Professional Documents
Culture Documents
150 Watts: LPQ150 Series
150 Watts: LPQ150 Series
150 Watts: LPQ150 Series
LPQ150 Series
Electrical Specs
Input
Input range
Frequency
Inrush current
Efficiency
EMI filter
Special Features
Environmental
Output
Maximum power
Adjustment range
Cross regulation
Hold-up time
Overload protection
Overvoltage protection
Power failure
Remote inhibit
Remote sense
Safety
VDE
UL
CSA
NEMKO
CB
CE
114
Logic Control
0805/EN60950 (IEC950)
UL1950
CSA 22.2-234 Level 3
EN 60950/EMKO-TUE
(74-sec) 203
Certificate and report
Mark (LVD)
rev 12.10.03
AMERICAS
EUROPE
ASIA
LPQ150 Series
Ordering Information
Model
Output
Minimum
Voltage
Load
Convection Cooling
Peak
Load1
Regulation2
Number
LPQ152
5V
12 V
-12 V
5-25 V
2A
.1 A
.1 A
0A
15 A
6A
2A
2.5 A
22 A
8A
2.5 A
3A
30 A
10 A
3A
3A
2%
3%
3%
3%
50 mV
120 mV
120 mV
240 mV, max.
LPQ153
5V
15 V
-15 V
5-25 V
2A
.1 A
.1 A
0A
15 A
4.8 A
1.6 A
2.5 A
22 A
6.4 A
2A
3A
30 A
8A
2.4 A
3A
2%
3%
3%
3%
50 mV
150 mV
150 mV
240 mV, max.
LPQ154
5V
12 V
-12 V
24 V
2A
.1 A
.1 A
.5 A
15 A
6A
2A
3.5 A
22 A
8A
2.5 A
4.5 A
30 A
10 A
3A
5A
2%
3%
3%
+10 / -5%
50 mV
120 mV
120 mV
240 mV
1.
2.
3.
4.
5.
Ripple
P/P (PARD)3
Peak current lasting <30 seconds with a maximum 10% duty cycle.
At 25C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges.
4th output adjustable 5-25 V factory set at 5 V.
Minimum loads are required.
SK3
LPQ152
INHIBIT -ve
INHIBIT +ve
+12 V
No Connection
COMMON
-SENSE
+SENSE
LPQ153
INHIBIT -ve
INHIBIT +ve
+15 V
No Connection
COMMON
-SENSE
+SENSE
LPQ154
INHIBIT -ve
INHIBIT +ve
+12 V
No Connection
COMMON
-SENSE
+SENSE
PIN 8
SK2 PIN 1,2
PIN 3,4,5
PIN 6
PIN 7
PIN 8
I SHARE
+12 V
COMMON
-12 V
POK
+5 V to +25 V (Float)
I SHARE
+15 V
COMMON
-15 V
POK
+5 V to +25 V (Float)
I SHARE
+12 V
COMMON
-12 V
POK
+24 V
PIN 9
SK3 TB-1
COMMON (Float)
COMMON
COMMON (Float)
COMMON
COMMON
COMMON
TB-2
SK4 PIN 1
PIN 3
PIN 5
+5 V
GROUND
LINE
NEUTRAL
+5 V
GROUND
LINE
NEUTRAL
+5 V
GROUND
LINE
NEUTRAL
Mating Connectors
(SK4) AC Input:
Molex 09-50-8051 (USA)
Molex 09-91-0500 (UK)
PINS: 08-58-0111
(SK2) Aux DC Output/Power fail:
Molex 09-50-8091 (USA)
Molex 09-91-0900 (UK)
PINS: 08-58-0111
(SK1) Remote sense/Remote inhibit:
Molex 51110-0851 (USA)
PINS: 503-94-8100
SK2
.5625
987654321
Connector
SK1 PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
SK1
8765
5V O/P ADJ
Pin Assignments
DO NOT ADJ
7.4
(188.0)
8.5
(216.0)
Notes
1. Specifications subject to change
without notice.
2. All dimensions in inches (mm),
tolerance is 0.02.
3. Specifications are for convection
rating at factory settings unless
otherwise stated.
4. Remote inhibit requires an external
5V @ 10mA to activate.
5. Mounting (6-32) maximum insertion
depth is 0.12.
6. Warranty: 2 year
7. Weight: 1.75 lb. / 0.80 kg
531
SK4
4.25
(108.0)
.875
(22.25)
.75 (19.0)
1.5
(38.1)
2.5
(63.5)
www.astecpower.com
115