This document provides instructions for installing a cracked version of Mastercam X8 along with a USB emulator to allow the software to run without a physical security key. The instructions include installing Mastercam X8 files from a crack folder, running registry files to set up the USB emulator, and confirming the emulator's new devices are detected in the Device Manager.
This document provides instructions for installing a cracked version of Mastercam X8 along with a USB emulator to allow the software to run without a physical security key. The instructions include installing Mastercam X8 files from a crack folder, running registry files to set up the USB emulator, and confirming the emulator's new devices are detected in the Device Manager.
This document provides instructions for installing a cracked version of Mastercam X8 along with a USB emulator to allow the software to run without a physical security key. The instructions include installing Mastercam X8 files from a crack folder, running registry files to set up the USB emulator, and confirming the emulator's new devices are detected in the Device Manager.
If you already have got SSQ's USB-Emulator for Mastercam X4-X7 installed you do
not need to re-installed it (skip step 3).
1. Install MasterCAM X8 (v17.0.14947.0) Win64 2. Copy file all files and folders from "mcamX8" crack folder to <mastercam X8 p rogdir> (by default C:\Program Files\mcamX8\ ) and overwrite original ones 3. Install USB-Emulator ATTENTION! To install emulator you need Administrator rights! To install emulator for 64bit Win Vista or Win7 you need to boot computer in mof e F8 > "Disable Driver Signature Enforcement" Moreover you need to use boot mode F8 > "Disable Driver Signature Enforcement" a t every reboot of computer! 3.1. Copy folder "USB_Emul_Win32" to C: 3.2. Run (as Administrator) "mcam_X5_X7_hasp_SSQ.reg" for SIM Type > HASP setup or "mcam_X5_X7_nethasp_SSQ.reg" for SIM Type > NetHASP and confirm to add info in Windows Registry 3.3. Run ..\USB_Emul_Win32\install.bat and wait until system will find and inst all new devices If setup is succesfull you have to see new devices: Device Manager -> Universal Serial Bus controllers -> SafNet inc. HASP key Device Manager -> Universal Serial Bus controllers -> SafNet inc. USB key That's all Cracked by Team-SolidSQUAD (SSQ)