Professional Documents
Culture Documents
PROJECT 4
CONTINUOUS PROBABILITY DISTRIBUTIONS
E i
Engineering
i C
College,
ll
H
Hailil U
University,
i
it S
Saudi
di A
Arabia
bi
Project 4-1
Toyota mechanical parts
Report the Toyota cars case (project 2-2),
2-2) and:
1 - Determine the probability that the product
fall outside the specifications limits.
T=8Kgf/cm
LSL=7 Kgf/cm
USL=9Kgf/cm
2 - Discuss the results and comment on the
opportunities for improvement of the process.
Project 4-2
RM Concrete Processes
The compressive strength of samples of
concrete can be modeled by a normal
di t ib ti
distribution
with
ith a mean off 60 MPa
MP and
d a
standard deviation of 1 MPa.
(a) What is the probability that a samples
strength is less than 62.5 MPa?
(b) What is the probability that a sample
samples
s
strength is between 58.0 and 59.0 MPa?
(c) What strength is exceeded by 95% of
th samples?
the
l ?
Project 4-3
RM Concrete Processes
Take the data of the compressive strength
of the RMC35 (project 2-1); Assume that
h di
he
distribution
t ib ti can b
be modeled
d l db
by a normall
distribution.
From the data determine the mean and the
standard deviation and then determine:
(a) What is the probability that a samples
strength is less than 35 MPa?
(b) What is the probability that a samples
strength is between 40.0 and 50.0 MPa?
( ) What
(c)
Wh t strength
t
th is
i exceeded
d d b
by 95% off
the samples?
Project 4-4
Comparing 2 Processes
In a manufacturing plant there are two production lines
(processes); Samples of 60 parts from each line have been
drawn and the quality characteristic recorded. (Tables A
and
d B)
B).
The design specifications are : (1500.5) mm
(a) Compare between the two production lines (A) and (B):
Project 4-3
Comparing 2 Processes
Project 4-3
Comparing 2 Processes
Dr Mohamed AICHOUNI
http://faculty.uoh.edu.sa/m.aichouni/stat319/index-summer2012.htm
Email: m.aichouni@uoh.edu.sa