Professional Documents
Culture Documents
via USB
for VHA Project
www.huawei.com
Procedure
The BTS automatically downloads the
software version (version.csp) and
data configuration file (TranCfg.INI),
and activates the software.
After the activation, the BTS resets.
Wait until the BTS reset is complete.
For details on the status of the LED on the
USB disk and the status of the RUN LED on
the GTMU in this process, see step 3
1.\\BTS3900 GSM\V100R012C00SP42.csp
2.\\BTS3900 GSM\Precfg.ini
3.\\BTS3900 GSM\SITENAME\TranCfg.INI
8. FAQ
In case of USB upgrade failure and
need to reset BBU, use the Reset
button of GTMU for BTS reset
instead of power switch reset.