How long have you been working at Telcel? Do you have a visa to come to the US? What are your daily activities as a Sr. RF Optimization Engineer? In OSS, do you create scripts to create neighbour lists? You have all three technologies, 2g, 3g, LTE, do you do neighbours for all three? Which version of Netact are you working on now? Do you work on Nokia UMTS and GSM? Are you responsible for a cluster of sites? Do you handle all technologies in this area? How do you monitor performance? What type of presentation do you prepare to the manager and what does it look like? In the RNC, cluster level performance, how do you find worst offenders? And what do you do with them? Do you have remote electric tilt antennas? If you have a group of sites that have a high drop call rate on UMTS, what do you do to improve it? Do you think is a good thing to power down the BTS to improve performance? What tools do you use to analyse drive test data
Deepus Interview Question What is CS fallback what is lte PCI criteria explain cell re-selection which event triggers 4g-3g handover What is soft handover and hard handover what measurement used for handover how many hsdpa spreading factor how many hsdap ch what is hsdpa data rate what is RSSI & RSCP what is Lte UE measurement range, CQi, RSRP & RSRQ what measurement triggers handover what is 2g handover measurement Explain FSME concept in Nokia What is the limitation in baseband capacity in Nokia What do you do if you face code congestion What is the size of active set in your network? Explain LTE HOs How many type of HOs do we have in LTE? Do we have soft HOs in LTE? Explain type of HOs in HSDPA. Explain type of events in LTE Type of events in UMTS What is S1 interface? How do HOs happen in LTE? Can HOs happen if there is no X2 interface? What are the threshold parameters for handover. Explain type of events in LTE? What are the interfaces in LTE? Interface between Ue and eNodeB MIMO Parameter used for handover threshold in Huawei How are system information carried in LTE? What are the events 1a, 1b, 1c, etc.? Have you heard of event 2F or 2X or 2S (something like that. not sure. Couldn't hear properly and they said thats fine) When you say there is a pilot pollution and what is the value/threshold you use from KPI to detect it. what KPI's you generally monitor? Expalin what you have worked on in the past & how you approach problem solving in Optimization (HO failure/Pilot Pollution etc) Have you worked on PCI planning and selection? Explain RSRP, RSRQ, RSSI, SINR Explain events in LTE (A1,A2,A3,A5,B1,B2) What are the different modulation techniques? When do you use 64QAM modulation scheme? What is CQI and what is it used for? Explain LTE Architecture What are the diffrent interfaces in LTE? Explain S1 interface and X2 interface, what they facilitate Have you worked on OSS Ericsson tools? What is MIMO? CDMA and name some steps in CDMA modulation Types of HO in CDMA 16 & 64 QAM LTE events Open and Close loop Power control PRACH and PCI planning CSFB and related SIB MIMO Cell selection/reselection most common MO Shell commands RSRP, RSRQ, RSSI, CQI SD Dimensioning, SD blocking.