Professional Documents
Culture Documents
Working principle
LKC-2 opens when the pressure below the valve plug exceeds the
pressure above the plug and the spring force.
The valve closes when pressure equalization has been achieved. A
higher counter pressure will press the valve plug against the seat.
Standard Design
The valve body is in two parts, assembled by means of a clamp ring
and hygienically sealed with a special seal ring. A guide disc and four
legs guide the spring loaded valve plug with an O-ring seal. LKC-2 has
welding ends for ISO or DIN connections.
Materials
Steel parts:
Connections
The valve is available with welding ends for tubes according to ISO
and DIN 11850.
.
Technical data
Required differential pressure for opening the valve when fitted in a
vertical pipe, as shown in fig. 3, is approx. 6 kPa (0.06 bar).
Max. product pressure: . . . . . . . . . . .1000 kPa (10 bar).
Max. temperature: . . . . . . . . . . . . . .140C (EPDM).
Min. temperature: . . . . . . . . . . . . . . .-10C.
Option
Product wetted seal rings of Nitrile (NBR) or Fluorinated rubber (FPM).
Ordering
Please state the following when ordering:
-
Size.
Steel grade, 1.4301 (304) or 1.4404 (316L).
Connections, if not welding ends.
Rubber grade if not EPDM.
Fig.1. Note!
For the diagram the following applies:
Medium: Water (20C).
Measurement: In accordance with VDI 2173.
Dimensions (mm)
Fig. 2. Dimensions.
Size
A
OD
ID
t
H
Weight (kg)
25
mm
62.5
25.4
22.5
1.45
72.0
0.5
38
mm
75.0
38.4
35.5
1.45
85.5
0.7
51
mm
87.5
51.4
48.5
1.45
99
1.0
63.5
mm
95.0
63.9
60.5
1.7
127
1.7
76.1
mm
115
76.4
72.0
2.2
138
2.4
101.6
mm
155
102
97.6
2.2
164
4.3
DN
25
62.5
30.0
26.0
2
72.0
0.5
DN
32
75.0
36.0
32.0
2
85.5
0.7
DN
40
75.0
42.0
38.0
2
85.5
0.7
DN
50
87.5
54.0
50.0
2
99
1.0
DN
65
95.0
70.0
66.0
2
127
1.7
DN
80
115
85.0
81.0
2
138
2.4
DN
100
155
104
100
2
164
4.3
ESE00294EN 1001