Laser cutting process we can guarantee the tolerances according to the following table. Dimensions from 0 to 300 mm : +! 0"0# mm Dimensions from 30$ to #00 mm: +!" 0"$0 mm 'utting (urr : ma) 0"&0 mm this means that all +ey points, such as slots width or holes they are within +!.#%" / 0 becouse this is affacted by many factors
Laser cutting process we can guarantee the tolerances according to the following table. Dimensions from 0 to 300 mm : +! 0"0# mm Dimensions from 30$ to #00 mm: +!" 0"$0 mm 'utting (urr : ma) 0"&0 mm this means that all +ey points, such as slots width or holes they are within +!.#%" / 0 becouse this is affacted by many factors
Laser cutting process we can guarantee the tolerances according to the following table. Dimensions from 0 to 300 mm : +! 0"0# mm Dimensions from 30$ to #00 mm: +!" 0"$0 mm 'utting (urr : ma) 0"&0 mm this means that all +ey points, such as slots width or holes they are within +!.#%" / 0 becouse this is affacted by many factors
Normally with laser cutting process we can guarantee the tolerances according to the following table :
Dimensions from 0 to 300 mm : +! 0"0# mm Dimensions from 30$ to #00 mm : +! 0"$0 mm Dimensions from #0$ to %00 mm : +! 0"$# mm Dimensions from %0$ to $&00 mm : +! 0"&0 mm
'utting (urr : ma) 0"0# mm
This means that all *+ey points, such as slots width or holes they are within +! 0"0# mm but of course we can not guarantee this on the o-erall dimension of .#%"/0 becouse this is affacted by many factors such as for e)ample the air temperature and humidity" 1s discussed during my -isit in Subotica we ha-e been manufacturing stator core laminations for 2 years and we ha-e ne-er encountered problems on the tolerances"
2. Delivery
3e could manufacture the requested quantity of 4ole 5aminations + Stator 'ore sheets within /!. wee+s from ordersamples appro-al" 6f course we could also agree partial deli-eries" 1s more than & months ha-e passed from our offer and the raw material is strongly increasing on the mar+et we might ha-e to rediscuss the unit prices when you will be ready to place the order"
3. Material TF181
1ttached you can find the data sheet from our supplier Thyssen7rupp" 8f you loo+ at page 3& you will find information about T9$%$ material"
8 hope e-erything is clear enough, 8 remain at your disposal for any further information you might request"