dead load
Imposed load
1.6
1.2
Wind load
1.4
1.2
1.2
Roof Purlins
use t
he to
olkit
design
softw
are fo
quick
r
and a
ccura
te
selec
tion
of
secti
ons f
or sp
ecific
condi
tions
.
Load Factor
1.4
1.0
Dead load acting with wind and imposed loads combined 1.2
Span
(m)
4.5
5.0
Section
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
Weight
kg/m
Ultimate
UDL
Gravity
kN
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
2.75
2.99
3.21
3.45
3.69
4.15
4.63
11.95
14.04
16.21
18.40
20.61
24.96
29.10
33.02
14.66
17.29
19.98
22.45
24.52
29.74
34.07
38.74
45.42
16.44
19.44
22.53
25.67
28.82
31.97
33.90
39.16
44.66
52.52
57.57
22.89
26.61
30.38
34.07
37.23
40.75
46.89
53.69
63.30
10.94
12.82
14.78
16.76
18.75
22.67
26.39
9.33
11.23
12.96
14.72
16.49
19.97
23.28
26.42
11.73
13.83
15.99
17.96
19.61
23.34
27.25
31.00
36.34
13.02
14.98
17.40
19.89
22.40
24.55
26.47
30.69
35.08
41.37
45.42
17.58
20.35
23.35
26.73
28.82
31.47
36.54
44.28
52.41
8.75
10.26
11.82
13.41
15.00
18.13
21.12
13.64
14.67
15.69
16.70
18.70
20.67
22.60
29.05
32.13
35.16
39.62
10.21
11.05
11.88
12.71
13.53
15.14
16.74
Span
(m)
5.5
Section
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
Weight
kg/m
Ultimate
UDL
Gravity
kN
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
29.93
13.48
15.85
18.28
20.50
22.36
27.07
30.96
35.16
41.17
15.19
17.90
20.69
23.51
26.35
29.19
30.92
35.65
40.60
47.67
52.21
21.17
24.53
27.93
31.25
34.09
37.26
42.78
48.89
57.54
63.13
10.08
11.79
13.58
15.38
17.19
20.76
24.15
27.36
12.47
14.62
16.84
18.86
20.55
23.94
10.79
12.68
14.63
16.40
17.89
21.66
24.76
28.13
32.94
12.15
14.32
16.55
18.81
21.08
23.02
24.74
28.52
32.48
38.13
41.76
16.94
19.62
22.34
25.00
27.27
29.65
34.20
41.25
48.54
53.26
8.06
9.44
10.86
12.30
13.75
16.60
19.32
21.89
9.97
11.70
13.47
15.09
16.44
18.31
19.73
21.00
23.53
26.02
28.48
32.09
46.72
50.18
8.44
9.13
9.82
10.50
11.18
12.52
13.83
15.13
14.17
15.24
16.30
17.36
33
Span
(m)
6.0
Section
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
Weight
kg/m
Ultimate
UDL
Gravity
kN
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
24.83
28.36
32.19
37.65
14.10
16.57
19.11
21.68
24.27
26.85
28.42
32.71
37.21
43.63
47.76
19.67
22.72
25.82
28.85
31.42
34.30
39.31
44.87
52.72
57.80
25.63
30.24
32.74
39.93
46.30
52.50
63.76
69.99
9.34
10.92
12.55
14.21
15.87
19.14
22.25
25.19
11.59
13.57
15.60
17.46
19.00
22.93
26.16
29.67
34.67
13.14
15.41
17.74
20.11
22.48
24.85
26.28
30.22
34.34
40.22
19.87
22.69
25.75
30.12
11.28
13.25
15.29
17.35
19.41
21.17
22.73
26.17
29.77
34.90
38.20
15.73
18.18
20.66
23.08
25.14
27.44
31.43
37.86
44.48
48.77
20.49
23.32
24.86
29.51
35.06
41.61
49.32
54.32
7.47
8.73
10.04
11.37
12.70
15.31
17.80
20.15
9.27
10.85
12.48
13.97
15.20
18.35
20.93
23.74
27.74
10.52
12.33
14.20
16.09
17.99
19.59
21.02
24.17
27.47
32.17
19.45
21.51
23.53
26.52
26.78
28.27
31.28
34.25
38.62
41.47
57.54
7.09
7.67
8.25
8.82
9.39
10.52
11.62
12.71
11.00
11.91
12.81
13.70
14.59
16.34
18.07
19.78
22.28
19.90
21.19
22.50
23.76
26.29
28.78
32.45
Span
(m)
6.5
Section
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
Weight
kg/m
Ultimate
UDL
Gravity
kN
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
44.00
18.35
21.15
24.00
26.77
29.13
31.77
36.36
41.46
48.65
53.30
23.92
28.17
30.45
37.04
42.88
48.56
58.89
64.59
10.82
12.65
14.53
16.25
17.67
21.30
24.28
27.52
32.14
12.30
14.40
16.56
18.74
20.94
23.13
24.44
28.07
31.88
37.30
40.79
17.18
19.78
22.40
24.89
27.14
29.58
33.81
38.52
45.16
49.45
22.41
26.34
28.44
34.53
39.92
45.16
54.70
59.96
27.41
31.68
41.69
35.20
14.67
16.92
19.20
21.42
23.30
25.42
29.07
34.97
41.04
44.97
19.12
22.29
23.74
28.00
33.11
39.15
46.22
50.80
8.66
10.12
11.63
13.00
14.13
17.04
19.43
22.02
25.71
9.84
11.52
13.25
14.99
16.75
18.23
19.55
22.46
25.50
29.84
32.63
13.74
15.82
17.93
19.98
21.71
23.67
27.04
32.50
38.10
41.72
17.91
20.85
22.65
26.59
31.32
36.72
43.12
47.27
20.99
24.38
31.45
34.85
39.88
45.00
48.35
9.37
10.14
10.91
11.67
12.43
13.92
15.40
16.85
18.99
15.85
16.96
18.06
19.17
20.24
22.40
24.52
27.65
29.69
26.51
28.04
31.03
33.98
38.34
41.20
51.24
55.07
-
34
Roof Purlins
Span
(m)
7.0
7.5
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M175065120
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.02
49.40
71.53
80.43
33.70
39.19
50.59
60.16
81.46
90.78
10.15
11.85
13.60
15.19
16.51
19.88
22.65
25.66
29.94
11.56
13.51
15.52
17.55
19.59
21.62
22.84
26.21
29.74
34.78
38.02
16.15
18.56
21.01
23.11
25.41
27.67
31.60
35.97
42.13
46.11
21.07
24.74
26.68
32.34
37.34
42.20
51.07
55.95
26.05
30.02
39.35
46.50
67.06
75.33
32.22
37.33
47.93
56.80
76.52
85.17
9.47
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
37.25
57.47
55.40
24.97
28.94
36.98
44.00
60.90
68.44
8.12
9.48
10.88
12.15
13.21
15.91
18.12
20.53
23.95
9.25
10.81
12.41
14.04
15.67
17.05
18.27
20.97
23.79
27.82
30.41
12.92
14.85
16.81
18.71
20.32
22.14
25.27
30.34
35.54
38.90
16.84
19.58
21.32
25.27
29.69
34.31
40.26
44.11
20.84
24.02
30.65
36.04
54.98
52.84
24.65
28.55
36.66
43.13
58.75
65.76
7.64
8.08
8.75
9.41
10.07
10.72
12.01
13.28
14.53
16.37
12.70
13.67
14.62
15.57
16.53
17.45
19.31
21.14
23.84
25.60
20.24
21.56
22.86
24.17
26.76
29.30
33.06
35.52
32.27
35.73
39.14
44.18
47.48
7.04
Span
(m)
8.0
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.29
3.58
3.84
4.13
4.41
4.67
4.96
11.06
12.69
14.18
15.41
18.56
21.14
23.94
27.95
10.90
12.72
14.60
16.49
18.40
20.30
21.43
24.58
27.87
32.58
35.60
15.23
17.48
19.77
21.57
23.87
25.93
29.65
33.73
39.48
43.20
19.87
23.31
25.11
30.40
35.07
39.60
47.88
52.44
24.79
28.50
37.24
43.91
63.11
70.83
30.82
35.59
45.50
53.76
72.13
80.20
10.31
12.02
13.78
15.56
17.34
19.13
20.19
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
8.91
10.22
11.41
12.39
14.91
16.98
19.22
22.42
8.72
10.18
11.68
13.20
14.72
16.00
17.14
19.66
22.30
26.06
28.47
12.18
13.99
15.82
17.60
19.10
20.79
23.71
28.46
33.31
36.44
15.88
18.45
20.07
24.06
27.88
32.20
37.75
41.34
19.83
22.80
29.01
34.03
51.74
50.44
23.57
27.22
34.80
40.83
56.61
63.15
8.25
9.61
11.02
12.45
13.88
15.08
16.15
7.62
8.20
8.77
9.34
10.46
11.57
12.66
14.26
10.22
11.06
11.91
12.74
13.56
14.40
15.20
16.82
18.42
20.77
22.30
16.48
17.63
18.78
19.92
21.06
23.31
25.53
28.80
30.94
25.06
28.11
31.12
34.09
38.49
41.36
62.67
67.43
8.98
9.73
10.46
11.20
11.92
12.66
13.36
35
Span
(m)
8.5
36
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
23.14
26.23
30.63
33.47
14.41
16.52
18.66
20.22
22.52
24.31
27.93
31.75
37.14
40.63
18.80
22.03
23.72
28.68
33.05
37.31
45.07
49.34
23.63
27.12
35.33
41.58
59.59
66.83
29.50
33.98
43.29
51.02
68.21
75.76
9.77
11.39
13.04
14.72
16.40
18.08
19.08
21.85
24.76
28.91
31.57
13.66
15.66
17.68
19.03
21.30
22.88
26.40
29.99
35.07
38.34
17.84
20.88
22.47
27.14
31.26
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
18.51
20.98
24.50
26.77
11.52
13.22
14.93
16.60
18.01
19.60
22.33
26.79
31.33
34.27
15.03
17.44
18.96
22.95
26.28
30.33
35.53
38.90
18.91
21.69
27.52
32.23
48.85
48.21
22.56
25.98
33.11
38.74
54.52
60.66
7.82
9.11
10.43
11.78
13.12
14.26
15.26
17.48
19.81
23.12
25.26
10.93
12.53
14.14
15.72
17.04
18.54
21.11
25.31
29.58
32.35
14.26
16.53
17.96
21.89
24.85
14.79
16.19
18.25
19.60
13.46
14.48
15.50
16.51
17.50
18.51
20.49
22.44
25.31
27.20
20.67
22.02
24.70
27.35
29.97
33.83
36.35
55.08
59.27
7.96
8.61
9.27
9.92
10.56
11.21
11.84
13.10
14.34
16.17
17.36
11.92
12.83
13.73
14.62
15.50
16.39
18.15
19.87
22.42
24.09
17.11
18.31
19.51
21.88
24.23
Span
(m)
9.0
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
35.26
42.57
46.59
22.56
25.85
33.60
39.48
56.43
63.25
28.26
32.48
41.25
48.52
64.67
71.78
9.29
10.82
12.38
13.97
15.56
17.15
18.08
20.70
23.45
27.37
29.88
12.99
14.88
16.79
17.98
20.21
21.61
25.02
28.42
33.21
36.30
16.97
19.85
21.34
25.76
29.64
33.42
40.33
44.12
21.58
24.69
32.02
37.57
53.59
60.03
27.10
31.10
39.39
46.25
61.48
68.20
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
28.66
33.56
36.73
18.05
20.68
26.17
30.60
46.27
46.14
21.61
24.84
31.55
36.85
52.52
58.30
7.44
8.65
9.91
11.18
12.45
13.52
14.47
16.56
18.76
21.89
23.90
10.39
11.90
13.43
14.92
16.17
17.58
20.01
23.98
28.02
30.63
13.56
15.71
17.06
20.78
23.57
27.17
31.79
34.78
17.26
19.75
24.94
29.12
43.94
44.22
20.73
23.78
30.13
35.13
50.61
56.08
26.54
29.96
32.20
39.35
48.79
52.50
7.10
7.68
8.27
8.85
9.42
10.00
10.56
11.68
12.79
14.42
15.49
10.63
11.44
12.24
13.04
13.83
14.62
16.19
17.73
20.00
21.49
15.26
16.34
17.40
19.52
21.61
23.68
26.73
28.72
31.67
35.10
43.52
46.83
67.81
Roof Purlins
Span
(m)
9.5
10.0
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
12.31
14.10
15.90
17.03
19.14
20.47
23.70
26.92
31.46
34.39
16.07
18.81
20.22
24.41
28.08
31.66
38.21
41.80
20.44
23.39
30.33
35.59
50.77
56.87
26.03
29.81
37.32
43.82
58.25
64.61
11.69
13.39
15.11
16.18
18.19
19.45
22.52
25.58
29.89
32.68
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
9.91
11.34
12.79
14.20
15.38
16.72
19.02
22.78
26.61
29.08
12.93
14.97
16.24
19.77
22.41
25.83
30.20
33.04
16.54
18.90
23.82
27.77
41.83
42.44
19.91
22.80
28.82
33.55
48.80
53.98
9.46
10.82
12.20
13.54
14.66
15.94
18.12
21.70
25.33
27.68
9.54
10.27
10.99
11.70
12.41
13.12
14.53
15.91
17.95
19.29
13.70
14.66
15.62
17.52
19.40
21.25
23.99
25.78
28.42
31.50
39.06
42.03
56.54
60.86
8.61
9.27
9.92
10.56
11.20
11.85
13.11
14.36
16.20
17.41
Span
(m)
Section
Weight
kg/m
Ultimate
UDL
Gravity
kN
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
15.27
17.87
19.21
23.19
26.68
30.08
36.30
39.71
19.42
22.22
28.82
33.82
48.23
54.03
25.02
28.62
35.45
41.63
55.34
61.38
Ultimate
UDL
Suction
kN
Load
to Produce
Deflection
L/180 kN
12.35
14.29
15.50
18.85
21.36
24.61
28.77
31.46
15.86
18.11
22.79
26.55
39.91
40.78
19.14
21.89
27.62
32.11
47.09
52.02
12.36
13.23
14.10
15.81
17.51
19.18
21.65
23.27
25.65
28.43
35.25
37.93
41.12
51.03
54.93
1.0
1.2
1.4
1.6
1.8
2.0
3.78
3.17
2.73
2.38
2.11
1.90
Span
(m)
Section
The designer should not resolve the loadings into normal and
downslope components as they have been taken into account
when compiling this table. Loads are based on the utilisation of
an anti-sag system comprising angle struts at 1/3 span with
diagonal rod ties at a minimum slope to the purlins of 30 and
stiffened cleats. In order to maintain 30 on larger bays, struts
should be positioned at 1/4 intervals as shown on page 14 in the
Multibeam Handbook.
5.0
One set of diagonal rods are required per 6m length of roof slope.
6.5
7.0
M205065150
M205065160
M205065180
M235065160
M205065150
M205065160
M235065160
M235065180
M235065160
M235065180
M235065200
M235065160
M235065180
M235065200
M235065160
M235065180
M235065200
5.5
6.0
UDL
kN
1.2
Purlin Centres m
1.375 1.5
1.675 1.8
20.85
23.06
24.14
24.14
19.17
21.17
23.04
23.04
21.65
22.00
22.00
20.13
21.02
21.02
18.81
20.10
20.10
3.48
3.84
4.02
4.02
2.90
3.21
3.49
3.49
3.01
3.06
3.06
2.58
2.69
2.69
2.24
2.39
2.39
3.03
3.35
3.51
3.51
2.53
2.80
3.05
3.05
2.62
2.67
2.67
2.25
2.35
2.35
1.95
2.09
2.09
2.78
3.08
3.22
3.22
2.32
2.57
2.79
2.79
2.41
2.44
2.44
2.07
2.16
2.16
1.79
1.91
1.91
2.49
2.75
2.88
2.88
2.08
2.30
2.50
2.50
2.15
2.19
2.19
1.85
1.93
1.93
1.60
1.71
1.71
2.32
2.56
2.68
2.68
1.94
2.14
2.33
2.33
2.00
2.04
2.04
1.72
1.80
1.80
1.49
1.60
1.60
37
6.5
38
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
11.93
13.99
16.10
18.15
20.04
24.22
27.94
31.70
37.06
14.08
16.54
19.06
21.62
24.19
26.76
28.82
33.41
37.96
44.48
48.67
19.69
22.73
25.81
28.85
31.69
34.64
40.09
45.66
53.60
58.74
11.10
13.00
14.96
16.84
18.58
22.44
25.86
29.33
34.26
13.14
15.41
17.75
20.10
22.47
24.84
26.74
30.97
35.17
41.16
45.03
18.40
21.20
24.04
26.85
29.46
32.19
37.21
42.34
49.66
54.39
11.93
13.99
16.10
18.15
20.04
24.22
27.94
31.70
37.06
14.08
16.54
19.06
21.62
24.19
26.76
28.82
33.41
37.96
44.48
48.67
19.69
22.73
25.81
28.85
31.69
34.64
40.09
45.66
53.60
58.74
11.10
13.00
14.96
16.84
18.58
22.44
25.86
29.33
34.26
13.14
15.41
17.75
20.10
22.47
24.84
26.74
30.97
35.17
41.16
45.03
18.40
21.20
24.04
26.85
29.46
32.19
37.21
42.34
49.66
54.39
11.93
13.99
16.10
18.15
20.04
24.22
27.94
31.70
37.06
14.08
16.54
19.06
21.62
24.19
26.76
28.82
33.41
37.96
44.48
48.67
19.69
22.73
25.81
28.85
31.69
34.64
40.09
45.66
53.60
58.74
11.10
13.00
14.96
16.84
18.58
22.44
25.86
29.33
34.26
13.14
15.41
17.75
20.10
22.47
24.84
26.74
30.97
35.17
41.16
45.03
18.40
21.20
24.04
26.85
29.46
32.19
37.21
42.34
49.66
54.39
Defl Limit
L/180
kN
Gravity
kN
8.69
9.37
10.05
10.71
11.37
12.65
13.89
15.11
16.85
12.57
13.56
14.53
15.49
16.44
17.39
18.29
20.09
21.84
24.36
25.97
18.69
20.03
21.35
22.65
23.93
25.20
27.67
30.09
33.55
35.76
7.40
7.99
8.56
9.13
9.68
10.78
11.84
12.87
14.36
10.71
11.55
12.38
13.20
14.00
14.82
15.58
17.12
18.61
20.76
22.13
15.92
17.07
18.19
19.30
20.39
21.47
23.58
25.64
28.58
30.47
15.64
18.32
21.09
23.75
26.22
31.66
36.51
41.41
48.39
18.10
21.28
24.57
27.89
31.24
34.58
37.27
43.24
49.18
57.67
63.13
24.86
28.80
32.79
36.76
40.44
44.28
51.38
58.64
68.99
75.68
14.70
17.18
19.73
22.19
24.47
29.48
33.96
38.47
44.90
17.08
20.03
23.07
26.14
29.23
32.32
34.79
40.29
45.77
53.59
58.62
23.50
27.14
30.84
34.50
37.90
41.44
47.98
54.67
64.21
70.38
15.64
18.32
21.09
23.75
26.22
31.66
36.51
41.41
48.39
18.10
21.28
24.57
27.89
31.24
34.58
37.27
43.24
49.18
57.67
63.13
24.86
28.80
32.79
36.76
40.44
44.28
51.38
58.64
68.99
75.68
14.70
17.18
19.73
22.19
24.47
29.48
33.96
38.47
44.90
17.08
20.03
23.07
26.14
29.23
32.32
34.79
40.29
45.77
53.59
58.62
23.50
27.14
30.84
34.50
37.90
41.44
47.98
54.67
64.21
70.38
15.64
18.32
21.09
23.75
26.22
31.66
36.51
41.41
48.39
18.10
21.28
24.57
27.89
31.24
34.58
37.27
43.24
49.18
57.67
63.13
24.86
28.80
32.79
36.76
40.44
44.28
51.38
58.64
68.99
75.68
14.70
17.18
19.73
22.19
24.47
29.48
33.96
38.47
44.90
17.08
20.03
23.07
26.14
29.23
32.32
34.79
40.29
45.77
53.59
58.62
23.50
27.14
30.84
34.50
37.90
41.44
47.98
54.67
64.21
70.38
Defl Limit
L/180
kN
18.11
19.54
20.95
22.33
23.69
26.37
28.96
31.49
35.13
26.20
28.26
30.30
32.30
34.26
36.26
38.13
41.87
45.53
50.78
54.14
38.95
41.76
44.51
47.22
49.89
52.54
57.68
62.72
69.93
74.55
15.43
16.65
17.85
19.03
20.19
22.47
24.68
26.83
29.93
22.33
24.08
25.82
27.52
29.19
30.89
32.49
35.68
38.80
43.27
46.13
33.19
35.59
37.93
40.23
42.51
44.77
49.15
53.44
59.58
63.52
Roof Purlins
Span
(m)
7.0
7.5
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
10.37
12.13
13.95
15.69
17.31
20.89
24.06
27.27
31.84
12.31
14.41
16.58
18.77
20.97
23.17
24.93
28.84
32.73
38.29
41.86
17.24
19.85
22.48
25.10
27.52
30.04
34.69
39.45
46.24
50.62
9.72
11.37
13.06
14.69
16.19
19.52
22.48
25.47
29.72
11.57
13.53
15.55
17.59
19.64
21.69
23.33
26.97
30.60
35.78
39.10
16.22
18.65
21.10
23.54
25.79
28.15
32.48
36.92
43.23
47.31
10.37
12.13
13.95
15.69
17.31
20.89
24.06
27.27
31.84
12.31
14.41
16.58
18.77
20.97
23.17
24.93
28.84
32.73
38.29
41.86
14.43
16.54
18.73
21.11
22.84
24.93
28.74
34.42
40.31
44.10
9.72
11.37
13.06
14.69
16.19
19.52
22.48
25.47
29.72
11.57
13.53
15.55
17.59
19.64
21.69
23.33
26.97
30.60
35.78
39.10
16.22
18.65
21.10
23.54
25.79
28.15
32.48
36.92
43.23
47.31
10.37
12.13
13.95
15.69
17.31
20.89
24.06
27.27
31.84
12.31
14.41
16.58
18.77
20.97
23.17
24.93
28.84
32.73
38.29
41.86
17.24
19.85
22.48
25.10
27.52
30.04
34.69
39.45
46.24
50.62
9.72
11.37
13.06
14.69
16.19
19.52
22.48
25.47
29.72
11.57
13.53
15.55
17.59
19.64
21.69
23.33
26.97
30.60
35.78
39.10
16.22
18.65
21.10
23.54
25.79
28.15
32.48
36.92
43.23
47.31
Defl Limit
L/180
kN
Gravity
kN
6.38
6.88
7.38
7.87
8.35
9.29
10.21
11.10
12.38
9.23
9.96
10.68
11.38
12.08
12.78
13.44
14.76
16.05
17.90
19.08
13.73
14.72
15.69
16.64
17.58
18.52
20.33
22.10
24.65
26.27
5.56
6.00
6.43
6.86
7.27
8.10
8.89
9.67
10.78
8.04
8.68
9.30
9.91
10.52
11.13
11.70
12.86
13.98
15.59
16.62
11.96
12.82
13.66
14.50
15.32
16.13
17.71
19.26
21.47
22.89
13.85
16.16
18.53
20.81
22.92
27.58
31.72
35.90
41.86
16.16
18.90
21.72
24.58
27.45
30.31
32.61
37.71
42.78
50.03
54.69
22.25
25.64
29.07
32.47
35.63
38.92
44.98
51.19
60.03
65.74
13.08
15.23
17.45
19.58
21.54
25.89
29.75
33.65
39.20
15.31
17.87
20.51
23.18
25.85
28.52
30.66
35.42
40.14
46.89
51.23
21.11
24.28
27.48
30.65
33.59
36.66
42.32
48.10
56.33
61.65
13.85
16.16
18.53
20.81
22.92
27.58
31.72
35.90
41.86
16.16
18.90
21.72
24.58
27.45
30.31
32.61
37.71
42.78
50.03
54.69
18.63
21.37
24.21
27.32
29.58
32.29
37.26
44.65
52.33
57.28
13.08
15.23
17.45
19.58
21.54
25.89
29.75
33.65
39.20
15.31
17.87
20.51
23.18
25.85
28.52
30.66
35.42
40.14
46.89
51.23
21.11
24.28
27.48
30.65
33.59
36.66
42.32
48.10
56.33
61.65
13.85
16.16
18.53
20.81
22.92
27.58
31.72
35.90
41.86
16.16
18.90
21.72
24.58
27.45
30.31
32.61
37.71
42.78
50.03
54.69
22.25
25.64
29.07
32.47
35.63
38.92
44.98
51.19
60.03
65.74
13.08
15.23
17.45
19.58
21.54
25.89
29.75
33.65
39.20
15.31
17.87
20.51
23.18
25.85
28.52
30.66
35.42
40.14
46.89
51.23
21.11
24.28
27.48
30.65
33.59
36.66
42.32
48.10
56.33
61.65
Defl Limit
L/180
kN
13.31
14.35
15.39
16.41
17.41
19.37
21.28
23.14
25.81
19.25
20.76
22.26
23.73
25.17
26.64
28.01
30.76
33.45
37.31
39.77
28.62
30.68
32.70
34.69
36.65
38.60
42.38
46.08
51.38
54.77
11.59
12.50
13.41
14.29
15.16
16.88
18.54
20.16
22.48
16.77
18.09
19.39
20.67
21.93
23.21
24.40
26.80
29.14
32.50
34.65
24.93
26.73
28.49
30.22
31.93
33.62
36.92
40.14
44.76
47.71
39
8.5
40
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
9.14
10.68
12.27
13.79
15.20
18.32
21.08
23.88
27.86
10.90
12.74
14.62
16.54
18.46
20.38
21.91
25.32
28.71
33.55
36.66
15.29
17.57
19.86
22.15
24.26
26.46
30.52
34.67
40.58
44.39
10.29
12.02
13.80
15.60
17.40
19.20
20.64
23.84
27.03
31.57
34.48
14.45
16.59
18.76
20.90
22.89
24.96
28.76
32.67
38.21
41.79
19.24
22.13
24.28
29.33
33.98
38.48
45.72
50.05
8.61
9.98
11.38
12.74
14.01
16.75
19.23
21.70
25.24
10.06
11.68
13.34
15.04
16.74
18.18
19.65
22.18
24.90
28.70
31.11
13.95
15.94
17.98
20.58
21.88
24.06
27.38
32.65
38.10
41.63
7.96
9.26
10.59
11.94
13.31
14.46
15.61
17.65
19.82
22.89
24.85
11.05
12.64
14.26
16.38
17.39
19.14
21.81
26.18
30.63
33.52
14.57
16.56
18.37
22.24
25.49
29.53
33.95
37.20
9.14
10.68
12.27
13.79
15.20
18.32
21.08
23.88
27.86
10.90
12.74
14.62
16.54
18.46
20.38
21.91
25.32
28.71
33.55
36.66
15.29
17.57
19.86
22.15
24.26
26.46
30.52
34.67
40.58
44.39
10.29
12.02
13.80
15.60
17.40
19.20
20.64
23.67
26.52
30.54
33.10
14.45
16.59
18.76
20.90
22.89
24.96
28.76
32.67
38.21
41.79
19.24
22.13
24.28
29.33
33.98
38.48
45.57
49.74
Defl Limit
L/180
kN
4.89
5.27
5.65
6.03
6.39
7.12
7.82
8.50
9.48
7.07
7.63
8.18
8.71
9.25
9.78
10.29
11.30
12.29
13.70
14.61
10.51
11.27
12.01
12.74
13.46
14.18
15.56
16.92
18.87
20.11
6.26
6.75
7.24
7.72
8.19
8.68
9.11
10.01
10.88
12.14
12.94
9.31
9.98
10.64
11.29
11.92
12.56
13.79
14.99
16.72
17.82
13.26
14.13
14.99
16.67
18.30
19.90
22.18
23.63
Gravity
kN
12.38
14.39
16.47
18.46
20.30
24.38
27.98
31.64
36.82
14.54
16.94
19.41
21.91
24.42
26.92
28.92
33.37
37.79
44.11
48.17
20.06
23.03
26.03
29.01
31.76
34.63
39.93
45.34
53.04
58.02
13.82
16.08
18.41
20.77
23.12
25.48
27.35
31.54
35.69
41.62
45.43
19.09
21.89
24.72
27.51
30.11
32.81
37.77
42.87
50.10
54.77
25.08
28.85
31.67
38.24
44.32
50.18
59.63
65.27
11.65
13.46
15.29
17.06
18.71
22.30
25.53
28.75
33.37
13.41
15.53
17.71
19.92
22.14
24.02
25.94
29.24
32.77
37.72
40.88
18.31
20.90
23.56
26.96
28.64
31.48
35.82
42.70
49.80
54.42
10.69
12.39
14.14
15.90
17.68
19.18
20.67
23.33
26.17
30.18
32.73
14.60
16.68
18.79
21.56
22.87
25.17
28.64
34.36
40.15
43.92
19.01
21.60
23.95
28.99
33.24
38.51
44.28
48.52
12.38
14.39
16.47
18.46
20.30
24.38
27.98
31.64
36.82
14.54
16.94
19.41
21.91
24.42
26.92
28.92
33.37
37.79
44.11
48.17
20.06
23.03
26.03
29.01
31.76
34.63
39.93
45.34
53.04
58.02
13.82
16.08
18.41
20.77
23.12
25.48
27.35
31.31
35.02
40.26
43.60
19.09
21.89
24.72
27.51
30.11
32.81
37.77
42.87
50.10
54.77
25.08
28.85
31.67
38.24
44.32
50.18
59.43
64.87
Defl Limit
L/180
kN
10.19
10.99
11.78
12.56
13.33
14.83
16.29
17.71
19.76
14.74
15.89
17.04
18.17
19.27
20.39
21.45
23.55
25.61
28.56
30.45
21.91
23.49
25.04
26.56
28.06
29.55
32.45
35.28
39.34
41.93
13.05
14.08
15.10
16.09
17.07
18.06
19.00
20.86
22.69
25.30
26.97
19.41
20.81
22.18
23.53
24.86
26.18
28.74
31.25
34.84
37.14
27.64
29.46
31.24
34.76
38.15
41.48
46.23
49.27
Roof Purlins
Span
(m)
9.0
Span
(m)
9.5
Defl Limit
L/180
kN
Section
Self
Weight
kg/m
Gravity
kN
M205605120
M205605130
M205605140
M205605150
M205605160
M205605170
M205605180
M205605200
M205605220
M205605250
M205605270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
9.75
11.38
13.05
14.75
16.45
18.15
19.50
22.52
25.52
29.80
32.54
13.70
15.71
17.76
19.78
21.65
23.61
27.19
30.87
36.09
39.47
18.24
20.97
23.00
27.77
32.15
36.39
43.21
47.29
Section
Self
Weight
kg/m
Gravity
kN
External Uplift kN
Three
Restraints
Defl Limit
L/180
kN/m2
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
13.01
14.92
16.85
18.76
20.53
22.37
25.76
29.24
34.17
37.36
17.33
19.91
21.84
26.34
30.49
34.49
40.95
44.79
11.16
12.75
14.36
15.95
17.42
18.96
21.78
25.27
29.50
32.23
14.74
16.80
18.48
22.29
25.59
29.19
34.12
37.32
7.46
7.99
8.52
9.03
9.55
10.05
11.04
12.00
13.38
14.26
10.61
11.31
12.00
13.35
14.65
15.93
17.75
18.92
6.37
7.42
8.50
9.59
10.68
11.61
12.51
14.17
15.93
18.42
20.03
8.86
10.13
11.44
13.15
13.96
15.39
17.54
21.15
24.79
27.16
11.67
13.28
14.73
17.86
20.48
23.77
27.33
29.86
8.78
10.18
11.62
13.08
14.55
15.79
16.97
19.16
21.50
24.80
26.92
12.18
13.91
15.67
18.06
19.00
21.03
23.76
28.34
33.07
36.11
16.07
18.21
20.13
24.40
27.82
32.12
36.91
40.33
5.59
6.02
6.46
6.88
7.30
7.73
8.13
8.93
9.71
10.83
11.54
8.31
8.90
9.49
10.07
10.64
11.20
12.30
13.37
14.91
15.89
11.83
12.60
13.37
14.87
16.32
17.75
19.78
21.08
Gravity
kN
13.17
15.30
17.50
19.72
21.95
24.17
25.94
29.87
33.80
39.38
42.97
18.20
20.84
23.52
26.15
28.60
31.15
35.83
40.63
47.45
51.85
23.93
27.50
30.15
36.36
42.08
47.61
56.52
61.84
8.61
9.98
11.39
12.82
14.26
15.46
16.63
18.79
21.09
24.35
26.44
11.76
13.44
15.15
17.40
18.44
20.30
23.11
27.85
32.59
35.69
15.32
17.41
19.31
23.38
26.82
31.10
35.75
39.05
Internal Uplift kN
Gravity
Three
kN
Restraints
17.39
19.88
22.41
24.91
27.23
29.63
34.07
38.60
45.05
49.21
22.87
26.24
28.76
34.64
40.05
45.28
53.70
58.73
14.67
16.72
18.81
20.87
22.77
24.77
28.42
32.95
38.41
41.95
19.17
21.84
24.01
28.95
33.22
37.88
44.26
48.38
11.86
13.70
15.58
17.49
19.41
21.02
22.57
25.43
28.48
32.79
35.54
16.18
18.45
20.75
23.88
25.09
27.76
31.31
37.31
43.47
47.45
21.09
23.87
26.39
31.95
36.41
42.03
48.28
52.74
Defl Limit
L/180
kN
11.64
12.56
13.47
14.35
15.23
16.11
16.95
18.61
20.24
22.57
24.06
17.31
18.56
19.78
20.99
22.17
23.35
25.64
27.88
31.08
33.13
24.66
26.27
27.87
31.00
34.03
37.00
41.24
43.95
Defl Limit
L/180
kN
15.54
16.66
17.76
18.83
19.90
20.96
23.01
25.02
27.89
29.74
22.13
23.58
25.01
27.83
30.54
33.21
37.01
39.45
41
10.5
11.0
42
Section
Self
Weight
kg/m
Gravity
kN
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
12.37
14.19
16.02
17.83
19.51
21.26
24.47
27.76
32.44
35.46
16.50
18.95
20.78
25.04
28.98
32.77
38.89
42.54
11.79
13.51
15.26
16.98
18.57
20.24
23.29
26.42
30.86
33.73
15.74
18.07
19.80
23.86
27.59
31.21
37.01
40.48
15.04
17.26
18.91
22.77
26.32
29.77
35.30
38.60
10.70
12.21
13.74
15.26
16.66
18.12
20.81
24.13
28.16
30.76
14.12
16.08
17.68
21.31
24.45
27.88
32.57
35.61
10.28
11.72
13.18
14.63
15.96
17.36
19.93
23.10
26.94
29.43
13.56
15.44
16.96
20.42
23.42
26.68
31.16
34.06
13.04
14.83
16.29
19.60
22.47
25.60
29.89
32.66
Defl Limit
L/180
kN
6.73
7.21
7.69
8.16
8.61
9.07
9.96
10.83
12.08
12.87
9.58
10.21
10.83
12.05
13.22
14.38
16.02
17.08
6.10
6.54
6.97
7.39
7.82
8.23
9.04
9.82
10.96
11.68
8.69
9.26
9.82
10.93
11.99
13.04
14.53
15.49
7.92
8.44
8.95
9.95
10.93
11.88
13.24
14.11
Gravity
kN
Defl Limit
L/180
kN
16.62
19.00
21.40
23.77
25.97
28.25
32.45
36.75
42.86
46.81
21.88
25.09
27.47
33.05
38.19
43.15
51.14
55.91
15.92
18.18
20.46
22.72
24.81
26.99
30.96
35.06
40.87
44.61
20.97
24.02
26.29
31.59
36.48
41.19
48.79
53.32
20.12
23.03
25.19
30.25
34.90
39.39
46.64
50.95
14.10
16.06
18.05
20.01
21.82
23.71
27.20
31.50
36.70
40.06
18.42
20.97
23.04
27.74
31.80
36.24
42.30
46.23
13.58
15.45
17.35
19.22
20.95
22.75
26.07
30.18
35.14
38.35
17.75
20.17
22.14
26.63
30.50
34.73
40.52
44.27
17.11
19.44
21.32
25.61
29.32
33.36
38.90
42.47
14.02
15.03
16.02
17.00
17.96
18.91
20.77
22.58
25.18
26.84
19.97
21.28
22.58
25.11
27.56
29.97
33.40
35.60
12.72
13.64
14.53
15.42
16.29
17.15
18.84
20.48
22.83
24.34
18.11
19.31
20.47
22.78
25.00
27.18
30.29
32.29
16.50
17.59
18.66
20.76
22.78
24.77
27.60
29.42
Roof Purlins
Table 1:16 Single Span
Span
(m)
6.0
6.5
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
12.52
14.67
16.90
19.15
21.42
25.88
30.13
34.18
39.96
15.30
17.96
20.70
23.48
26.27
29.05
31.78
37.05
42.08
49.31
53.95
21.35
24.65
27.98
31.33
34.67
37.95
44.31
50.41
59.17
64.84
11.65
13.64
15.69
17.77
19.86
23.98
27.90
31.64
36.95
14.28
16.74
19.27
21.83
24.41
26.98
29.49
34.35
38.99
45.64
49.92
19.95
22.99
26.07
29.16
32.24
35.27
41.13
46.75
54.83
60.05
12.52
14.67
16.90
19.15
21.42
25.88
30.13
34.18
39.96
15.30
17.96
20.70
23.48
26.27
29.05
31.78
37.05
42.08
49.31
53.95
21.35
24.65
27.98
31.33
34.67
37.95
44.31
50.41
59.17
64.84
11.65
13.64
15.69
17.77
19.86
23.98
27.90
31.64
36.95
14.28
16.74
19.27
21.83
24.41
26.98
29.49
34.35
38.99
45.64
49.92
19.95
22.99
26.07
29.16
32.24
35.27
41.13
46.75
54.83
60.05
12.52
14.67
16.90
19.15
21.42
25.88
30.13
34.18
39.96
15.30
17.96
20.70
23.48
26.27
29.05
31.78
37.05
42.08
49.31
53.95
21.35
24.65
27.98
31.33
34.67
37.95
44.31
50.41
59.17
64.84
11.65
13.64
15.69
17.77
19.86
23.98
27.90
31.64
36.95
14.28
16.74
19.27
21.83
24.41
26.98
29.49
34.35
38.99
45.64
49.92
19.95
22.99
26.07
29.16
32.24
35.27
41.13
46.75
54.83
60.05
Defl Limit
L/180
kN
Gravity
kN
8.69
9.37
10.05
10.71
11.37
12.65
13.89
15.11
16.85
12.57
13.56
14.53
15.49
16.44
17.39
18.29
20.09
21.84
24.36
25.97
18.69
20.03
21.35
22.65
23.93
25.20
27.67
30.09
33.55
35.76
7.40
7.99
8.56
9.13
9.68
10.78
11.84
12.87
14.36
10.71
11.55
12.38
13.20
14.00
14.82
15.58
17.12
18.61
20.76
22.13
15.92
17.07
18.19
19.30
20.39
21.47
23.58
25.64
28.58
30.47
16.41
19.22
22.12
25.06
28.01
33.82
39.36
44.64
52.17
19.65
23.11
26.67
30.28
33.91
37.53
41.08
47.94
54.50
63.91
69.96
26.96
31.22
35.55
39.90
44.23
48.50
56.78
64.72
76.14
83.53
15.42
18.02
20.70
23.41
26.14
31.51
36.61
41.48
48.41
18.55
21.76
25.04
28.39
31.73
35.08
38.35
44.68
50.73
59.40
64.97
25.49
29.43
33.44
37.45
41.46
45.40
53.03
60.35
70.88
77.68
16.41
19.22
22.12
25.06
28.01
33.82
39.36
44.64
52.17
19.65
23.11
26.67
30.28
33.91
37.53
41.08
47.94
54.50
63.91
69.96
26.96
31.22
35.55
39.90
44.23
48.50
56.78
64.72
76.14
83.53
15.42
18.02
20.70
23.41
26.14
31.51
36.61
41.48
48.41
18.55
21.76
25.04
28.39
31.73
35.08
38.35
44.68
50.73
59.40
64.97
25.49
29.43
33.44
37.45
41.46
45.40
53.03
60.35
70.88
77.68
16.41
19.22
22.12
25.06
28.01
33.82
39.36
44.64
52.17
19.65
23.11
26.67
30.28
33.91
37.53
41.08
47.94
54.50
63.91
69.96
26.96
31.22
35.55
39.90
44.23
48.50
56.78
64.72
76.14
83.53
15.42
18.02
20.70
23.41
26.14
31.51
36.61
41.48
48.41
18.55
21.76
25.04
28.39
31.73
35.08
38.35
44.68
50.73
59.40
64.97
25.49
29.43
33.44
37.45
41.46
45.40
53.03
60.35
70.88
77.68
Defl Limit
L/180
kN
18.11
19.54
20.95
22.33
23.69
26.37
28.96
31.49
35.13
26.20
28.26
30.30
32.30
34.26
36.26
38.13
41.87
45.53
50.78
54.14
38.95
41.76
44.51
47.22
49.89
52.54
57.68
62.72
69.93
74.55
15.43
16.65
17.85
19.03
20.19
22.47
24.68
26.83
29.93
22.33
24.08
25.82
27.52
29.19
30.89
32.49
35.68
38.80
43.27
46.13
33.19
35.59
37.93
40.23
42.51
44.77
49.15
53.44
59.58
63.52
43
7.5
44
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
10.89
12.73
14.64
16.57
18.51
22.32
25.96
29.42
34.35
13.38
15.66
18.01
20.39
22.78
25.17
27.49
32.00
36.30
42.46
46.42
18.70
21.53
24.39
27.26
30.11
32.92
38.36
43.58
51.06
55.90
10.21
11.93
13.71
15.51
17.32
20.87
24.26
27.48
32.07
12.57
14.70
16.89
19.11
21.34
23.57
25.73
29.93
33.95
39.68
43.37
17.60
20.23
22.89
25.57
28.24
30.86
35.93
40.78
47.75
52.25
10.89
12.73
14.64
16.57
18.51
22.32
25.96
29.42
34.35
13.38
15.66
18.01
20.39
22.78
25.17
27.49
32.00
36.30
42.46
46.42
15.65
17.94
20.31
22.93
25.00
27.32
31.78
38.01
44.51
48.70
10.21
11.93
13.71
15.51
17.32
20.87
24.26
27.48
32.07
12.57
14.70
16.89
19.11
21.34
23.57
25.73
29.93
33.95
39.68
43.37
17.60
20.23
22.89
25.57
28.24
30.86
35.93
40.78
47.75
52.25
10.89
12.73
14.64
16.57
18.51
22.32
25.96
29.42
34.35
13.38
15.66
18.01
20.39
22.78
25.17
27.49
32.00
36.30
42.46
46.42
18.70
21.53
24.39
27.26
30.11
32.92
38.36
43.58
51.06
55.90
10.21
11.93
13.71
15.51
17.32
20.87
24.26
27.48
32.07
12.57
14.70
16.89
19.11
21.34
23.57
25.73
29.93
33.95
39.68
43.37
17.60
20.23
22.89
25.57
28.24
30.86
35.93
40.78
47.75
52.25
Defl Limit
L/180
kN
Gravity
kN
6.38
6.88
7.38
7.87
8.35
9.29
10.21
11.10
12.38
9.23
9.96
10.68
11.38
12.08
12.78
13.44
14.76
16.05
17.90
19.08
13.73
14.72
15.69
16.64
17.58
18.52
20.33
22.10
24.65
26.27
5.56
6.00
6.43
6.86
7.27
8.10
8.89
9.67
10.78
8.04
8.68
9.30
9.91
10.52
11.13
11.70
12.86
13.98
15.59
16.62
11.96
12.82
13.66
14.50
15.32
16.13
17.71
19.26
21.47
22.89
14.53
16.95
19.44
21.96
24.49
29.47
34.21
38.72
45.14
17.55
20.52
23.59
26.69
29.80
32.91
35.95
41.82
47.43
55.46
60.63
24.14
27.81
31.53
35.26
38.98
42.64
49.72
56.51
66.26
72.58
13.73
15.98
18.31
20.66
23.03
27.67
32.09
36.29
42.27
16.64
19.19
22.28
25.17
28.07
30.98
33.81
39.29
44.51
52.00
56.81
22.90
26.33
29.80
33.29
36.76
40.18
46.78
53.11
62.20
68.07
14.53
16.95
19.44
21.96
24.49
29.47
34.21
38.72
45.14
17.55
20.52
23.59
26.69
29.80
32.91
35.95
41.82
47.43
55.46
60.63
20.20
23.18
26.26
29.67
32.35
35.38
41.19
49.29
57.77
63.24
13.73
15.98
18.31
20.66
23.03
27.67
32.09
36.29
42.27
16.64
19.41
22.28
25.17
28.07
30.98
33.81
39.29
44.51
52.00
56.81
22.90
26.33
29.80
33.29
36.76
40.18
46.78
53.11
62.20
68.07
14.53
16.95
19.44
21.96
24.49
29.47
34.21
38.72
45.14
17.55
20.52
23.59
26.69
29.80
32.91
35.95
41.82
47.43
55.46
60.63
24.14
27.81
31.53
35.26
38.98
42.64
49.72
56.51
66.26
72.58
13.73
15.98
18.31
20.66
23.03
27.67
32.09
36.29
42.27
16.64
19.41
22.28
25.17
28.07
30.98
33.81
39.29
44.51
52.00
56.81
22.90
26.33
29.80
33.29
36.76
40.18
46.78
53.11
62.20
68.07
Defl Limit
L/180
kN
13.31
14.35
15.39
16.41
17.41
19.37
21.28
23.14
25.81
19.25
20.76
22.26
23.73
25.17
26.64
28.01
30.76
33.45
37.31
39.77
28.62
30.68
32.70
34.69
36.65
38.60
42.38
46.08
51.38
54.77
11.59
12.50
13.41
14.29
15.16
16.88
18.54
20.16
22.48
16.77
18.09
19.39
20.67
21.93
23.21
24.40
26.80
29.14
32.50
34.65
24.93
26.73
28.49
30.22
31.93
33.62
36.92
40.14
44.76
47.71
Roof Purlins
Span
(m)
8.0
8.5
Section
Self
Weight
kg/m
Gravity
kN
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
9.60
11.22
12.88
14.57
16.26
19.58
23.07
25.77
30.06
11.85
13.84
15.90
17.98
20.06
22.14
24.18
28.10
31.86
37.22
40.68
16.59
19.06
21.56
24.06
26.56
29.02
33.76
38.30
44.82
49.04
11.19
13.07
15.00
16.96
18.91
20.88
22.79
26.48
30.00
35.04
38.28
15.69
18.01
20.37
22.72
25.07
27.37
31.83
36.10
42.22
46.18
21.16
23.93
26.71
32.19
37.46
42.53
49.81
54.53
9.03
10.48
11.95
13.46
14.98
17.91
20.76
23.42
27.24
10.93
12.70
14.50
16.34
18.19
19.75
21.69
24.63
27.62
31.84
34.52
15.14
17.30
19.51
22.37
23.95
26.38
30.29
36.07
42.09
46.00
11.19
10.07
11.52
12.99
14.47
15.71
17.22
19.59
22.00
25.41
27.58
12.00
13.73
15.49
17.80
19.04
21.00
24.13
28.93
33.84
37.03
16.02
17.91
20.20
24.40
28.11
32.63
36.99
40.53
9.60
11.22
12.88
14.57
16.26
19.58
23.07
25.77
30.06
11.85
13.84
15.90
17.98
20.06
22.14
24.18
28.10
31.86
37.22
40.68
16.59
19.06
21.56
24.06
26.56
29.02
33.76
38.30
44.82
49.04
11.19
13.07
15.00
16.96
18.91
20.88
22.79
26.28
29.44
33.90
36.73
15.69
18.01
20.37
22.72
25.07
27.37
31.83
36.10
42.22
46.18
21.16
23.93
26.71
32.19
37.46
42.53
49.65
54.19
Defl Limit
L/180
kN
Gravity
kN
4.89
5.27
5.65
6.03
6.39
7.12
7.82
8.50
9.48
7.07
7.63
8.18
8.71
9.25
9.78
10.29
11.30
12.29
13.70
14.61
10.51
11.27
12.01
12.74
13.46
14.18
15.56
16.92
18.87
20.11
6.26
6.75
7.24
7.72
8.19
8.67
9.11
10.01
10.88
12.14
12.94
9.31
9.98
10.64
11.29
11.92
12.56
13.79
14.99
16.72
17.82
13.26
14.13
14.99
16.67
18.30
19.90
22.18
23.63
12.99
15.10
17.29
19.50
21.71
26.06
30.19
34.13
39.73
15.79
18.40
21.08
23.80
26.52
29.24
31.90
37.02
41.91
48.92
53.42
21.76
24.98
28.24
31.50
34.76
37.96
44.14
50.07
58.58
64.07
15.02
17.48
20.00
22.56
25.12
27.68
30.18
34.99
39.59
46.16
50.39
20.71
23.75
26.82
29.89
32.95
35.96
41.78
47.35
55.34
60.49
27.57
31.19
34.81
41.96
48.83
55.43
64.93
71.09
12.22
14.12
16.04
18.02
20.01
23.83
27.54
31.02
36.00
14.57
16.87
19.24
21.64
24.05
26.09
28.61
32.45
36.34
41.83
45.34
19.86
22.68
25.55
29.28
31.34
34.50
39.61
47.15
55.00
60.10
15.02
13.46
15.36
17.28
19.21
20.83
22.81
25.90
29.04
33.47
36.31
15.84
18.10
20.39
23.42
25.03
27.59
31.67
37.94
44.34
48.51
20.88
23.34
26.32
31.81
36.64
42.54
48.22
52.84
12.99
15.10
17.29
19.50
21.71
26.06
30.19
34.13
39.73
15.79
18.40
21.08
23.80
26.52
29.24
31.90
37.02
41.91
48.92
53.42
21.76
24.98
28.24
31.50
34.76
37.96
44.14
50.07
58.58
64.07
15.02
17.48
20.00
22.56
25.12
27.68
30.18
34.74
38.85
44.66
48.36
20.71
23.75
26.82
29.89
32.95
35.96
41.78
47.35
55.34
60.49
27.57
31.19
34.81
41.96
48.83
55.43
64.72
70.65
Defl Limit
L/180
kN
10.19
10.99
11.78
12.56
13.33
14.83
16.29
17.71
19.76
14.74
15.89
17.04
18.17
19.27
20.39
21.45
23.55
25.61
28.56
30.45
21.91
23.49
25.04
26.56
28.06
29.55
32.45
35.28
39.34
41.93
13.05
14.08
15.10
16.09
17.07
18.06
19.00
20.86
22.69
25.30
26.97
19.41
20.81
22.18
23.53
24.86
26.18
28.74
31.25
34.84
37.14
27.64
29.46
31.24
34.76
38.15
41.48
46.23
49.27
45
Span
(m)
9.5
46
Defl Limit
L/180
kN
Gravity
kN
5.59
6.02
6.46
6.88
7.30
7.73
8.13
8.93
9.71
10.83
11.54
8.31
8.90
9.49
10.07
10.64
11.20
12.30
13.37
14.91
15.89
11.83
12.60
13.37
14.87
16.32
17.75
19.78
21.08
14.31
16.63
19.02
21.43
23.85
26.26
28.62
33.17
37.49
43.70
47.67
19.76
22.62
25.52
28.42
31.31
34.15
39.64
44.88
52.42
57.28
26.31
29.72
33.14
39.89
46.38
52.61
61.56
67.36
Section
Self
Weight
kg/m
Gravity
kN
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
10.60
12.38
14.19
16.04
17.88
19.73
21.54
25.01
28.33
33.08
36.14
14.88
17.06
19.28
21.50
23.72
25.89
30.10
34.12
39.89
43.61
20.06
22.68
25.30
30.47
35.45
40.22
47.09
51.53
Section
Self
Weight
kg/m
Gravity
kN
External Uplift kN
Three
Restraints
Defl Limit
L/180
kN
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
11.73
13.46
15.20
16.95
18.70
20.41
23.69
26.83
31.31
34.20
14.13
16.20
18.30
20.41
22.50
24.56
28.53
32.33
37.78
41.31
19.07
21.55
24.03
28.92
33.62
38.13
44.63
48.82
10.10
11.52
12.98
14.43
15.88
17.30
20.05
22.66
26.42
28.84
12.07
13.78
15.52
17.26
18.99
20.70
24.01
27.15
31.70
34.65
16.14
18.18
20.24
24.27
28.17
31.90
37.29
40.77
5.41
5.80
6.18
6.56
6.94
7.30
8.01
8.71
9.72
10.36
7.46
7.99
8.52
9.03
9.55
10.05
11.04
12.00
13.38
14.26
10.61
11.31
12.00
13.35
14.65
15.93
17.75
18.92
6.94
8.07
9.23
10.42
11.62
12.62
13.82
15.73
17.69
20.46
22.23
9.61
11.01
12.42
14.30
15.29
16.88
19.41
23.38
27.41
30.02
12.84
14.36
16.20
19.60
22.59
26.28
29.78
32.54
9.55
11.08
12.64
14.22
15.82
17.15
18.74
21.29
23.88
27.54
29.88
13.22
15.10
17.01
19.63
20.81
23.08
26.30
31.33
36.55
39.91
17.68
19.69
22.14
26.78
30.67
35.51
40.22
43.95
9.36
10.85
12.38
13.92
15.49
16.79
18.36
20.86
23.40
27.02
29.33
12.77
14.58
16.43
18.90
20.19
22.27
25.57
30.76
36.01
39.43
16.84
18.82
21.22
25.65
29.56
34.37
38.94
42.53
Internal Uplift kN
Gravity
Three
kN
Restraints
15.86
18.12
20.40
22.69
24.98
27.20
31.50
35.60
41.46
45.22
18.87
21.58
24.32
27.08
29.81
32.50
37.69
42.66
49.77
54.37
25.15
28.38
31.62
38.01
44.15
50.03
58.50
63.98
13.40
15.25
17.14
19.02
20.90
22.74
26.30
29.68
34.53
37.66
15.86
18.09
20.34
22.60
24.84
27.06
31.33
35.42
41.29
45.10
21.00
23.65
26.31
31.54
36.58
41.41
48.39
52.91
12.90
14.89
16.93
19.01
21.10
22.83
24.90
28.22
31.59
36.38
39.43
17.56
20.02
22.51
25.95
27.48
30.44
34.64
41.21
48.02
52.42
23.18
25.80
29.01
35.06
40.13
46.44
52.59
57.45
Defl Limit
L/180
kN
11.64
12.56
13.47
14.35
15.23
16.11
16.95
18.61
20.24
22.57
24.06
17.31
18.56
19.78
20.99
22.17
23.35
25.64
27.88
31.08
33.13
24.66
26.27
27.87
31.00
34.03
37.00
41.24
43.95
Defl Limit
L/180
kN
11.27
12.09
12.88
13.67
14.46
15.21
16.70
18.16
20.25
21.59
15.54
16.66
17.76
18.83
19.90
20.96
23.01
25.02
27.89
29.74
22.13
23.58
25.01
27.83
30.54
33.21
37.01
39.45
Roof Purlins
Span
(m)
10.0
10.5
11.0
Section
Self
Weight
kg/m
Gravity
kN
Defl Limit
L/180
kN
Gravity
kN
Defl Limit
L/180
kN
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
13.44
15.41
17.40
19.40
21.38
23.34
27.10
30.71
35.88
39.21
18.16
20.51
22.86
27.51
31.97
36.25
42.40
46.37
12.82
14.69
16.58
18.48
20.37
22.22
25.80
29.23
34.14
37.31
17.33
19.56
21.80
26.22
30.45
34.52
40.36
44.14
16.56
18.69
20.82
25.03
29.06
32.93
38.50
42.10
11.56
13.19
14.85
16.51
18.16
19.78
22.92
25.93
30.25
33.05
15.46
17.40
19.36
23.20
26.91
30.46
35.59
38.91
11.10
12.65
14.24
15.82
17.40
18.94
21.95
24.81
28.94
31.61
14.84
16.70
18.55
22.23
25.77
29.15
34.04
37.21
14.27
16.05
17.83
21.34
24.72
27.96
32.64
35.67
6.73
7.21
7.69
8.16
8.61
9.07
9.96
10.83
12.08
12.87
9.58
10.21
10.83
12.05
13.22
14.38
16.02
17.08
6.10
6.54
6.97
7.39
7.82
8.23
9.04
9.82
10.96
11.68
8.69
9.26
9.82
10.93
11.99
13.04
14.53
15.49
7.92
8.44
8.95
9.95
10.93
11.88
13.24
14.11
18.05
20.62
23.23
25.84
28.44
30.99
35.91
40.62
47.37
51.73
24.07
27.14
30.21
36.28
42.10
47.69
55.72
60.91
17.28
19.74
22.22
24.71
27.17
29.60
34.28
38.76
45.17
49.32
23.07
25.99
28.92
34.69
40.23
45.54
53.17
58.11
22.13
24.93
27.71
33.22
38.50
43.56
50.83
55.53
15.24
17.36
19.51
21.66
23.80
25.90
29.97
33.85
39.45
43.06
20.18
22.71
25.23
30.22
35.02
39.61
46.24
50.54
14.67
16.70
18.74
20.80
22.84
24.85
28.73
32.43
37.77
41.21
19.43
21.84
24.26
29.01
33.58
37.96
44.29
48.38
18.73
21.03
23.34
27.90
32.26
36.45
42.50
46.41
14.02
15.03
16.02
17.00
17.96
18.91
20.77
22.58
25.18
26.84
19.97
21.28
22.58
25.11
27.56
29.97
33.40
35.60
12.72
13.64
14.53
15.42
16.29
17.15
18.84
20.48
22.83
24.34
18.11
19.31
20.47
22.78
25.00
27.18
30.29
32.29
16.50
17.59
18.66
20.76
22.78
24.77
27.60
29.42
47
EVOLVED
M
A
E
LTIB
U
M
Overview
50
Restraint Systems
51
Construction Details
52
56
Section Properties
59
Load Charts
60
E265/200
E265/150
E215/170
E185/140
49
Eaves Beams
Eaves Beams
Eaves Beam
Applications
- Intersection between roof and wall cladding
- Double, monopitch, mansard, curved or flat roof applications
- Roof Slopes from -6 to +30
- Internal or external gutter arrangements
Material Specification
Hot dip galvanised steel to BS EN 10326:2004 and BS EN
10143:1993 specifications for continuously hot dip zinc/metal
coated structural steel strip.
The minimum grade of steel used is S390GD, with Z275 zinc
coating, giving an average coating thickness of 0.02mm to each
side. Other galvanised coatings may be available.
Please contact our Technical Department for advice.
Sustainability
Recycling
Steel is one of the worlds most recycled materials
with over 40% of new steel made from recycled
steel. Kingspans suppliers encourage, promote
and assist in the return of steel for recycling.
Certification
Kingspan Structural Products has developed a fully integrated
management system which combines all the common elements of
ISO 9001 (Quality), ISO 14001 (Environment) and OHSAS
18001 (Occupational Health and Safety) into one system. This
simple coherent business management system enables the
organisation to successfully achieve its purpose and mission to
ensure that quality; safety and the environment are considered in
all aspects of the business process. Further information on these
certifications can be found on our website
www.kingspanstructural.co.uk.
Range
50
simpl
ify yo
ur
eaves
beam
d
esign
- use
the t
o
o
lkit
design
softw
are.
Eaves Beams
Bays up to 6.1m
Strut at mid span
First purlin
51
Flashing
Roof cladding
Purlin
Stanchion
bracket
Vertical
cladding
Eaves
Beam
Main frame
Stooling
dimension
Purlin
Cleat
Stanchion
bracket
Streamline
gutter
Vertical
cladding
Stooling
dimension
52
Eaves
Beam
Main frame
Strut Connection
Streamline
Gutter
Eaves Beams
Purlin
Eaves
Beam
Vertical
Cladding
Main Frame
Stooling
Dimension
Boundary Wall
Strut Connection - External Gutter
Eaves Beam
First
Purlin
NS
NS
CL
100
100100
CL
NB2
NB1
NB3
NB3
Holes utilised for fixing NB2
cleat to Eaves Beam
Eaves
Beam
First Purlin
53
Roof cladding
Strut NS
Streamline
gutter
Vertical
cladding
54
Strut cleat
Ref NB1
Eaves Beam
Strut cleat
Ref NB3
145 Sections /
alternative
connection
Parapet
Parapet Detail
Boundary
wall gutter
Eaves Beams
Roof cladding
Multichannel
Parapet Post
Purlin
Main
frame
Eaves Beam
Stanchion
bracket
Roof cladding
Top flange of
Eaves Beam
with negative
slope angle
max -6O
Eaves
Beam
Vertical
cladding
Main frame
Stooling
dimension
55
85
17
35
Angle A =
-6 to +30
93
Dim A
38
All holes
18 Dia.
36
Dim C
Dim B
(Gauge)
19
60
93
Kg/M
Dims (mm)
B
Gauge
(mm)
E185/140
E215/170
E265/150
E265/200
5.00
5.67
6.37
8.51
185
215
265
265
92
122
172
172
38
68
118
118
1.63
1.73
1.73
2.45
56
For a
n acc
urate
and e
conom
ic
design
use
Toolk
it.
Stooling
Dim
145
175
205
235
265
Non-Standard
151
181
211
241
271
E185
E215
E 265
NC185/151B
NC185/181B
NC185/211B
NC185/241B
NC185/271B
NC185/dimB
NC215/151B
NC215/181B
NC215/211B
NC215/241B
NC215/271B
NC215/dimB
NC265/151B
NC265/181B
NC265/211B
NC265/241B
NC265/271B
NC265/dimB
Multibeam
Rail Size
Stooling
Dim
145
175
205
235
265
Non-Standard
151
181
211
241
271
E185
E215
E 265
NC185/151
NC185/181
NC185/211
NC185/241
NC185/271
NC185/dim
NC215/151
NC215/181
NC215/211
NC215/241
NC215/271
NC215/dim
NC265/151
NC265/181
NC265/211
NC265/241
NC265/271
NC265/dim
Eaves Beams
Note: All Fixing Brackets are supplied in unpainted black steel as standard.
Suffix
Bolt-on cleat
Bolt-on Painted
Bolt-on Galvanised
BB
BE
BG
Example
NC185/151BB
NC185/151BE
NC185/151BG
Eaves
Beam
Bracket
Eaves
Beam
Stanchion
Eaves
Beam
Bracket
Eaves
Beam
Stanchion
57
107
18
NB1
Cleat NB1 is for use where the roof cladding is
fixed through to the top flange of the eaves beam
and the gutter is an external cladding hung system.
29
Fixing face
100
145
Part Reference
80
40
45
R50
18
For design details see page 51. For construction details see pages 52-55.
50
34
Part Reference
DIM Y
47.50
55
60
R50
48
86
27
100
71
55
For design details see page 51. For construction details see pages 52-55.
40
25
40
28
NB3
22
For design details see page 51. For construction details see pages 52-55.
Dimension L *
70
Part Reference
2.4
Hole Dia.
14mm.
70
20
20
38
38
38
For design details see page 51. For construction details see pages 52-55.
Fixing Brackets
Dim Y
NC185
NC215
NC265
90
120
170
158
188
238
Stooling dimension
(bolt on cleat)*
Stooling dimension
(weld on cleat)*
150
25
Optional plate
for bolt on cleat
10
100
75
68
100
93
68
160
130
130
Dim Y
Dim X
Dim X
Dim Y
Dim X
Part Reference
2.4 19
30
30
40
70
150
100
25
61
20
58
150
100
28
60
80
20
86 30
14
20
18
50
18
28
18
Eaves Beams
Spans up to 12m are possible, subject to minimum volumes - for further details contact our Technical Department.
Table 2:5 Eaves Beam Section Properties
Section
Reference
Depth
mm
Gauge
mm
Weight
kg/m
Area
cm2
lxx
cm4
Zxx
cm3
lyy
cm4
Zyy
cm3
Rxx
cm
Ryy
cm
E185140
E215170
E265150
E265200
185
215
265
265
1.63
1.73
1.73
2.45
5.00
5.67
6.37
8.51
6.39
7.24
8.08
11.53
356.59
512.28
835.55
1191.52
37.34
47.2
62.7
89.18
58.32
66.04
72.5
103.39
9.31
10.22
10.71
15.2
7.47
8.41
10.17
10.17
3.02
3.02
3
3
E185140
E215170
E265150
E265200
Ult. Load Gauge 1.63 Ult. Load Gauge 1.73 Ult. Load Gauge 1.73 Ult. Load Gauge 2.45
kN
defl. Limit
kN
defl. Limit
kN
defl. Limit
kN
defl. Limit
31.822
27.276
23.866
21.215
19.093
17.357
14.79
34.655
25.461
19.494
15.402
12.476
10.311
8.664
30.135
26.786
24.108
21.916
19.655
18.544
17.22
16.072
15.067
14.181
13.103
11.739
28.005
22.127
17.923
14.812
12.447
10.605
9.144
7.966
7.001
6.202
5.532
4.965
37.528
33.358
30.022
27.293
25.018
23.094
21.444
20.015
18.764
17.66
16.679
15.801
45.677
39.09
29.233
24.16
20.301
17.298
14.915
12.992
11.419
10.115
9.023
8.098
39.31
36.502
34.068
31.939
30.06
27.306
24.521
24.667
21.269
18.528
16.284
14.425
12.866
11.548
Example
Span 6.0m, distance to first purlin 1.8m, distance to top side rail 1.8m,
Ultimate down (((dead+services) x 1.4) + (super x 1.6)) x 6.0 x 1.8/2 = +6.847 kN
Ultimate uplift ((dead x 1.0) - (wind uplift x 1.4)) x 6.0 x 1.8/2 = -6.156 kN
Ultimate uplift (((dead + super) x 1.2) - (wind uplift x 1.2)) x 6.0 x 1.8/2= -1.166 kN
Pressure on side = wind pressure x 1.4 x 6.0 x 1.8/2 = +6.048 kN
Suction on side = wind suction x 1.4 x 6.0 x 1.8/2 = -9.072 kN
simpl
ify yo
ur
Eaves
B
eam
design
- use
the
Toolk
it de
sign
softw
are.
59
30
25
20
15
10
5
0
0
20
30
3.0
3.5
6.0
5.5
5.0
4.5
10
4.0
E185140
35
Vertical load kN
30
25
Vertical load kN
20
15
10
5
0
4.5
15
5.0
10
5.5
6.0
35
30
Vertical load kN
25
20
15
10
5
0
10
4.5
5.5
15
5.0
6.0
60
20
E215170
20
18
16
12
10
8
Eaves Beams
Vertical load kN
14
6
4
2
0
10
6.5
7.0
20
7.5
15
8.0
9.5
9.0
8.5
E265150
25
Vertical load kN
20
15
10
0
15
9.5
9.0
8.5
8.0
7.5
7.0
10
20
6.5
45
40
35
25
20
15
10
5
0
20
25
30
6.5
15
7.0
10
7.5
8.0
9.5
9.0
8.5
Vertical load kN
30
61
EVOLVED
M
A
E
LTIB
U
M
Cladding Rails
Overview
64
Spanning Systems
65
66
Construction Details
72
78
Section Properties
86
Load Tables
87
Cladding Rails
Flange
65mm
M145
Flange
65mm
M175
Flange
65mm
M205
Flange
65mm
M235
Flange
65mm
M265
Flange
90mm
M300
Flange
90mm
M350
63
Applications
- All types of wall cladding
- Horizontal or vertically laid cladding
- Suitable for use with Multichannel
- Bay widths up to 15m
Material Specification
Hot dip galvanised steel to BS EN 10326:2004 and BS EN
10143:1993 specifications for continuously hot dip zinc/metal
coated structural steel strip.
The minimum grade of steel used is S450GD, with Z275 zinc
coating, giving an average coating thickness of 0.02mm to each
side. Other galvanised coatings may be available. Please contact
our Technical Department for advice.
Sustainability
The Multibeam system has been engineered to ensure maximum
performance whilst minimising the material content.
Individual sections are packed together using low carbon mild
steel, blued and waxed banding which is wholly recyclable.
Identification of the bundles is by paper labels which are
biodegradable and can be recycled.
Certification
Kingspan Structural Products has developed a fully integrated
management system which combines all the common elements of
ISO 9001 (Quality), ISO 14001 (Environment) and OHSAS
18001 (Occupational Health and Safety) into one system.
This simple coherent business management system enables the
organisation to successfully achieve its purpose and mission to
ensure that quality; safety and the environment are considered in
all aspects of the business process. Further information on these
certifications can be found on our website
www.kingspanstructural.co.uk.
Range
- Section heights from 145mm to 350mm
- Flange widths from 65mm to 90mm
- Gauges from 1.2mm to 2.7mm
For full product dimensions see page 78. Other sizes may be
available on specific request. Please contact our Technical
Department for advice.
Lengths
- All lengths are catered for; requirements in excess of 18m,
please contact our Sales Department.
64
EVOLVED
IBEAM
T
L
MU
Use d
ouble
sp
syste
m wh an
e
re
possi
ble
fewe
r com
ponen
quick
ts!
er to
erect!
Spanning Systems
Double Span
Double span lengths of
Multibeam section span across three frame
supports and provide design economy and speed of erection.
This spanning system always results in the lowest component
count. To ensure equal load distribution across the supporting
steel work the joints are staggered, typically requiring only one
sleeve per run of rails.
System Types
Cladding Rails
Double Span
Most popular system
Ideal for all bay centres up to and including
8.25m
Fewer components
Quicker erection and programme completion
10
11
10
11
Sleeve / Joint
65
Insulated Panels
Two layers of steel bonded to an insulation core, laid vertically
when through fixed directly to the side rails, will provide full
restraint. The vertical restraint systems shown on page 67 can
be used.
Where the insulated panel is only through fixed on one edge,
trapping an under tongue on the adjacent panel the restraint
shown on page 67 should be adopt but modified as follows;
These systems have the bottom tube strut replaced with an angle
strut and the diagonal wire replaced with a diagonal screwed rod.
Horizontally laid insulated panels should use the restraint systems
shown on pages 68 and 69 and the rail capacities can be
obtained from the Toolkit design software or from page 91 - 93.
Generally the Insulated panels when laid horizontally should be
fixed to the verticals between the rails and not by reducing the
horizontal rail cross centres to match the panel cover width.
66
Twin Skin
Is made up of a inner liner profile and outer weather skin with an
internal steel spacer system and thermal insulation. The liner tray is
attached directly to the Multibeam side rail using self drill self
tapping screws and this in connection with the restraint systems
shown on page 67 will provide sufficient restraint to support the
values shown in the load tables or design software.
Horizontally laid twin skin usually comprises of a vertically
spanning liner tray and internal spacer system with the outer sheet
laid horizontally and fixed back to the vertical internal spacer.
With this arrangement the inner liner is through fixed to the
Multibeam rail. When used with the restraint systems shown on
pages 68 and 69, provides the necessary restraint to support the
values shown in the load tables or Toolkit design software.
Firewall
Multibeam side rails can be used to support steel cladding based
firewalls using either Insulated panels or twin skin cladding.
As long as the Multibeam side wall system is sufficiently designed
to support the normal applied loads (dead weights and wind
loadings) it will also support the requirements when the same
cladded wall operates as a firewall see page 70.
Eaves Beam
Maker up
Max
height
x*
Tubular
struts
Multibeam
cladding rails
Diagonal
tie wire
Cladding Rails
Minimum
angle 30
The strut system should be fitted between the bottom rails and the
rails levelled before proceeding progressively upwards.
Where the cladding is clip fixed or fixed in such a way that the
cladding can slip, relative to the side rail face please contact our
Technical Department.
* When wall exceeds 10m in height allow one set of diagonal ties
for every 9.0m of height.
Eaves Beam
Maker
up
Tubular
struts
Max
height
x*
Multibeam
cladding rails
Diagonal
tie wire
Minimum
angle 30
67
Eaves Beam
G140/150
Stanchion
Cleat
(MS120x)
Connection Details
Eaves Beam
Section
Eaves Beam
Cleat (EBC1)
Eaves Beam
Strut Bracket (NC)
Multichannel
Vertical
Members
Angle Cleat
(MTC)
G140/150
Section
Multibracket
Connection
(MB1A)
Angle Cleat
(MTC)
Multibeam
Rail Section
G140/150
(Panel Joint Rail)
at Stanchions
Standard
Diagonal Tie
Wire (DB)
Multibeam Rail
Cleat (eg. MD205)
Multibeam
Rails
Multibracket
(MB1A)
G140 Stanchion
Cleat (MS120x)
Bottom Vertical
Section should
be same section
depth as the
Rail Section
68
Eaves beam
G140/150
Stanchion
Cleat
(MS120x)
Connection Details
Eaves Beam
Section
Eaves Beam
Strut Bracket (NC)
Eaves Beam
Cleat (EBC1)
Angle Cleat
(MTC)
Multibracket
Connection
(MB1A)
G140/150
Section
G140/150
(Panel Joint Rail)
at Stanchions
Multibeam
Rail Section
Rod Diagonal
(TRHD)
Multibeam Rail
Cleat (eg. MD205)
Multibeam Rails
Multibracket
(MB1A)
G140 Stanchion
Cleat (MS120x)
69
Cladding Rails
G140/150
(Panel Joint Rail)
Restraints - Firewall
Sheeting rails with a minimum thickness of 1.2mm and above may
be used for both twin skin cladding and composite panels, providing
they are structurally capable of supporting the wall between the
column spacings for the normal load case.
2000mm
max
centres
Standard rail
strut system
General Notes
1. Firewall rails should be 30mm shorter in length and should have
54mm x 14mm slotted holes to cater for expansion.
2. Although bottom rails must be single spanning to suit fire
conditions, standard sleeves may be introduced to provide
continuity for structural considerations.
54x14mm Slot
20mm
Column Centres
Single Span
*Edge distance
70
50mm
40mm
Column Centres
Column Centres
Double Span
Case Study
Arsenal Football Club Training Store, St. Albans
Cladding Rails
A new equipment store at Arsenal Football Clubs world class training centre has been completed in style
thanks to the specification of over 1,100 metres of Multibeam and nearly 600 metres of Multichannel from
Kingspan Structural Products.
71
50
Bolt-on Cleat
For product dimensions refer to page 78.
Sleeve
72
External Corner
Corner
stanchion
Gable rail
Corner stub
Double cleat
Cladding rail
Cladding Rails
Internal Corner
Multibeam Rails
Stanchion
Connection Plate
3.2mm Galvanised Steel
Multibeam
Rail
73
20
Multibeam
cladding rail
30
Plastic washer
under nut
Multibeam or
Multichannel can
be used in Firewall
application
Multibeam
Cleat
Plastic
washers
Adjustment
Cleat
MTC
Cleat G140/150
TRHD
Rod Diagonal
Stanchion
Adjustment
50
74
475
475
475
475
75
Cladding Rails
Cleat
Adjustment
110
Stanchion
Adjustable diagonal tie
wire for levelling purposes
76
Door Openings
Autoform or
Cleated Header
Rail Connection
Hot-rolled or Multichannel
Door Header Rail
Bolt-on Single
Rail Cleats
Multibeam Rails
Bolt-on Single
Rail Cleats
Hot Rolled or
Multichannel Door Posts
Inset Rail
Cleats (made
by others)
Hot-rolled or Multichannel
Door Post
Autoform or Cleated
Base Connection
When the door framework needs to be set to the same level as the cladding rails, the rail cleats will need to be made by others alternatively, Multichannel rails could be considered.
Window Openings
Multibeam Rail
Angle Cleat (MTC)
Autoform Connections
Multibeam Rail
Multichannel
Trimmers
Autoform
Connections
Multichannel
Trimmer
Multibracket Connection
(MB1A/B)
Multibracket Connection
(MB1A/B)
Multibeam Rail
77
Cladding Rails
Cleated or Autoform
Base Connection
Weight
Kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
145
145
145
145
145
145
145
145
175
175
175
175
175
175
175
175
175
205
205
205
205
205
205
205
205
205
205
205
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
Dims (mm)
B
C
Gauge
(mm)
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
8
8
8
8
8
8
8
8
38
38
38
38
38
38
38
38
38
68
68
68
68
68
68
68
68
68
68
68
References
Weight
Kg/m
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
235
235
235
235
235
235
235
235
235
235
265
265
265
265
265
265
265
265
300
300
300
300
300
300
350
350
350
350
350
350
Dims (mm)
B
C
Gauge
(mm)
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
90
90
90
90
90
90
90
90
90
90
90
90
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
40
40
40
40
40
40
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
98
98
98
98
98
98
98
98
98
98
128
128
128
128
128
128
128
128
94
94
94
94
94
94
144
144
144
144
144
144
Reference Key
M
Multibeam
Section
145
065
Section Flange
Depth
120
1.2mm gauge
Lip dimension nominal
15mm
Dim C
Dim B
Dim D
30
32
20
Dim A
All dimensions in millimetres.
78
M145
Gauges
M175
Gauges
M205
Gauges
M235
Gauges
M265
Gauges
M300
Gauges
M350
Gauges
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
-
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
2.5
-
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.4
1.5
1.6
1.8
2.0
2.2
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
Multicleats
Table 3:2 Multicleat References
Cleat Type
Sheeting Line
(mm)
Weld-On
Bolt-On
Multibeam Section
Depths (mm)
Double
Single
Double
Single
G140/150
145
up to 175
up to 205
up to 235
up to 265
300
350
MD 145
MD 175
MD 205
MD 235
MD 265
MD 300
MD 350
MS 120x
MS 145
MS 175
MS 205
MS 235
MS 265
MS 300
MS 350
MD 145BB
MD 175BB
MD 205BB
MD 235BB
MD 265BB
MD 300BB
MD 350BB
MS 120Bx
MS 145BB
MS 175BB
MS 205BB
MS 235BB
MS 265BB
MS 300BB
MS 350BB
151
181
211
241
271
306
356
*All Cleats are supplied in unpainted black steel as standard. Painted or galvanised finishes are available at extra cost if required.
Please note, for galvanised finish there is an extended lead time, please contact our Sales Department for more information.
Bolt-on Black
Bolt-on Painted
Bolt-on Galvanised
BB
BE
BG
Stiffened
Extended
S
X
Example
MD175BB
MD175BE
MD175BG
MD 350
MD265BS
MD265X300
(ie; 300mm from
rafter face)
MD 300
Single
17
105
Double
30 30 30 30 26
17
105
30 30 30 30 26
150
17
MD 265
105
14mm
diameter
fixing holes
30
MD 235
30
MD 205
26
100
35
35
MD 175
MS 120x
cleats
Multi
ost
the m
e
d
i
v
pro
mical
econo
r
ion fo
solut
ils.
off ra
d
e
l
stoo
MD 145
79
Cladding Rails
Options
Bolt-On
Single Cleat
Bolt-On
Double Cleat
G140/150
145
175
205
235
265
300
350
6
6
6
8
8
8
8
8
Cleat
Dim H (mm)
50
60
70 (standard)
80
90
100
55
55
50
50
50
50
Base Plate
See table 1.9 for thickness
100
100
Optional plate
for bolt-on cleat
Cross
Centres*
low
ats al
e
l
c
i
t
Mul
ction
ing se
differ
used
to be
sizes
ion,
t
a
elev
y
n
a
on
aining
maint
e
l
i
h
w
tant
a cons
e.
ng lin
sheeti
80
35
Stiffener plate
70
Multicleat Arrangement
Diagram A
shows a 265 deep section fixed to a MD265 cleat.
450 Max
Stiffener plate
200
Diagram B
shows a 205 deep section fixed to a MD265 cleat.
81
Cladding Rails
200
100
325
Symmetrical about
CL
50
Varies
with
Purlin
Depth
500
12
69/94
For design details see page 65. For construction details see page 72.
Table 3:6
Multibeam Sleeve Product References
Sleeve
Part Reference
Multibeam
Part Reference
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
Nominal Sleeve
Gauge (mm)
1.6
S145065A
S145065B
2.0
3.0
S145065C
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
1.6
S175065A
S175065B
2.0
S175065C
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
3.0
S205065A
1.6
S205065B
2.0
S205065C
3.0
Multibeam
Sleeve
145
065
Section
Depth
Flange
A/B/C
Sleeve Gauge
A=1.6mm
B=2.0mm
C=3.0mm
Multibeam
Part Reference
Sleeve
Part Reference
Nominal Sleeve
Gauge (mm)
S235065A
1.6
S235065B
2.0
S235065C
3.0
S265065A
1.6
S265065B
2.0
S265065C
3.0
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M300090150
M300090160
M300090180
M300090200
M300090250
M300090270
M350090150
M350090160
M350090180
M350090200
M350090250
M350090270
S300090A
1.6
S300090B
2.0
S300090C
3.0
S350090A
1.6
S350090B
2.0
S350090C
3.0
EVOLVED
IBEAM
T
L
MU
82
a
Maximum length 2.5m
a
a
30
Part Reference
TSA0000
where 0000 = Rail Centres
eg; TSA1000 (Rail Centres = 1000mm)
35
30
M12 Thread
For design details see page 67. For construction details see page 76.
Part Reference
35
30
TSB0000
where 0000 = Rail Centres
eg; TSB1000 (Rail Centres = 1000mm)
Tubular Ties
20
35
30
TS14000
where 0000 = Rail Centres
eg; TS141000 (Rail Centres = 1000mm)
30
Cladding Rails
For design details see page 67. For construction details see page 76.
For design details see page 67. For construction details see page 76.
Clamp Plates
CA145
CA
20
40x50x3mm plate
30
CA 145
CA
83
a
aa
2.4
Maximum length 2m
25
a
a
a
25
RNA0000
where 0000 = Length between
Hole Centres
eg; RNA1000 (Hole Centres = 1000mm)
38
Mainframe Hole
18 dia.
Purlin Hole
14 dia.
38
2.0
RNB0000
where 0000 = Length between
Hole Centres
eg; RNB1000 (Hole Centres = 1000mm)
DB
DA
Please state your dimension X and Y
Maximum length 2m
25
25
45
Mainframe Hole
18 dia.
Purlin Hole
14 dia.
45
DB
Single
DA
Double
Dim Y
state your dimension X and Y
For design details see pages 67-69. For construction details see page 77.
20
G140/150
Maximum length = 8 metres
1.5mm galvanised steel.
If using
single cleats,
increase
Dim Y by
50mm
Dim X
rail crs
Part Reference
30
120
20
30
55
20
140
For use within the span it can be provided complete with end connections attached
For design details see pages 68-69. For construction details see page 74.
Rail Stubs
Part Reference
SM0000
where 0000 = required length Dim L
Manufactured from 2.7mm
galvanised steel strip.
All holes 14 diameter.
84
25
100
100
20
78
43
23
70
25
Dim L
aa
a
a
50
Rod Diagonal
Varies
50
TRHD0000
where 0000 = length between hole centres
130
For design details see page 69. For construction details see page 74.
CSC145
CSC175
CSC205
CSC235
100
Dim A
20
20
45
Dimension X to be specified
All holes 14 diameter
Cladding Rails
116
13
45
20
Multibracket
30
30
28
18
38
130
43
65
18
18
20
40
18
130
For design details see pages 68-69. For construction details see page 74.
Note: Multibrackets are not suitable for connecting sections to a 90mm flange.
MTC Cleats
Rail Depth
MTC145
MTC175
MTC205
MTC235
MTC265
MTC300
MTC350
145mm
175mm
205mm
235mm
265mm
300mm
350mm
TO SUIT RAIL
40
40
20
60
18
80
18
NON-HANDED
85
Thickness
cm2
Area
kg/m
Weight
cm4
Ixx
cm3
Gross Zxx
cm4
Iyy
cm3
Zyy
cm
Rxx
cm
Ryy
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
3.68
3.99
4.30
4.60
4.91
5.51
6.11
6.71
4.03
4.37
4.71
5.04
5.38
6.04
6.70
7.36
8.33
4.38
4.75
5.11
5.48
5.84
6.21
6.57
7.29
8.00
9.06
9.76
5.12
5.52
5.92
6.31
6.70
7.10
7.88
8.65
9.80
10.56
5.93
6.36
6.78
7.63
8.47
9.30
10.54
11.36
7.75
8.27
9.31
10.34
12.89
13.91
8.48
9.05
10.19
11.32
14.12
15.24
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.86
6.27
7.05
7.86
9.82
10.64
6.43
6.87
7.72
8.62
10.77
11.66
121.15
131.11
140.99
150.77
160.48
179.69
198.62
217.21
187.92
203.42
218.82
234.07
249.21
279.21
308.79
337.89
380.74
272.82
295.39
317.82
340.05
362.13
384.50
405.91
449.12
491.68
554.41
595.41
408.72
439.84
470.70
501.35
531.67
562.18
622.25
681.48
768.88
826.07
586.70
627.97
668.97
750.38
830.83
910.21
1027.46
1104.27
1017.30
1084.30
1217.51
1349.43
1673.13
1800.32
1470.17
1567.25
1760.37
1951.76
2422.01
2607.02
16.72
18.09
19.45
20.80
22.14
24.79
27.40
29.97
21.48
23.25
25.01
26.76
28.49
31.92
35.30
38.62
43.52
26.62
28.83
31.01
33.18
35.34
37.52
39.61
43.82
47.98
54.10
58.10
34.79
37.44
40.07
42.68
45.26
47.85
52.97
58.01
65.45
70.32
44.29
47.40
50.50
56.64
62.71
68.71
77.56
83.36
67.83
72.30
81.18
89.97
111.56
120.04
84.02
89.57
100.61
111.54
138.42
148.99
19.24
20.74
22.21
23.66
25.08
27.86
30.54
33.12
19.28
20.79
22.26
23.71
25.13
27.91
30.60
33.18
36.89
19.32
20.83
22.30
23.75
25.18
26.63
27.96
30.64
33.23
36.94
39.29
20.86
22.34
23.79
25.21
26.59
28.00
30.69
33.27
36.98
39.33
22.37
23.82
25.25
28.04
30.72
33.31
37.01
39.36
54.24
57.60
64.22
70.67
86.07
91.94
54.45
57.83
64.50
70.99
86.50
92.42
4.56
4.91
5.26
5.60
5.94
6.60
7.23
7.84
4.53
4.89
5.23
5.57
5.91
6.56
7.19
7.80
8.68
4.51
4.86
5.21
5.55
5.88
6.22
6.54
7.17
7.77
8.64
9.20
4.85
5.19
5.53
5.86
6.18
6.51
7.14
7.75
8.62
9.17
5.17
5.51
5.84
6.49
7.12
7.72
8.59
9.14
9.60
10.20
11.37
12.52
15.27
16.32
9.72
10.33
11.52
12.69
15.49
16.57
5.74
5.73
5.73
5.72
5.72
5.71
5.70
5.69
6.83
6.82
6.82
6.81
6.81
6.80
6.79
6.78
6.76
7.89
7.89
7.88
7.88
7.87
7.87
7.86
7.85
7.84
7.82
7.81
8.93
8.92
8.92
8.91
8.91
8.90
8.89
8.88
8.86
8.84
9.95
9.94
9.93
9.92
9.91
9.89
9.87
9.86
11.45
11.45
11.44
11.42
11.39
11.38
13.16
13.16
13.14
13.13
13.09
13.08
2.29
2.28
2.27
2.27
2.26
2.25
2.24
2.22
2.19
2.18
2.17
2.17
2.16
2.15
2.14
2.12
2.10
2.10
2.09
2.09
2.08
2.08
2.07
2.06
2.05
2.04
2.02
2.01
2.02
2.01
2.01
2.00
1.99
1.99
1.97
1.96
1.94
1.93
1.94
1.94
1.93
1.92
1.91
1.89
1.87
1.86
2.64
2.64
2.63
2.61
2.58
2.57
2.53
2.53
2.52
2.50
2.47
2.46
86
Thickness
mm
Area
cm2
Weight
kg/m
lxx
cm4
Zxx
Pos cm3
Zxx
Neg cm3
lyy
cm4
Zyy
cm3
Rxx
cm
Ryy
cm
1.50
5.10
4.00
78.08
22.67
9.13
164.43
28.81
3.91
5.63
Siderail
Section
4.5
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
5.0
Weight
kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
9.33
11.23
12.96
14.72
16.49
19.97
23.28
26.42
11.73
13.83
15.99
17.96
19.61
23.34
27.25
31.00
36.34
13.02
14.98
17.40
19.89
22.40
24.55
26.47
30.69
35.08
41.37
45.42
17.58
20.35
23.35
26.73
28.82
31.47
36.54
44.28
52.41
57.66
8.75
10.26
11.82
13.41
15.00
18.13
21.12
23.94
10.79
12.68
14.63
16.40
20.04
22.44
24.80
27.12
14.26
15.25
16.23
18.17
20.09
21.97
-
Span
(m)
5.5
Siderail
Section
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
Weight
kg/m
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
17.89
21.66
24.76
28.13
32.94
12.15
14.32
16.55
18.81
21.08
23.02
24.74
28.52
32.48
38.13
41.76
16.94
19.62
22.34
25.00
27.27
29.65
34.20
41.25
48.54
53.26
8.06
9.44
10.86
12.30
13.75
16.60
19.32
21.89
9.97
11.70
13.47
15.09
16.44
19.87
22.69
25.75
30.12
11.28
13.25
15.29
17.35
19.41
21.17
34.17
38.51
10.96
11.78
12.60
13.41
15.02
16.60
18.16
23.34
25.81
28.24
31.82
-
Cladding Rails
Span
(m)
87
Span
(m)
6.0
88
Siderail
Section
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
Weight
kg/m
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
22.73
26.17
29.77
34.90
38.20
15.73
18.18
20.66
23.08
25.14
27.44
31.43
37.86
44.48
48.77
20.49
23.32
24.86
29.51
35.06
41.61
49.32
54.32
7.47
8.73
10.04
11.37
12.70
15.31
17.80
20.15
9.27
10.85
12.48
13.97
15.20
18.35
20.93
23.74
27.74
10.52
12.33
14.20
16.09
17.99
19.59
21.02
24.17
27.47
32.17
35.20
14.67
16.92
19.20
21.42
23.30
25.42
29.07
34.97
41.04
8.51
9.21
9.90
10.59
11.27
12.62
13.95
15.26
15.37
16.44
17.50
19.61
21.69
23.73
26.74
38.94
41.82
-
Span
(m)
6.5
Siderail
Section
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
Weight
kg/m
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
44.97
19.12
22.29
23.74
28.00
33.11
39.15
46.22
50.80
8.66
10.12
11.63
13.00
14.13
17.04
19.43
22.02
25.71
9.84
11.52
13.25
14.99
16.75
18.23
19.55
22.46
25.50
29.84
32.63
13.74
15.82
17.93
19.98
21.71
23.67
27.04
32.50
38.10
41.72
17.91
20.85
22.65
26.59
31.32
36.72
43.12
47.27
12.17
13.10
14.01
14.91
16.71
18.48
20.22
22.78
23.01
24.29
26.88
29.42
33.18
35.63
49.43
-
Siderail
Section
7.0
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
7.5
Weight
kg/m
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
10.15
11.85
13.60
15.19
16.51
19.88
22.65
25.66
29.94
11.56
13.51
15.52
17.55
19.59
21.62
22.84
26.21
29.74
34.78
38.02
16.15
18.56
21.01
23.11
25.41
27.67
31.60
35.97
42.13
46.11
21.07
24.74
26.68
32.34
37.34
42.20
51.07
55.95
9.47
11.06
12.69
14.18
15.41
18.56
21.14
23.94
27.95
10.90
12.72
14.60
16.49
18.40
20.30
21.43
24.58
27.87
32.58
35.60
15.23
17.48
8.12
9.48
10.88
12.15
13.21
15.91
18.12
20.53
23.95
9.25
10.81
12.41
14.04
15.67
17.05
18.27
20.97
23.79
27.82
30.41
12.92
14.85
16.81
18.71
20.32
22.14
25.27
30.34
35.54
38.90
16.84
19.58
21.32
25.27
29.69
34.31
40.26
44.11
7.64
8.91
10.22
11.41
12.39
14.91
16.98
19.22
22.42
8.72
10.18
11.68
13.20
14.72
16.00
17.14
19.66
22.30
26.06
28.47
12.18
13.99
9.70
10.50
11.29
12.08
12.86
14.41
15.93
17.44
19.65
17.55
18.69
19.84
20.94
23.17
25.37
28.61
30.72
35.16
39.67
42.62
8.45
9.14
9.84
10.52
11.20
12.55
13.88
15.19
17.11
14.29
15.29
16.28
17.28
18.25
20.19
22.10
24.92
26.76
-
Span
(m)
8.0
Siderail
Section
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
Weight
kg/m
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
15.82
17.60
19.10
20.79
23.71
28.46
33.31
36.44
15.88
18.45
20.07
24.06
27.88
32.20
37.75
41.34
8.25
9.61
11.02
12.45
13.88
15.08
16.15
18.51
20.98
24.50
26.77
11.52
13.22
14.93
16.60
18.01
19.60
22.33
26.79
31.33
34.27
15.03
17.44
18.96
22.95
26.28
30.33
35.53
38.90
25.27
27.97
30.63
34.56
37.13
46.18
49.64
11.67
12.56
13.43
14.31
15.19
16.04
17.74
19.42
21.90
23.52
18.60
19.81
21.00
22.21
24.58
26.92
30.38
32.63
32.82
35.96
40.59
43.62
Cladding Rails
Span
(m)
89
Span
(m)
Siderail
Section
8.5
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
9.0
90
Weight
kg/m
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
7.82
9.11
10.43
11.78
13.12
14.26
15.26
17.48
19.81
23.12
25.26
10.93
12.53
14.14
15.72
17.04
18.54
21.11
25.31
29.58
32.35
14.26
16.53
17.96
21.89
24.85
28.66
33.56
36.73
7.44
8.65
9.91
11.18
12.45
13.52
14.47
16.56
18.76
21.89
23.90
10.39
11.90
13.43
14.92
16.17
17.58
20.01
23.98
28.02
30.63
13.56
15.71
17.06
20.78
23.57
27.17
31.79
34.78
9.55
10.34
11.12
11.90
12.67
13.46
14.21
15.72
17.21
19.40
20.84
15.39
16.47
17.54
18.61
19.67
21.78
23.85
26.91
28.91
26.26
29.07
31.85
35.96
38.64
8.52
9.22
9.92
10.61
11.30
12.00
12.67
14.02
15.35
17.31
18.59
12.76
13.73
14.69
15.65
16.60
17.55
19.42
21.27
24.00
25.79
19.60
20.88
23.42
25.93
28.41
32.07
34.47
Span
(m)
Siderail
Section
9.5
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
10.0
Weight
kg/m
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
9.91
11.34
12.79
14.20
15.38
16.72
19.02
22.78
26.61
29.08
12.93
14.97
16.24
19.77
22.41
25.83
30.20
33.04
9.46
10.82
12.20
13.54
14.66
15.94
18.12
21.70
25.33
27.68
12.35
14.29
15.50
18.85
21.36
24.61
28.77
31.46
11.45
12.32
13.19
14.05
14.90
15.75
17.43
19.09
21.54
23.14
17.59
18.74
21.02
23.28
25.50
28.78
30.94
10.33
11.12
11.90
12.68
13.44
14.21
15.73
17.23
19.44
20.89
14.83
15.88
16.91
18.97
21.01
23.01
25.98
27.92
Ultimate
Pressure
Kn
23.44
19.66
16.73
14.33
Ultimate
Suction
Kn
9.21
7.72
6.58
6.68
Deflection
L/150
Kn
9.10
6.69
5.12
4.05
Restraints at mid-span
4.5
Restraints at mid-span
5.0
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
14.96
17.16
19.36
21.54
23.70
27.96
32.12
36.20
16.18
18.94
21.74
24.57
27.39
32.99
38.49
43.86
51.73
13.79
15.75
17.70
19.63
21.55
25.31
28.89
32.03
15.08
17.58
20.09
22.62
25.12
30.09
34.96
39.59
45.52
12.77
14.54
16.29
18.02
19.74
22.67
25.46
28.19
14.12
16.39
18.66
20.94
23.19
27.64
31.26
34.75
39.86
14.76
17.45
20.21
23.01
25.83
28.66
31.44
36.81
41.17
47.50
51.44
14.96
17.16
19.36
21.54
23.70
27.96
32.12
36.20
16.18
18.94
21.74
24.57
27.39
32.99
38.49
43.86
51.73
13.79
15.75
17.70
19.63
21.55
25.31
28.89
32.03
15.08
17.58
20.09
22.62
25.12
30.09
34.96
39.59
45.52
12.77
14.54
16.29
18.02
19.74
22.67
25.46
28.19
14.12
16.39
18.66
20.94
23.19
27.64
31.26
34.75
39.86
14.76
17.45
20.21
23.01
25.83
28.66
31.44
36.81
41.17
47.50
51.44
22.21
24.03
25.84
27.64
29.42
32.94
36.41
39.81
34.45
37.29
40.11
42.90
45.68
51.18
56.60
61.93
69.79
17.55
18.99
20.42
21.84
23.24
26.02
28.77
31.46
27.22
29.46
31.69
33.90
36.09
40.44
44.72
48.94
55.14
14.21
15.38
16.54
17.69
18.83
21.08
23.30
25.48
22.05
23.86
25.67
27.46
29.24
32.76
36.23
39.64
44.67
32.01
34.65
37.28
39.89
42.48
45.11
47.62
52.69
57.68
65.04
69.85
Siderail
Section
5.5
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
6.0
Weight
kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
11.89
13.49
14.94
16.23
17.48
19.97
22.35
24.61
13.27
15.33
17.41
19.47
21.11
24.29
27.38
30.22
34.38
13.99
16.48
19.01
21.57
24.13
26.44
28.36
32.18
35.72
40.78
44.03
12.50
14.24
15.68
17.10
18.48
21.03
23.51
25.92
29.45
13.28
15.60
17.91
19.66
21.38
23.02
24.53
27.53
30.45
34.69
37.43
16.17
18.90
21.69
23.92
25.91
27.76
31.34
34.78
39.76
42.96
11.75
12.71
13.67
14.62
15.56
17.42
19.26
21.06
18.22
19.72
21.22
22.69
24.16
27.07
29.94
32.76
36.91
26.45
28.64
30.81
32.97
35.11
37.28
39.35
43.54
47.67
53.75
57.73
15.31
16.57
17.83
19.07
20.30
22.75
25.16
27.53
31.02
22.23
24.06
25.89
27.70
29.50
31.32
33.07
36.59
40.06
45.17
48.51
33.30
35.83
38.35
40.84
43.31
45.80
50.69
55.52
62.64
67.30
Cladding Rails
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M145065120
M145065130
M145065140
M145065150
M145065160
M145065180
M145065200
M145065220
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
Span
(m)
Restraints at mid-span
4.0
Weight
kg/m
Restraints at mid-span
Siderail
Section
Restraints at mid-span
Span
(m)
91
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
Restraints at mid-span
6.5
92
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
10.33
11.89
17.06
18.96
20.83
24.49
27.52
30.37
34.56
10.88
12.82
14.77
16.71
18.62
20.53
28.45
33.00
36.62
41.77
45.13
13.13
15.43
17.77
20.11
22.45
24.77
29.32
33.73
49.10
53.11
11.24
12.47
13.60
14.72
15.81
17.96
20.05
22.09
25.10
12.63
14.18
15.60
16.95
18.28
19.62
20.86
23.36
25.81
29.37
31.69
15.45
17.34
18.96
20.53
22.06
23.58
26.53
29.37
33.51
36.19
10.33
11.89
17.06
18.96
20.83
24.49
27.52
30.37
34.56
10.88
12.82
14.77
16.71
18.62
20.53
28.45
33.00
36.62
41.77
45.13
13.13
15.43
17.77
20.11
22.45
24.77
29.32
33.73
49.10
53.11
11.24
12.47
13.60
14.72
15.81
17.96
20.05
22.09
25.10
12.63
14.18
15.60
16.95
18.28
19.62
20.86
23.36
25.81
29.37
31.69
15.45
17.34
18.96
20.53
22.06
23.58
26.53
29.37
33.51
36.19
14.08
15.24
16.40
17.54
18.67
20.92
23.14
25.32
28.53
20.44
22.13
23.81
25.48
27.13
28.81
30.41
33.65
36.84
41.54
44.61
30.62
32.96
35.27
37.56
39.84
42.12
46.62
51.06
57.61
61.89
13.04
14.12
15.19
16.25
17.30
19.38
21.43
23.45
26.43
18.94
20.51
22.06
23.60
25.14
26.69
28.18
31.18
34.13
38.48
41.33
28.37
30.53
32.67
34.80
36.90
39.02
43.19
47.30
53.37
57.34
Span
(m)
Siderail
Section
6.5
M175065120
M175065130
M175065140
M175065150
M175065160
M175065180
M175065200
M175065220
M175065250
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
6.0
Weight
kg/m
7.0
Siderail
Section
Span
(m)
Weight
kg/m
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
9.73
11.15
15.98
17.73
19.44
22.15
24.75
27.29
31.04
10.36
12.15
13.93
15.70
17.45
19.19
26.51
29.67
32.79
37.38
40.36
12.57
14.70
16.85
19.00
21.14
23.26
34.61
38.32
43.76
47.31
9.87
11.52
13.17
14.80
20.84
22.30
23.70
26.52
29.30
33.38
35.96
12.03
14.01
16.00
17.98
19.95
27.47
30.81
34.09
38.92
42.03
12.00
12.99
13.97
14.94
15.91
17.83
19.71
21.57
24.31
17.42
18.86
20.29
21.71
23.12
24.55
25.92
28.67
31.39
35.39
38.01
26.09
28.08
30.05
32.01
33.94
35.89
39.73
43.51
49.09
52.74
15.02
16.26
17.50
18.72
19.93
21.17
22.34
24.72
27.07
30.52
32.78
22.50
24.21
25.91
27.60
29.27
30.95
34.25
37.52
42.33
45.47
8.0
8.0
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.55
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.55
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.82
4.16
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.55
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.82
4.16
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
9.42
10.95
12.47
17.30
18.59
19.90
21.14
23.66
26.13
29.58
31.81
9.72
11.53
13.37
15.22
21.40
22.89
24.40
27.37
30.28
34.38
36.98
9.35
11.06
12.78
17.65
18.99
20.32
21.66
24.28
26.69
30.20
32.47
9.34
11.25
13.22
15.23
21.34
24.40
27.43
30.25
34.26
36.86
8.39
9.90
11.44
12.97
14.50
16.01
22.19
24.97
27.72
31.73
34.16
8.39
10.09
11.85
13.65
15.45
19.07
28.33
31.53
36.22
39.13
9.42
10.95
12.47
17.30
18.59
19.90
21.14
23.66
26.13
29.58
31.81
9.72
11.53
13.37
15.22
21.40
22.89
24.40
27.37
30.28
34.38
36.98
9.35
11.06
12.78
17.65
18.99
20.32
21.66
24.28
26.69
30.20
32.47
9.34
11.25
13.22
15.23
21.34
24.40
27.43
30.25
34.26
36.86
8.39
9.90
11.44
12.97
14.50
16.01
22.19
24.97
27.72
31.73
34.16
8.39
10.09
11.85
13.65
15.45
19.07
28.33
31.53
36.22
39.13
13.08
14.17
15.24
16.31
17.37
18.44
19.47
21.54
23.58
26.59
28.55
18.10
19.60
21.09
22.57
24.04
25.50
26.96
29.84
32.68
36.87
39.61
15.91
17.23
18.54
19.84
21.13
22.41
23.69
26.23
28.72
32.41
34.82
21.21
22.98
24.73
26.47
28.19
31.63
35.02
38.36
43.30
46.54
13.67
14.80
15.92
17.04
18.15
19.25
20.35
22.53
24.67
27.83
29.91
18.22
19.73
21.24
22.73
24.22
27.17
30.08
32.95
37.20
39.98
Siderail
Section
9.0
M235065120
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065120
M265065130
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
9.0
Weight
kg/m
3.55
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
3.82
4.16
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
10.70
11.79
12.88
13.96
14.93
15.89
16.86
18.75
20.58
23.28
25.04
8.78
13.10
14.35
15.59
16.78
18.97
21.11
23.20
26.25
28.22
9.52
10.97
12.41
13.84
18.91
20.21
22.74
25.25
28.63
30.81
11.43
13.12
14.82
22.80
25.74
28.64
32.66
35.16
12.57
13.61
14.65
15.68
16.70
17.71
18.72
20.72
22.70
25.61
27.51
16.76
18.15
19.54
20.91
22.28
24.99
27.67
30.31
34.22
36.77
13.20
14.20
15.20
16.19
17.17
18.15
20.09
22.01
24.83
26.68
18.95
20.28
21.60
24.23
26.83
29.39
33.18
35.66
Cladding Rails
M205065120
M205065130
M205065140
M205065150
M205065160
M205065170
M205065180
M205065200
M205065220
M205065250
M205065270
M235065120
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M235065120
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065120
M265065130
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
M235065120
M235065130
M235065140
M235065150
M235065160
M235065170
M235065180
M235065200
M235065220
M235065250
M235065270
M265065120
M265065130
M265065140
M265065150
M265065160
M265065180
M265065200
M265065220
M265065250
M265065270
Span
(m)
7.5
Weight
kg/m
Siderail
Section
Span
(m)
93
D!!
D
O
DIIFFIIEED
O
M
M
L
E
L
E
N
N
N
AN
HA
CCH
I
I
T
T
L
L
U
M
MU
Multichannel
Overview
96
Why Multichannel?
97
Multichannel Restraints
98
104
114
Section Properties
122
Load Tables
123
Multichannel
Construction Details
L350/90
L300/90
L265/70
L235/70
L205/70
L175/70
L145/70
95
Multichannel - Overview
Multichannel
Applications
- Horizontally laid cladding rails
- Parapet posts
- Mezzanine floors
- Brickwork restraints
- Door and window trimmers, ribbon windows
- Wind bracing
- Columns
- Gable ends
- General engineering applications
Material Specification
Hot dip galvanised steel to BS EN 10326:2004 and BS EN
10143:1993 specifications for continuously hot dip zinc/metal
coated structural steel strip.
The minimum grade of steel used is S450GD, with Z275 zinc
coating, giving an average coating thickness of 0.02mm to each
side. Other galvanised coatings may be available. Please contact
our Technical Department for advice.
Sustainability
Recycling
Steel is one of the worlds most recycled materials
with over 40% of new steel made from recycled
steel. Kingspans suppliers encourage, promote
and assist in the return of steel for recycling.
Certification
Kingspan Structural Products has developed a fully integrated
management system which combines all the common elements of
ISO 9001 (Quality), ISO 14001 (Environment) and OHSAS
18001 (Occupational Health and Safety) into one system.
This simple coherent business management system enables the
organisation to successfully achieve its purpose and mission to
ensure that quality; safety and the environment are considered in
all aspects of the business process. Further information on these
certifications can be found on our website
www.kingspanstructural.com.
Range
- Section heights from 145mm to 350mm
- Flange widths from 70mm to 90mm
- Gauges from 1.2mm to 2.7mm
For full product dimensions see page 114. Other sizes may be
available on specific request. Please contact our Technical
Lengths
96
D!!
DIIFFIIEED
OD
MO
NEELL M
N
NN
A
A
H
H
C
C
I
I
ULLTT
M
MU
Why Multichannel?
Multichannel sections offer lightweight robust construction and
may be used in lieu of some hot rolled sections, offering easier site
handling. Multichannel is suitable for a wide range of structural
applications including horizontal cladding support, door and
window trimmers, wind bracing, mezzanine floor beams, brickwork
restraints, gable rafters and columns.
Autoform In
Autoform Ends
The unique feature of the Multichannel system is the Autoform
End. Autoform eliminates the need for fixing cleats and brackets
which simplifies the construction process by providing numerous
connection solutions to speed fabrication and on-site construction.
Autoforms are available with the returns turned inward or
outward and can be punched or counterformed with standard
hole options as required.
Autoform Out
Using this system, connections are primarily made using two bolts
which halves the connection time in fabrication and also reduces
fixing material costs.
Notches
Multichannel can be supplied with plain ends, notched ends
(top, bottom or both) and/or with Autoform Ends offering
installation flexibility.
Counterform Holes
In order to provide a flush connection for door and window
applications an off-line process of counterforming is used.
This enables countersunk bolts to be used without compromising
the finish of the Multichannel Rail.
Multichannel
Counterform
Dimensions
30 Dia
7.5
CL
Counterform
IN shown
Autof
orm E
n
remov
e the ds
need
for cl
eat
reduce s and
s
amoun the
t of
compo
n
ents
require
d on
site.
97
Eaves Beam
Maker up
Max
height
x*
Tubular
struts
Multichannel
cladding rails
Diagonal
tie wire
Minimum
angle 30
The strut system should be fitted between the bottom rails and the
rails levelled before proceeding progressively upwards.
Where the cladding is clip fixed or fixed in such a way that the
cladding can slip, relative to the side rail face please contact our
Technical Department.
* When wall exceeds 10m in height allow one set of diagonal ties
for every 9.0m of height.
Eaves Beam
Maker
up
Tubular
struts
Max
height
x*
Multichannel
cladding rails
Maximum rail cross centres are 2m. For larger cross centres,
contact Kingspan technical.
Where the weight of the cladding is greater than 0.12 kN/m 2
please contact our Technical Department.
98
Diagonal
tie wire
Minimum
angle 30
Restraints - Firewall
This assembly of Multichannel side rails is designed to offer lateral
support to the cladding assembly, which provides the firewall
performance of insulation integrity and stability for the periods
derived from test or assessment. Periods up to 240 minutes are
possible.
Firewall systems rely on the performance of the cladding. As the
sheeting rails are relatively thin components they have very little
heat sink capacity owing to their low mass. When subjected to a
fire resistance test, the sheeting rails are heated very quickly and
consequently lose their structural strength.
Sheeting rails whether exposed or concealed do retain sufficient
strength to prevent the wall from significant lateral movement even
after 240 minutes of exposure to a standard fire resistance test.
2000mm
max
centres
Standard rail
strut system
General Notes
1. Firewall rails should be 30mm shorter in length and should
have 54mm x 14mm slotted holes to cater for expansion.
2. Although bottom rails must be single spanning to suit fire
conditions, standard sleeves may be introduced to provide
continuity for structural considerations.
Multichannel
54x14mm Slot
20mm
50mm
40mm
Column Centres
Single Span
Column Centres
Column Centres
Double Span
*Edge distance
99
Connection Details
Eaves Beam
Section
Eaves Beam
Strut Bracket (NC)
Eaves beam
G140/150
Stanchion
Cleat
(MS120x)
Eaves Beam
Cleat (EBC1)
Autoform
Connections used
for all ChannelChannel
connections
Multichannel
Rail Section
G140/150
Section
Multichannel
Vertical
Members
Rails can be
inverted thus if
required for
windows etc.
Rail Cleat
(eg. MD205)
Multichannel
Autoform
Connection
Vertical
Multichannel
Section
G140/150
(Panel Joint Rail)
at Stanchions
Standard
Diagonal Tie
Wire (DB)
G140 Stanchion
Cleat (MS120x)
Bottom Vertical
Section should
be same section
depth as the
Rail Section
Multichannel
Rails
Alternative detail:
Bottom rail may be
inverted to enable the
use of 145 vertical
sections throughout
the sidewall
100
20 max
Connection Details
Eaves Beam
Section
Eaves Beam
Strut Bracket (NC)
Eaves beam
G140/150
Stanchion
Cleat
(MS120x)
Eaves Beam
Cleat (EBC1)
Eaves Beam
Vertical
Connection
Cleat (EBC1)
Angle Cleat
Multichannel
Rail Section
G140/150
Section
Angle Cleat
(MTC)
G140/150
(Panel Joint Rail)
Multibracket
Connection
(MB1A)
Rail Cleat
(eg. MD205)
Multibeam G140/150
(Panel Joint Rail) at
Stanchions
Multibracket
(MB1A)
Multichannel
Rails
101
Multichannel
G140/150
Stanchion Cleat
(MS120x)
Rod Diagonals
(TRHD)
Multichannel - Applications
Parapet Posts
Multichannel can be used as an efficient and economical parapet
post section to support vertical or horizontally laid cladding on
industrial and commercial buildings.
The Multichannel parapet post can be supplied as a kit for
assembly on site or as a fully assembled component ready to
attach to the main steelwork and complete with attachment cleats
to suit Multichannel or Multibeam horizontal cladding rails.
Use the Toolkit design software to select sections against the
applied wind loads and dead weights of the supported cladding.
Tapered packing
(if required)
Gable
with
Parapet
Compound Multichannel
Fascia Post
Flashing
Multichannel
Internal flashing
Multibeam
Purlin
Multichannel
Trimmers
AUTOFORM End
connection
Window Trimmers
102
Multichannel Rails
Multichannel
door posts
Window Openings
Multichannel Rails
Door Openings
Mezzanine Floors
Multichannels can be used for primary or secondary floor
beams in mezzanine floor applications. They can also be used
singly or compounded to form columns, and can be used as
stair rails and treads providing a completely pre-engineered
mezzanine floor package.
Multichannel Mezzanine floor beams can be utilised with all
popular types of flooring including checkerplate, timber etc.
They can be fitted between steel or over steel supports either
with or without cleats. Fitting over steelwork gives the
economy of double span members but increases the depth of
the floor structure.
Construction details are provided for all three systems,
please see pages 111 and 112 for further information.
Brickwork Restraints
The Multichannel brickwork
restraint has been developed to
accommodate standard brick
and block sizes used in
construction today. The restraint
provides an efficient method of
restraining brickwork panels in
steel framed buildings.
Compared with hotrolled
alternatives it is easier to handle on site due to its light weight and
no additional finishing is required.
Gable Posts
103
Multichannel
50
Exploded View
Bolt-on Cleat
Sleeve
Exploded View
For product dimensions refer to pages 114, 115 and 118.
104
Weld-on Cleat
Corner
stanchion
Gable rail
Double cleat
(bolt on application)
Typical use of
extended stooled cleat
AUTOFORM End
AUTOFORM End
Double cleat
Cladding rail
Stanchion
AUTOFORM
connection
into rail flange
Multichannel
AUTOFORM End
connection
Multchannel
Rail
105
20
30
Plastic washer
under nut
Multibeam or
Multichannel can
be used in Firewall
application
Plastic
washers
Adjustment
Cleat
MTC
Cleat G140/150
TRHD
Rod Diagonal
Adjustment
50
106
Stanchion
475
475
475
Multichannel
475
107
Cleat
Adjustment
110
Stanchion
Adjustable diagonal
tie wires for
levelling purposes
Multichannel
Autoform In
30 Max
Adjustment
Adjustment
30 Max
Adjustable
diagonal tie
wires for
levelling
purposes
108
Adjustable
diagonal tie
wires for
levelling
purposes
Door Openings
Standard Door Detail
Multichannel Door
Header Rail
Autoform or
Cleader Header
Rail Connection
Multichannel Rails
Bolt-on Single
Rail Cleats
Bolt-on Single
Rail Cleats
Autoform
Rail
Connection
Hot-rolled or Multichannel
Door Post
Cleated or Autoform
Base Connection
Autoform or Cleated
Base Connection
Window Openings
Multichannel
Trimmers
Multichannel
Multibeam or
Multichannel Rails
AUTOFORM
End
connection
AUTOFORM End detail
109
Column Base
AUTOFORM End
connection
Base
cleats
Gable Post
Multichannel Rail
50 5
475
Bolt-on
Cleat
Gable Post
(Compound
Multichannel)
110
Column
Stay
Mid Span
Restraint
M12 Screwed
Rod
Heavy Duty
Mezzanine Floor
Restraint SWF
Multichannel
Multichannel
Notch
AUTOFORM Ends
111
100 CRS
20
10
6mm
10
100
112
Case Study
The Pillar Box, Coventry
Multichannel
A major regeneration and refurbishment of the old Post Office creating accommodation for
over 100 students at Coventry University. Kingspan Structural Products provided a complete
steel frame incorporating Multibeam purlins and Multichannel rails and joists.
113
Weight
Kg/m
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
Dims (mm)
A
B
145
145
145
145
145
145
145
145
175
175
175
175
175
175
175
175
175
205
205
205
205
205
205
205
205
205
205
205
Gauge
(mm)
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
References
Weight
Kg/m
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070220
L235070250
L235070270
L265070140
L265070150
L265070160
L265070180
L265070200
L265070220
L265070250
L265070270
L300090150
L300090160
L300090180
L300090200
L300090250
L300090270
L350090150
L350090160
L350090180
L350090200
L350090250
L350090270
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.64
6.03
6.78
7.56
9.44
10.23
6.20
6.63
7.45
8.32
10.39
11.25
Dims (mm)
A
B
235
235
235
235
235
235
235
235
235
235
265
265
265
265
265
265
265
265
300
300
300
300
300
300
350
350
350
350
350
350
Gauge
(mm)
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
90
90
90
90
90
90
90
90
90
90
90
90
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
Reference Key
L
Multichannel
Section
L145
70 Flange
175
070
Section Flange
Depth
L175
70 Flange
120
L350
90 Flange
1.2mm gauge
L205
70 Flange
L235
70 Flange
L300
90 Flange
L265
70 Flange
Lip
Gauge T
Dim A
Dim B
114
L145
Gauges
L175
Gauges
L205
Gauges
L235
Gauges
L265
Gauges
L300
Gauges
L350
Gauges
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
-
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.2
2.5
-
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.3
1.4
1.5
1.6
1.7
1.8
2.0
2.2
2.5
2.7
1.4
1.5
1.6
1.8
2.0
2.2
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
1.5
1.6
1.8
2.0
2.5
2.7
Multicleats
Table 4:1 Multicleat References
Cleat Type
Sheeting Line
(mm)
Weld-On
Bolt-On
Multichannel Section
Depths (mm)
Double
Single
Double
Single
G140/150
145
up to 175
up to 205
up to 235
up to 265
300
350
MD 145
MD 175
MD 205
MD 235
MD 265
MD 300
MD 350
MS 120x
MS 145
MS 175
MS 205
MS 235
MS 265
MS 300
MS 350
MD 145BB
MD 175BB
MD 205BB
MD 235BB
MD 265BB
MD 300BB
MD 350BB
MS 120Bx
MS 145BB
MS 175BB
MS 205BB
MS 235BB
MS 265BB
MS 300BB
MS 350BB
151
181
211
241
271
306
356
*All Cleats are supplied in unpainted steel as standard. Painted or galvanised finishes are available if required.
Please note, for galvanised finish there is an extended lead time, please contact our Sales Department for more information.
Bolt-on Black
Bolt-on Painted
Bolt-on Galvanised
Example
BB
BE
BG
Stiffened
Extended
MD175BB
MD175BE
MD175BG
S
X
MD350
MD265BS
MD265X300
(ie; 300mm from
rafter face)
MD300
300/350 deep are supplied stiffened, see page 117 for details.
Single
17
105
Double
30 30 30 30 26
17
105
30 30 30 30 26
150
17
MD265
105
30
MD235
30
MD205
26
100
35
35
MD175
Extended length
cleats
Multi
ost
the m
e
d
i
v
o
pr
mical
econo
r
ion fo
t
u
l
o
s
ls.
ff rai
o
d
e
stool
MD145
80
115
Multichannel
14mm
diameter
fixing holes
Bolt-On
Single Cleat
Bolt-On
Double Cleat
G140/150
145
175
205
235
265
300
350
6
6
6
8
8
8
8
8
Cleat
Dim H (mm)
50
60
70 (standard)
80
90
100
55
55
50
50
50
50
Base Plate
See table 4:3 for thickness
100
100
Optional plate
for bolt-on cleat
Cross
Centres*
allow
cleats
Multi
ction
ing se
differ
used
to be
sizes
ion,
t
eleva
y
n
a
on
ning
aintai
m
e
l
i
wh
tant
a cons
e.
ng lin
sheeti
116
Multicleat Arrangement
Diagram A
shows a 265 section fixed to a 265 cleat.
450 Max
Diagram B
shows a 205 section fixed to a 265 cleat.
Stiffener plate
Multichannel
200
117
a
a
100
325
aa
Multichannel Sleeves
Symmetrical about
CL
50
Holes
Varies
with
Purlin
Depth
500
15
Dim X
Sleeve
Reference
CSL14570
CSL17570
CSL20570
CSL23570
CSL26570
CSL30090
CSL35090
145
175
205
235
265
300
350
70
70
70
70
70
90
90
50
50
25
Dim A
Notches
Notch Reference
118
50
25
Notch
Depth
Section Min.
(mm)
Notch Depth
Autoform In
N3
N1
N2
N3
N4
All
145
175
205
235
265
300
350
30
11
11
11
11
11
11
11
Max.
(mm)
250
48
61
76
*
*
*
*
Dim A
11
N1
Notch Length
50mm min
(max hole
centres
depends on
AUTOFORM
depth)
Autoform Out
11
N2
30
50
50
25
N4
35
25
CL
Notch
Length
*For maximum notch depth please contact our Customer Service Department
For construction details see pages 109, 110 and 111.
a
a
Maximum length 2.5m
a
a
30
Part Reference
35
TSA0000
where 0000 = Rail Centres
eg; TSA1000 (Rail Centres = 1000mm)
30
M12 Thread
For design details see page 98. For construction details see page 76.
35
Part Reference
30
TSB0000
where 0000 = Rail Centres
eg; TSB1000 (Rail Centres = 1000mm)
For design details see page 98. For construction details see page 76.
33
SWF0000
where 0000 = Overall length
eg; SWF1500 (Overall length = 1500mm)
Purlin/
rail
depth 4mm
33
Varies with
purlin/rail
depth
55
55
60
Clamp Plates
CA
Screwed Rod
TR0000
where 0000 = Dim A
Purlin/
rail
depth 4mm
Varies with
purlin/rail
depth
80
80
60
40x50x3mm plate
Multichannel
Part Reference
CA
Dim A plus 50
25
Dim A
Max length 4m
25
M12 Thread
119
aa
2.4
Maximum length 2m
aa
25
RNA0000
where 0000 = Length between
Hole Centres
eg; RNA1000 (Hole Centres = 1000mm)
38
Purlin Hole
14 dia.
38
2.0
Part Reference
Maximum length 2m
25
RNB0000
where 0000 = Length between
Hole Centres
eg; RNB1000 (Hole Centres = 1000mm)
25
45
DB
Single
DA
Double
DB
DA
Dim Y
state your dimension X and Y
For design details see pages 98, 99 and 100. For construction details see page 108.
Cleat Reference
Length
L175
L205
L235
L265
L300
L350
MC175
MC205
MC235
MC265
MC300
MC350
155mm
185mm
215mm
245mm
280mm
330mm
50
MTC Cleats
Length
25
50
75
100
100
25 25
TO SUIT RAIL
Rail Depth
MTC145
MTC175
MTC205
MTC235
MTC265
MTC300
MTC350
145mm
175mm
205mm
235mm
265mm
300mm
350mm
120
If using
single cleats,
increase
Dim Y by
50mm
Dim X
rail crs
Mainframe Hole
18 dia.
Purlin Hole
14 dia.
45
40
40
20
60
18
80
18
NON-HANDED
a
a
a
a
Rod Diagonal
TRHD0000
where 0000 = length between hole centres
eg; TRHD1000 (Hole Centres = 1000mm)
50
Varies
50
130
G140/150
Maximum length = 8 metres
1.5mm galvanised steel.
116
13
20
45
30
120
20
30
55
20
140
Multibracket
20
30
30
28
65
18
43
38
130
18
18
20
40
18
130
Note: Multibrackets are not suitable for connecting sections to a 90mm flange.
25
100
100
20
Part Reference
SM0000
where 0000 = required length Dim L
25
78
43
23
70
Dim L
121
Multichannel
Rail Stubs
Fl
mm
t
mm
Area
cm2
Wt
kg/m
Ixx
cm4
Gross Zxx
cm3
Iyy
cm4
Zyy
cm3
Rxx
cm
Ryy
cm
Section
2Iyy
cm4
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070220
L235070250
L235070270
L265070140
L265070150
L265070160
L265070180
L265070200
L265070220
L265070250
L265070270
L300090150
L300090160
L300090180
L300090200
L300090250
L300090270
L350090150
L350090160
L350090180
L350090200
L350090250
L350090270
145
145
145
145
145
145
145
145
175
175
175
175
175
175
175
175
175
205
205
205
205
205
205
205
205
205
205
205
235
235
235
235
235
235
235
235
235
235
265
265
265
265
265
265
265
265
300
300
300
300
300
300
350
350
350
350
350
350
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
90
90
90
90
90
90
90
90
90
90
90
90
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
1.20
1.30
1.40
1.50
1.60
1.80
2.00
2.20
2.50
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.30
1.40
1.50
1.60
1.70
1.80
2.00
2.20
2.50
2.70
1.40
1.50
1.60
1.80
2.00
2.20
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
1.50
1.60
1.80
2.00
2.50
2.70
3.68
3.99
4.30
4.60
4.91
5.51
6.11
6.71
4.03
4.37
4.71
5.04
5.38
6.04
6.70
7.36
8.33
4.38
4.75
5.11
5.48
5.84
6.21
6.57
7.29
8.00
9.06
9.76
5.12
5.52
5.92
6.31
6.70
7.10
7.88
8.65
9.80
10.56
5.93
6.36
6.78
7.63
8.47
9.30
10.54
11.36
7.42
7.92
8.91
9.89
12.33
13.30
8.15
8.70
9.79
10.87
13.56
14.63
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
5.64
6.03
6.78
7.56
9.44
10.23
6.20
6.63
7.45
8.32
10.39
11.25
125.52
135.84
146.07
156.23
166.30
186.23
205.84
225.36
193.51
209.48
225.31
241.06
256.66
287.59
318.05
348.06
392.24
279.52
302.65
325.60
348.43
371.06
393.58
415.95
460.21
503.86
568.20
610.33
417.05
448.77
480.31
511.60
542.75
573.70
634.98
695.46
784.71
843.21
596.64
638.68
680.39
763.22
845.00
925.77
1045.09
1123.36
989.64
1054.74
1184.14
1312.17
1626.46
1749.84
1425.79
1519.82
1706.85
1892.02
2347.16
2526.07
17.32
18.74
20.15
21.56
22.94
25.69
28.40
31.09
22.12
23.95
25.76
27.56
29.34
32.87
36.36
39.79
44.84
27.28
29.53
31.77
34.00
36.21
38.41
40.59
44.91
49.17
55.45
59.56
35.50
38.20
40.88
43.55
46.20
48.83
54.05
59.20
66.80
71.77
45.04
48.21
51.36
57.61
63.78
69.88
78.89
84.79
65.98
70.33
78.95
87.49
108.45
116.67
81.48
86.86
97.55
108.13
134.14
144.36
26.07
28.12
30.14
32.14
34.09
37.93
41.65
45.34
27.79
29.98
32.13
34.26
36.34
40.44
44.40
48.24
53.77
29.24
31.54
33.80
36.04
38.23
40.40
42.53
46.70
50.74
56.55
60.26
32.87
35.22
37.55
39.83
42.09
44.32
48.66
52.86
58.91
62.77
36.45
38.86
41.22
45.86
50.34
54.68
60.94
64.93
74.10
78.69
87.76
96.58
117.65
125.68
77.26
82.05
91.50
100.69
122.63
130.99
4.64
5.06
5.47
5.88
6.29
7.11
7.91
8.72
4.65
5.07
5.48
5.89
6.30
7.12
7.92
8.71
9.87
5.68
5.08
5.49
5.91
6.31
6.72
7.13
7.93
8.72
9.88
10.63
5.09
5.51
5.92
6.33
6.73
7.14
7.94
8.73
9.89
10.64
5.52
5.93
6.34
7.15
7.95
8.74
9.90
11.97
8.66
9.26
10.48
11.68
14.63
15.78
8.68
9.29
10.51
11.71
14.66
15.81
5.86
5.85
5.85
5.85
5.84
5.83
5.82
5.82
6.95
6.95
6.94
6.94
6.93
6.92
6.91
6.90
6.89
8.01
8.01
8.00
8.00
7.99
7.99
7.98
7.97
7.96
7.94
7.93
9.05
9.04
9.03
9.03
9.02
9.02
9.00
8.99
8.97
8.96
10.06
10.05
10.04
10.03
10.02
10.00
9.98
9.97
11.55
11.54
11.53
11.52
11.48
11.47
13.23
13.22
13.21
13.19
13.16
13.14
2.67
2.66
2.66
2.65
2.64
2.63
2.62
2.61
2.63
2.63
2.62
2.62
2.61
2.60
2.58
2.57
2.55
2.59
2.59
2.58
2.57
2.57
2.56
2.55
2.54
2.53
2.51
2.49
2.54
2.53
2.53
2.52
2.51
2.51
2.49
2.48
2.46
2.44
2.49
2.48
2.47
2.46
2.44
2.43
2.41
2.40
3.16
3.15
3.14
3.12
3.09
3.07
3.08
3.07
3.06
3.04
3.01
2.99
0.55
0.58
0.61
0.64
0.67
0.72
0.75
0.78
0.51
0.53
0.56
0.59
0.61
0.65
0.69
0.72
0.75
0.47
0.49
0.52
0.54
0.56
0.58
0.60
0.63
0.66
0.69
0.71
0.46
0.48
0.50
0.52
0.54
0.56
0.59
0.61
0.64
0.65
0.45
0.47
0.49
0.52
0.55
0.57
0.60
0.61
0.40
0.42
0.46
0.50
0.57
0.59
0.37
0.39
0.42
0.45
0.52
0.54
80.30
86.82
93.27
99.67
105.99
118.47
130.69
142.67
80.30
86.82
93.28
99.67
106.00
118.47
130.69
142.67
160.19
80.30
86.82
93.28
99.67
106.00
112.27
118.47
130.70
142.68
160.20
171.58
86.82
93.28
99.67
106.00
112.27
118.47
130.70
142.68
160.20
171.59
93.28
99.67
106.00
118.48
130.70
142.69
160.21
171.60
196.56
209.22
234.22
258.83
318.59
341.80
196.56
209.22
234.23
258.83
318.60
341.82
122
Thickness
mm
Area
cm2
Weight
kg/m
lxx
cm4
Zxx
Pos cm3
Zxx
Neg cm3
lyy
cm4
Zyy
cm3
Rxx
cm
Ryy
cm
1.50
5.10
4.00
78.08
22.67
9.13
164.43
28.81
3.91
5.63
4.00
4.50
5.00
Section
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
Weight
kg/m
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
13.60
15.60
17.65
19.73
21.81
26.34
29.90
33.70
39.12
15.23
18.23
20.72
23.24
25.77
28.28
30.76
35.59
12.09
13.86
15.69
17.54
19.38
23.05
26.58
29.51
33.16
14.04
16.21
18.42
20.66
22.91
25.13
27.35
31.64
10.88
12.48
14.12
15.78
17.45
20.69
22.84
24.92
28.02
12.64
14.59
11.58
18.60
20.62
22.62
24.61
27.98
5.42
5.87
6.31
6.75
7.19
8.05
8.90
9.75
10.98
7.83
8.47
9.12
9.76
10.39
11.02
11.64
12.89
4.28
4.63
4.99
5.33
5.68
6.36
7.04
7.70
8.68
6.19
6.70
7.20
7.71
8.21
8.71
9.20
10.18
3.47
3.75
4.04
4.32
4.60
5.15
5.70
6.24
7.03
5.01
5.42
5.84
6.24
6.65
7.05
7.46
8.25
3.90
4.22
4.54
4.86
5.17
5.80
6.41
7.02
7.91
5.63
6.10
6.56
7.02
7.48
7.93
8.39
9.28
3.08
3.34
3.59
3.84
4.09
4.58
5.06
5.55
6.25
4.45
4.82
5.19
5.55
5.91
6.27
6.63
7.33
2.49
2.70
2.91
3.11
3.31
3.71
4.10
4.49
5.06
3.61
3.91
4.20
4.50
4.79
5.08
5.37
5.94
Multichannel
Span
(m)
123
6.0
6.5
7.0
124
Section
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
Weight
kg/m
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
9.89
11.34
12.83
14.35
15.50
17.33
19.13
20.89
23.49
11.48
13.26
15.07
16.90
18.74
20.09
21.20
23.39
12.11
12.88
14.41
15.91
17.39
19.57
10.53
12.16
13.82
14.81
15.74
16.67
17.60
19.42
11.64
12.37
13.83
15.26
16.65
18.70
9.72
11.22
12.75
14.27
15.17
16.06
16.95
18.69
21.57
22.91
9.93
10.55
11.79
13.01
14.20
15.95
9.02
10.42
11.38
12.16
12.93
13.69
14.44
15.93
17.38
19.51
2.86
3.10
3.34
3.57
3.80
4.26
4.71
5.16
5.81
4.14
4.48
4.82
5.16
5.50
5.83
6.16
6.82
3.00
3.19
3.58
3.96
4.33
4.88
3.48
3.77
4.05
4.33
4.62
4.90
5.18
5.73
2.56
2.72
3.05
3.37
3.69
4.16
2.96
3.21
3.45
3.69
3.94
4.17
4.41
4.88
5.34
6.02
2.20
2.35
2.63
2.91
3.18
3.59
2.56
2.77
2.98
3.18
3.39
3.60
3.80
4.21
4.61
5.19
2.06
2.23
2.40
2.57
2.74
3.07
3.39
3.71
4.18
2.98
3.23
3.47
3.72
3.96
4.20
4.43
4.91
2.16
2.30
2.58
2.85
3.12
3.52
2.50
2.71
2.92
3.12
3.33
3.52
3.73
4.12
1.84
1.96
2.20
2.43
2.66
2.99
2.13
2.31
2.49
2.66
2.83
3.01
3.18
3.51
3.85
4.34
1.59
1.69
1.89
2.09
2.29
2.58
1.84
1.99
2.14
2.30
2.44
2.59
2.74
3.03
3.32
3.74
4.0
4.5
5.0
5.5
Section
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
Weight
kg/m
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
11.07
13.35
15.75
18.24
20.77
25.88
30.85
35.60
42.30
10.85
13.34
16.03
18.89
21.87
24.93
28.04
34.25
9.22
11.05
12.96
14.93
16.92
20.93
24.80
28.49
33.69
9.20
11.25
13.43
15.74
18.12
20.55
23.00
27.86
8.65
10.31
12.03
13.80
15.59
19.16
22.60
25.87
30.50
8.77
10.66
12.67
14.77
16.92
19.11
21.31
25.63
8.13
9.64
11.21
12.81
14.43
17.64
20.74
23.34
26.58
8.36
10.11
11.96
13.88
14.87
16.73
18.49
20.98
13.05
14.13
15.20
16.26
17.31
19.40
21.45
23.48
26.46
18.85
20.41
21.96
23.50
25.03
26.55
28.05
31.04
10.31
11.16
12.01
12.85
13.68
15.33
16.95
18.55
20.90
14.90
16.13
17.35
18.57
19.77
20.97
22.17
24.53
8.35
9.04
9.73
10.41
11.08
12.41
13.73
15.02
16.93
12.07
13.06
14.06
15.04
16.02
16.99
17.96
19.87
6.90
7.47
8.04
8.60
9.16
10.26
11.35
12.42
13.99
9.97
10.80
11.62
12.43
13.24
14.04
14.84
16.42
9.40
10.17
10.94
11.71
12.46
13.97
15.45
16.90
19.05
13.57
14.70
15.81
16.92
18.02
19.11
20.20
22.35
7.43
8.04
8.65
9.25
9.85
11.03
12.20
13.36
15.05
10.73
11.61
12.49
13.37
14.24
15.10
15.96
17.66
6.01
6.51
7.00
7.49
7.98
8.94
9.88
10.82
12.19
8.69
9.41
10.12
10.83
11.53
12.23
12.93
14.30
4.97
5.38
5.79
6.19
6.59
7.39
8.17
8.94
10.08
7.18
7.77
8.36
8.95
9.53
10.11
10.68
11.82
Multichannel
Span
(m)
125
6.5
7.0
Weight
kg/m
Section
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
11.94
13.41
16.34
19.15
21.82
25.61
7.97
9.59
11.30
13.06
14.86
16.67
18.47
22.00
11.17
12.52
15.20
17.78
20.23
23.71
7.60
9.11
10.69
12.32
13.98
15.64
17.30
20.52
23.62
28.03
10.48
11.73
14.20
16.58
18.84
22.06
7.25
8.67
10.14
11.66
13.19
14.72
16.25
19.22
22.07
26.13
11.94
13.41
16.34
19.15
21.82
25.61
7.97
9.59
11.30
13.06
14.86
16.67
18.47
21.52
11.17
12.52
15.20
17.78
20.23
23.71
7.60
9.11
10.69
12.32
13.98
15.64
17.30
20.52
23.62
28.03
10.48
11.73
14.20
16.58
18.84
22.06
7.25
8.67
10.14
11.66
13.19
14.72
16.25
19.22
22.07
26.13
RNB Angle 45 x 45
Ultimate compression
kN
17.54
17.05
16.55
16.1
15.75
15.55
-
8.67
9.23
10.35
11.44
12.52
14.11
10.05
10.89
11.71
12.53
13.35
14.16
14.96
16.55
7.39
7.87
8.81
9.75
10.67
12.02
8.57
9.28
9.98
10.68
11.37
12.06
12.75
14.11
15.44
17.42
6.37
6.78
7.60
8.41
9.20
10.37
7.39
8.00
8.61
9.21
9.81
10.40
10.99
12.16
13.32
15.02
7.23
7.69
8.62
9.53
10.43
11.76
8.38
9.07
9.76
10.44
11.12
11.80
12.47
13.80
6.16
6.56
7.35
8.12
8.89
10.02
7.14
7.73
8.32
8.90
9.48
10.05
10.62
11.75
12.87
14.51
5.31
5.65
6.33
7.00
7.67
8.64
6.16
6.67
7.17
7.67
8.17
8.67
9.16
10.14
11.10
12.51
5.20
5.54
6.21
6.86
7.51
8.47
6.03
6.53
7.03
7.52
8.01
8.49
8.98
9.93
4.43
4.72
5.29
5.85
6.40
7.21
5.14
5.57
5.99
6.41
6.82
7.24
7.65
8.46
9.27
10.45
3.82
4.07
4.56
5.04
5.52
6.22
4.43
4.80
5.16
5.53
5.88
6.24
6.60
7.30
7.99
9.01
126
Span
(m)
3.0
3.5
4.0
4.5
Ultimate
Pressure
Kn
23.44
19.66
16.73
14.33
Ultimate
Suction
Kn
9.21
7.72
6.58
6.68
Deflection
L/150
Kn
9.10
6.69
5.12
4.05
Siderail
Section
4.0
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
4.5
5.0
5.5
Weight
kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
9.39
11.06
12.79
14.56
16.33
19.85
23.22
26.41
8.62
10.1
11.63
13.19
14.75
17.85
20.82
23.62
7.95
9.28
10.65
12.04
13.44
16.2
18.85
21.35
8.62
10.31
12.03
13.8
7.36
8.57
9.81
11.07
12.33
14.82
17.21
19.47
8.13
9.64
11.21
12.81
14.43
17.64
20.74
9.39
11.06
12.79
14.56
16.33
19.85
23.22
26.41
8.62
10.1
11.63
13.19
14.75
17.85
20.82
23.62
7.95
9.28
10.65
12.04
13.44
16.2
18.85
21.35
8.62
10.31
12.03
13.8
7.36
8.57
9.81
11.07
12.33
14.82
17.02
18.74
8.13
9.64
11.21
12.81
14.43
17.64
20.74
19.83
21.47
23.08
24.69
26.28
29.43
32.53
35.61
15.67
16.96
18.24
19.51
20.76
23.25
25.7
28.14
12.69
13.74
14.77
15.8
16.82
18.83
20.82
22.79
19.57
21.19
22.79
24.38
10.49
11.35
12.21
13.06
13.9
15.57
17.2
18.84
16.17
17.51
18.83
20.15
21.45
22.57
26.58
Span
(m)
Siderail
Section
6.0
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L205070120
L205070130
L205070140
L205070150
L175070150
L175070160
L175070180
L175070200
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
6.5
7.0
Weight
kg/m
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
3.29
3.58
3.84
4.13
3.79
4.05
4.55
5.08
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
9.08
10.23
11.38
13.19
14.69
16.15
7.65
9.04
10.48
11.94
13.41
16.22
18.25
7.97
9.59
11.3
13.06
11.17
12.52
15.52
17.78
7.6
9.11
10.69
12.32
13.98
15.64
17.3
20.52
9.28
11.07
12.94
14.87
16.83
18.8
22.72
7.25
8.67
10.14
11.66
13.19
14.72
16.25
19.22
8.91
10.58
12.33
14.13
15.95
17.78
21.39
10.26
10.97
11.68
13.08
14.46
15.83
13.59
14.71
15.82
16.93
18.03
20.2
22.34
19.63
21.26
22.87
24.47
14.43
11.03
17.21
19.03
16.73
18.11
19.48
20.85
22.2
23.55
24.89
27.54
24.96
26.86
28.74
30.62
32.48
34.33
38.87
14.42
15.62
16.8
17.98
19.15
20.31
21.46
23.75
21.52
23.16
24.78
26.4
28.01
29.6
32.76
Multichannel
Span
(m)
127
Siderail
Section
4.0
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
Restraints at
mid-span
Span
(m)
Restraints at
mid-span
4.5
Restraints at mid-span
5.0
Restraints at mid-span
5.5
128
Weight
kg/m
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
12.83
15.06
17.38
19.77
22.19
27.04
31.76
36.29
11.79
13.8
15.89
18.02
20.18
24.51
28.71
32.72
10.91
12.73
14.62
16.55
18.5
22.32
25.98
29.46
12.33
14.47
16.8
19.19
10.11
11.7
13.35
15.03
16.71
20.06
23.29
26.37
11.46
13.51
15.65
17.78
19.88
24.06
28.1
23.01
24.9
26.77
28.64
30.48
34.14
37.73
41.31
18.18
19.67
21.16
22.63
24.08
26.97
29.81
32.64
14.72
15.94
17.14
18.33
19.51
21.85
24.15
26.44
22.7
24.57
26.43
28.28
12.17
13.17
14.16
15.15
16.12
18.06
19.96
21.85
18.76
20.31
21.84
23.37
24.88
27.88
30.84
6.5
12.1
13.6
15.09
18.05
20.9
23.62
10.69
12.47
14.3
16.16
18.01
21.71
25.26
11.56
13.78
16.07
18.3
13.01
14.59
16.18
19.32
22.35
25.23
11.32
13.28
15.29
17.36
19.42
23.45
27.23
12.26
14.6
17.03
19.52
16.12
17.91
21.46
24.89
11.62
13.79
16.04
18.34
20.66
22.94
25.06
29.22
11.15
13.51
19.9
22.62
25.37
28.12
33.31
11.9
12.73
13.55
15.17
16.77
18.36
15.76
17.07
18.36
19.64
20.91
23.43
25.91
22.77
24.66
26.53
28.39
10.94
11.71
12.46
13.95
15.42
16.89
14.5
15.7
16.88
18.06
19.23
21.55
23.83
20.94
22.68
24.4
26.11
15.39
16.39
18.36
20.31
17.85
19.32
20.79
22.24
23.69
25.13
26.56
29.38
26.63
28.65
30.66
32.66
34.65
36.63
40.54
7.0
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070220
L235070250
L235070270
L265070140
L265070150
L265075160
L265070180
L265070200
L265070220
L265070250
L265070270
12.1
13.6
15.09
18.05
20.9
23.62
10.69
12.47
14.3
16.16
18.01
21.71
25.26
11.56
13.78
16.07
18.3
13.01
14.59
16.18
19.32
22.35
25.23
11.32
13.28
15.29
17.36
19.42
23.45
27.23
12.26
14.6
17.03
19.52
16.12
17.91
21.46
24.89
11.62
13.79
16.04
18.34
20.66
22.94
25.06
29.22
11.15
13.51
19.9
22.62
25.37
28.12
33.31
7.5
8.0
8.5
Weight
kg/m
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
4.46
4.79
5.13
5.76
6.43
7.03
8.03
8.70
10.99
13
15.07
17.18
19.14
21.08
23.02
26.79
13.83
16.23
18.7
21.2
23.72
26.13
30.58
10.34
12.2
14.07
15.86
17.65
19.42
21.18
24.61
13.06
15.29
17.56
19.86
22
24.07
28.11
14.66
16.28
17.9
19.5
22.61
12.33
14.39
16.49
18.4
20.3
22.18
25.85
11.62
13.49
15.22
16.96
18.67
20.37
23.67
26.85
31.43
34.37
14.31
16.51
17.18
22.64
26.47
30.18
35.54
38.99
15.39
16.66
17.92
19.18
20.43
21.67
22.9
25.33
22.9
24.7
26.44
28.16
29.88
31.58
34.95
13.4
14.51
15.56
16.71
17.79
18.87
19.95
22.07
20
21.52
23.03
24.53
26.03
27.51
30.45
14.68
15.64
16.59
17.53
19.4
17.58
18.91
20.24
21.56
22.88
24.18
26.76
15.57
16.75
17.93
19.1
20.26
21.42
23.71
25.96
29.3
31.48
22.28
23.84
25.4
28.49
31.55
34.56
39.02
41.94
Multichannel
6.0
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
3.29
3.58
3.84
4.13
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
3.29
3.58
3.84
4.13
3.79
4.05
4.55
5.08
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
3.86
4.14
4.45
4.76
5.04
5.35
5.97
Siderail
Section
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L205070120
L205070130
L205070140
L205070150
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L205070120
L205070130
L205070140
L205070150
L175070150
L175070160
L175070180
L175070200
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
Span
(m)
6.0
Weight
kg/m
Siderail
Section
Restraints at mid-span
Span
(m)
129
3.5
4.0
4.5
Section
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
Weight
kg/m
Ultimate
Allowable
Load kN
Deflection
Limit
L/250 kN
Deflection
Limit
L/360 kN
2.75
2.99
3.21
3.45
3.69
4.15
4.63
3.02
3.29
3.52
3.79
4.05
4.55
5.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
3.02
3.29
3.52
3.79
4.05
4.55
5.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.02
3.29
3.52
3.79
4.05
4.55
14.93
17.04
19.22
21.43
23.64
28.04
32.25
17.84
20.80
23.53
26.30
29.08
34.58
39.86
12.80
14.61
16.47
18.37
20.27
24.03
27.65
15.54
17.83
20.17
22.55
24.92
29.64
34.17
11.20
12.78
14.41
16.07
17.73
21.02
24.19
27.19
13.60
15.60
17.65
19.73
21.81
25.94
29.90
33.70
39.12
12.09
13.86
15.69
17.54
19.38
23.05
8.78
9.51
10.22
10.93
11.64
13.03
14.41
13.54
14.66
15.76
16.87
17.96
20.12
22.26
6.45
6.98
7.51
8.03
8.55
9.57
10.58
9.95
10.77
11.58
12.39
13.19
14.78
16.35
4.94
5.35
5.75
6.15
6.55
7.33
8.10
8.87
7.62
8.25
8.87
9.49
10.10
11.32
12.52
13.70
15.44
6.02
6.51
7.01
7.50
7.98
8.94
7.32
7.92
8.52
9.11
9.70
10.86
12.00
11.28
12.21
13.14
14.05
14.97
16.77
18.55
5.38
5.82
6.26
6.69
7.12
7.98
8.82
8.29
8.97
9.65
10.33
11.00
12.32
13.62
4.12
4.46
4.79
5.12
5.45
6.11
6.75
7.39
6.35
6.87
7.39
7.91
8.42
9.43
10.43
11.42
12.87
5.01
5.43
5.84
6.25
6.65
7.45
Span
(m)
5.0
5.5
6.0
Section
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070220
L235070250
L235070270
Weight
kg/m
Ultimate
Allowable
Load kN
Deflection
Limit
L/250 kN
Deflection
Limit
L/360 kN
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.29
3.58
3.84
4.13
4.41
4.67
4.96
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
26.58
29.95
34.77
14.04
16.21
18.42
20.66
22.91
10.88
12.48
14.12
15.78
17.45
20.75
23.92
26.96
31.30
12.64
14.59
16.58
18.60
20.62
11.48
13.26
15.07
16.90
18.74
20.56
22.37
25.88
29.27
34.13
37.27
17.18
18.85
20.51
23.72
26.83
31.29
34.16
13.75
15.71
17.70
19.69
21.67
23.63
27.46
31.16
36.53
40.01
9.89
10.82
12.20
8.69
9.41
10.13
10.84
11.54
4.87
5.28
5.68
6.07
6.47
7.24
8.01
8.77
9.88
7.04
7.62
8.20
8.78
9.35
5.82
6.30
6.78
7.25
7.72
8.19
8.66
9.58
10.49
11.83
12.71
6.49
6.89
7.28
8.05
8.81
9.94
10.68
7.30
7.85
8.40
8.95
9.49
10.04
11.11
12.17
13.73
14.75
8.24
9.02
10.17
7.24
7.84
8.44
9.03
9.62
4.06
4.40
4.73
5.06
5.39
6.04
6.68
7.31
8.23
5.87
6.35
6.84
7.31
7.79
4.85
5.25
5.65
6.04
6.44
6.83
7.22
7.98
8.74
9.86
10.59
5.41
5.74
6.06
6.71
7.35
8.28
8.90
6.08
6.54
7.00
7.46
7.91
8.36
9.26
10.14
11.44
12.29
NOTE: Section self weight has not been subtracted from the
loadings shown.
130
3.0
3.5
4.0
4.5
Section
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L145070120
L145070130
L145070140
L145070150
L145070160
L145070180
L145070200
L145070220
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
Weight
kg/m
Ultimate
Allowable
Load kN
Deflection
Limit
L/250 kN
Deflection
Limit
L/360 kN
2.75
2.99
3.21
3.45
3.69
4.15
4.63
3.02
3.29
3.52
3.79
4.05
4.55
5.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
3.02
3.29
3.52
3.79
4.05
4.55
5.08
2.75
2.99
3.21
3.45
3.69
4.15
4.63
5.06
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
14.93
17.04
19.22
21.43
23.64
28.04
32.25
17.84
20.80
23.53
26.30
29.08
34.58
39.86
12.80
14.61
16.47
18.37
20.27
24.03
27.65
15.54
17.83
20.17
22.55
24.92
29.64
34.17
11.20
12.78
14.41
16.07
17.73
21.02
24.19
27.19
13.60
15.60
17.65
19.73
21.81
25.94
29.90
33.70
39.12
12.09
13.86
15.69
17.54
19.38
23.05
26.58
29.95
34.77
14.04
16.21
18.42
20.66
22.91
8.78
9.51
10.22
10.93
11.64
13.03
14.41
13.54
14.66
15.76
16.87
17.96
20.12
22.26
6.45
6.98
7.51
8.03
8.55
9.57
10.58
9.95
10.77
11.58
12.39
13.19
14.78
16.35
4.94
5.35
5.75
6.15
6.55
7.33
8.10
8.87
7.62
8.25
8.87
9.49
10.10
11.32
12.52
13.70
15.44
6.02
6.51
7.01
7.50
7.98
8.94
9.89
10.82
12.20
8.69
9.41
10.13
10.84
11.54
7.32
7.92
8.52
9.11
9.70
10.86
12.00
11.28
12.21
13.14
14.05
14.97
16.77
18.55
5.38
5.82
6.26
6.69
7.12
7.98
8.82
8.29
8.97
9.65
10.33
11.00
12.32
13.62
4.12
4.46
4.79
5.12
5.45
6.11
6.75
7.39
6.35
6.87
7.39
7.91
8.42
9.43
10.43
11.42
12.87
5.01
5.43
5.84
6.25
6.65
7.45
8.24
9.02
10.17
7.24
7.84
8.44
9.03
9.62
Span
(m)
5.0
5.5
6.0
Section
L175070120
L175070130
L175070140
L175070150
L175070160
L175070180
L175070200
L175070220
L175070250
L205070120
L205070130
L205070140
L205070150
L205070160
L205070120
L205070130
L205070140
L205070150
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
L205070160
L205070170
L205070180
L205070200
L205070220
L205070250
L205070270
L235070130
L235070140
L235070150
L235070160
L235070170
L235070180
L235070200
L235070220
L235070250
L235070270
Weight
kg/m
Ultimate
Allowable
Load kN
Deflection
Limit
L/250 kN
Deflection
Limit
L/360 kN
3.02
3.29
3.52
3.79
4.05
4.55
5.08
5.56
6.35
3.29
3.58
3.84
4.13
4.41
3.29
3.58
3.84
4.13
4.41
4.67
4.96
5.53
6.05
6.91
7.49
3.29
3.58
3.84
4.13
4.41
4.67
4.96
3.86
4.14
4.45
4.76
5.04
5.35
5.97
6.53
7.46
8.08
10.88
12.48
14.12
15.78
17.45
20.75
23.92
26.96
31.30
12.64
14.59
16.58
18.60
20.62
11.48
13.26
15.07
16.90
18.74
20.56
22.37
25.88
29.27
34.13
37.27
17.18
18.85
20.51
23.72
26.83
31.29
34.16
13.75
15.71
17.70
19.69
21.67
23.63
27.46
31.16
36.53
40.01
4.87
5.28
5.68
6.07
6.47
7.24
8.01
8.77
9.88
7.04
7.62
8.20
8.78
9.35
5.82
6.30
6.78
7.25
7.72
8.19
8.66
9.58
10.49
11.83
12.71
6.49
6.89
7.28
8.05
8.81
9.94
10.68
7.30
7.85
8.40
8.95
9.49
10.04
11.11
12.17
13.73
14.75
4.06
4.40
4.73
5.06
5.39
6.04
6.68
7.31
8.23
5.87
6.35
6.84
7.31
7.79
4.85
5.25
5.65
6.04
6.44
6.83
7.22
7.98
8.74
9.86
10.59
5.41
5.74
6.06
6.71
7.35
8.28
8.90
6.08
6.54
7.00
7.46
7.91
8.36
9.26
10.14
11.44
12.29
Multichannel
Span
(m)
NOTE: Section self weight has not been subtracted from the
loadings shown.
131
Ordering Methods
Preferred methods of ordering and detailing Kingspan Multibeam Purlin, Cladding Rail
and Multichannel systems can be detailed and ordered using either of the following
quick and simple methods as follows:
Eaves Beam Hole Arrangements and Options
For examples of hole and connection details please refer to the
construction details section pages 52-57.
20
Section
depth
50
5
CL
475
100
100
==
475
100
20
See table
above
132
Sleeve
aa
175
205
235
265
300
350
Dim x hole
centres in mm
105
135
165
195
225
260
310
aa
Section Depth
mm
20
M145
M175
M205
M235
M265
M300
M350
14
28x14
54x14
Flange Holes
14 holes at 30mm backmark from heel of section.
14
18
20
30
14
M175
M205
M235
M265
M300
M350
14x28
CL
Multilok
CL
Tie position
Tie position
100
145
CL
Dim X
14 Dia. hole
14 x 28 Slot
CL
Tie position
100
M235
M265
M300
M350
175
205
30
60
14 x 28 Slot
14
Tube Ties CL
235
265
300
350
Tie position
100
web
14 Dia. hole
CL
overhang
CL
475
475
100
==
100
==
Stanchion/Rafter
restraint
133
aa
Ordering Methods
Multichannel can be supplied with plain ends (ie. Cut to length), notched ends (top, bottom or both) or Autoform Ends.
Web Holes
14mm Counterform
In Hole
14mm Counterform
Out Hole
20mm only
25mm min
20mm min
Counterform
In Hole
Shown
14
28x14
30mm min
CL
50mm min
14
Counterform
Dimensions
54x14
50mm min
7.5
30
18
20mm min
18
14mm
Counterform
In Hole
25mm min
14mm
Counterform
Out Hole
20mm only
12mm holes available, please contact our Customer Services Department for details. Minimum channel length = 125mm
Flange Holes
50
25
20mm min
20mm min
514
14x18
50mm min
(max hole centres
depends on
AUTOFORm depth)
28x14
Autoform Details
Min. Notch Depth
11mm
11mm
195mm
50mm
95mm
125mm
CL
20
Section
depth
20
See table
above
50
5
134
CL
475
100
100
==
475
100
Sleeve
aa
a
N1
Notching
Notches can be cut either top or
bottom or both. Standard notches are
25mm in depth cut to the lengths
shown below.
50
25
N3
N2
Notch Length
Notch Depth
50
25
N4
35
25
Notch
Depth
Notch Details
Hole Arrangements
Minimum backmark 20mm
(Counterform holes min 25mm
backmark).
30
50
Section
Min.
(mm)
Max.
(mm)
All
30
250
145
175
205
235
265
300
350
11
11
11
11
11
11
11
48
61
76
*
*
*
*
CL
Notch
Length
CL
475
475
100
==
Stanchion restraint
CL
overhang
100
==
135
Case Studies
Colburn Business Park, Catterick
Utilising over 3,000 sq m in total, the 6.7 hectare Colburn Business Park near Catterick in
North Yorkshire will provide high quality accommodation. The speed and efficiency that the
Multibeam provides makes it ideal for a project that requires a right first time approach.
136
Debenhams Peterborough
Over 67,000 sq m in total, the site includes a vast warehouse featuring Multibeam purlins
and rails integral to its roof, an impressive four spans wide. Timing of production and
delivery is crucial in order to coincide with the construction of the primary steelwork for
the walls and roof structure.
137
Index
A
Angle cleats
Anti-sag tie requirements Purlins
Anti-sag tie requirements Rails
Apex ties
AUTOFORM Multichannel
85,120
10
66
23,29
97,108,118
B
Base cleats Multichannel
Bottom strut bracket
Boundary Wall
Brickwork restraint
C
Cantilevers
Case Studies
Certification
Clamp plates
Cleader angles
Cleats (see also Multicleats)
Columns
Compound Multichannels
110
76,85
52,53
103
17,18
71,105,113,136
3,8,50,64,96
29,83
31
25,26,27,79,80,81,115,116,117
110
103
Section Properties
Spanning Systems
86
65
76
74
75
72
74
72
76
Multichannel
Corner - External
- Internal
Diagonal Tie Wire
Firewall
Stanchion stays
Rail Connection
Rod Diagonal with G140/150
Sleeves
105
105
108
106
107
104
106
104
Corners
Customer Service
73,105
3
Construction Details
D
Design & Ordering
Roof Purlins
Apex Restraint
Cantilever
Diagonal Tie Wire
Flat Roof/Shallow Roof arrangement
Heavy Duty Flat Roof Restraint
Multicleats
Multilok Ties
Stanchion stays
Sleeves
Tiled Roofs
Tubular Ties
23
18
23
20
20
16
21
19
17
22
21
Eaves Beam
Connection to Main Frame - Boundary Wall Gutter
- External Gutter
Restraint Connection - Boundary Wall Gutter
- External Gutter
Parapet
Mono Pitch Roof - High Eaves
52
52
53
54
55
55
Cladding Rails
Applications
Case Study
Corner - External
- Internal
Dimensions & References
Load Tables
Double Span - Vertical Cladding
- Horizontal Cladding
Material Specification
Overview
Range
Restraints
Firewall
Horizontally Laid Cladding
Overview
Vertically Laid Cladding
138
64
71
73
73
F
Firewall
Flange Variations
Flat roofs
Floor beams Mezzanine floors
134,135
136,137
134
134
13,23,31,67,76,84,108,120
102,109
56
60,61
50
50
50
51
59
52,53,54
70,99
56
15,20
103,111,112
78
G
Gable Posts
87,88,89,90
91,92,93
64
64
64
70
68,69
66
67
H
Hole Arrangements - Multibeam
- Multichannel
Horizontal cladding
Horizontal panel vertical support
103,110
134,135
136,137
68,69,100,101
74,84,106,121
Eaves Beam
Multichannel
Brickwork Restraints
Double Span - Vertical Cladding
- Horizontal Cladding
Floor Beams: - Single span between steel
- Single span with cleats
- Double span with cleats
Purlins
Double Span
Double Span Continuous System
Single Span Continuous System
Tiled Roofs
Cladding Rails
Double Span - Vertical Cladding
- Horizontal Cladding
M
Material Specification
Mezzanine Floors
MTC cleats (also see Angle cleats)
Multibracket
Multichannel
Applications
Parapets
Door & Window Openings
Mezzanine Floors
Brickwork Restraints
Gable Posts
General Engineering
Autoforms
Case Study
Load Tables
Brickwork Restraints
Double Span
- Vertical Cladding
- Horizontal Cladding
Floor Beams
- Single Span between Steel
- Single Span on cleats
Material Specification
Notches
Overview
Range
Restraints - Firewall
Restraints - Vertically Laid Cladding
Restraints - Horizontally Laid Cladding
Section Properties
Why Multichannel
Multicleats (also see cleats)
Multilok Ties
N
Notches
O
Openings
Order Forms
Ordering and Detailing
60,61
123,124,125
126,127
127,128
129
130,131,132
133
33,34,35,36,37
38,39,40,41,42
43,44,45,46,47
37
87,88,89,90
91,92,93
8,50,64,96
103,111,112
85,120
31,85,121
102
102
103
103
103
103
97,118
113
123,124,125,126
127
128,129
130
131
96
97,118
96
96
99
98
100,101
122
97
25,26,27,79,80,81,115,116,117
21,29
97,118
109
See separate handbook ref: P228
132,133,134,135
Parapet
Products Overview
Purlins
Anti Sag Requirements
Applications
Dimensions & References
Load Tables
Double Span
Double Span Continuous System
Single Span Continuous System
Tiled Roofs
Material Specification
Overview
Range
55,102
2,4,5
10
8
24
33,34,35,36,37
38,39,40,41,42
43,44,45,46,47
37
8
8
8
Restraints
Built Up
- Membrane Flat Roofs
- Roofing
- Standing Seam
Clip Fix
Downslope Ties (through fix)
Flat Roofs
Insulated Panels
Low Pitch Roof
Rooflights
Secret & Clip Fix
Secret Fix Insulated Panels
Through Fix Roofing
Tiled Roof
15
13
15
13
13
15
13
15
14
13
13
13
14
Section Properties
Spanning Systems
Tie Arrangements
32
9
11
R
Rafter Stays
Rafter Stays Capacities
Recycling
Rod Diagonals
Roof cladding types
S
SCILGA accreditation
Section Properties
Purlins
Eaves Beam
Cladding Rails
Multichannel
Sleeves
Stanchion stays
Stubs
Sustainability
Stantion Stays Capacities
T
Tiled Roofs
Tube Struts
V
Vertical Cladding
W
Window openings
19,30
87
8,64,96
31,85,121
12
2
32
59
86
122
9,17,28,72,82,118
84,120
84,121
8,50,64,96
125
14,22
11,21,29,76,83,119
67,98
102,109
139
Index
L
Load Tables
Toolkit
Design Software for
Structural Products
Toolkit now offers the opportunity to design a full roof solution due
to it's interactive link with CSC Fastrak, providing a quicker and
more efficient design.
140
Composite Slab
Case Study
Multideck Technical
Handbook
Kingspan Toolkit
Software