You are on page 1of 2

Specification for HPLC:

UV-VIS , Diode Array, RI, Detection with quaternary pump (up to 8000 psi),
Fraction Collector, in built degassing facility, Auto sampler tray (consisting of 10
x 10 nos. (Total = 100 nos.) Vials (capacity 1.5 ml) holding point and injection
needle by robotics for sample collection from vial) having specific columns for
detection of sugars ( Glucose, Sucrose, Galactose, Arabinose, xylose, Mannose ,
Fructose, Maltose, Lactose, Cellobiose), column specific for Coniferyl alcohol ,
Sinapyl alcohol, Coumaryl alcohol, furfurals, HMF, acetic acid, furan, columns for
other compound detection such as GFC exchange , cation and anion column ,
Hydrophobic column, C8, C18, G8 columns with auto sampler & gradient pump
with auto sampler and gradient pump. In each case, there is a guard column at
the entrance of main column. Pressure Range: 400 Bar, Wavelength Range: 190950nm. 400nm User list should be incorporate & how many system has been
installed till date (since last two years) in eastern zone of India. The whole set up
is operated through computer and software. Column temperature maintain
facility. Filtration system: syringe filter using nylon 6,6 membrane (0.2 m)

Agilent Technology 1200 series

http://nycomps.org/facilities/hplc/

https://www.google.co.in/search?
q=photo+of+agilent+technology+1200+series+hplc&rlz=1C2CHRB_enIN490IN4
91&tbm=isch&tbo=u&source=univ&sa=X&ei=dPDGUu6EDMi3rgevloHgBQ&ved
=0CDEQsAQ&biw=1366&bih=676

You might also like