The document discusses four engineering projects:
1. A feasibility study for dehydrating isopropyl alcohol via extractive distillation, membrane separation, or a hybrid system. Simulations showed the total annual cost and steam needs of the optimal design.
2. A revamp calculation to check if an existing reboiler could handle increased process flow. Simulation found it suitable with minor recommendations.
3. Revamp calculations for a cement plant that increased production while using existing equipment. Air preheater area was also increased by 50%.
4. Simulation of a 125 TPD cryogenic oxygen plant involving various unit operations from air compression to product handling. Whole plant simulation was performed in HYSYS along with basic engineering.
The document discusses four engineering projects:
1. A feasibility study for dehydrating isopropyl alcohol via extractive distillation, membrane separation, or a hybrid system. Simulations showed the total annual cost and steam needs of the optimal design.
2. A revamp calculation to check if an existing reboiler could handle increased process flow. Simulation found it suitable with minor recommendations.
3. Revamp calculations for a cement plant that increased production while using existing equipment. Air preheater area was also increased by 50%.
4. Simulation of a 125 TPD cryogenic oxygen plant involving various unit operations from air compression to product handling. Whole plant simulation was performed in HYSYS along with basic engineering.
The document discusses four engineering projects:
1. A feasibility study for dehydrating isopropyl alcohol via extractive distillation, membrane separation, or a hybrid system. Simulations showed the total annual cost and steam needs of the optimal design.
2. A revamp calculation to check if an existing reboiler could handle increased process flow. Simulation found it suitable with minor recommendations.
3. Revamp calculations for a cement plant that increased production while using existing equipment. Air preheater area was also increased by 50%.
4. Simulation of a 125 TPD cryogenic oxygen plant involving various unit operations from air compression to product handling. Whole plant simulation was performed in HYSYS along with basic engineering.
Simulation and basic engineering for Dehydration of IPA
Feasibility study for an isopropyl alcohol (IPA) dehydration unit via extractive distillation , membrane separation unit or a hybrid system ( combination of both ) was carried out and for that Simulation of Distillation route performed. The optimal design flow sheet of this complete process was established showing that the total annual cost and the needed steam cost of this design flow sheet is compared.
Thermosyphon Reboiler revamps Calculation.
This was a revamp job to check whether the existing reboiler is capable of handling increased process flow. The Simulation was performed on HTRI 6 and found suitable with small recommendation.
Revamp calculation for Cement plant Air-heater.
This Plant increased his production from 650TPD to 850TPD with existing equipment with equipment de-bottlenecking. Air-preheater area was also increased by 50%. Plant data collect by first law.
manually and calculations confirmed
Simulation of 125 TPD cryogenic oxygen plant.
This cryogenic air separation plant involves Air Compression,
Air Cooling (DCA and DSA), Contaminant Removal (PP Bed, both TSA and PSA Type), Cryogenic Heat Exchange (PHX), Distillation (Separation), Refrigeration Generation (Turbo expansion), and Product Handling (Storage&Compression). We did whole plant simulation in HYSYS and also generate Basic engineering package.
Barta - Et - Al - 2018 - Experimental Analysis and Design Improvements On Combined Viper Expansion Work Recovery Turbine and Flow Phase Separation Device in R410A
Fan Power Calculations Types of Motors & Their Efficiency. VFD Air Filters Types Chemistry of Absorption and Regeneration PHE & Air Fin Heat Exchanger Type of Ducting and Pressure Drop