Professional Documents
Culture Documents
Kyocera FS-4020: Easy To Remanufacture Cartridge Instructions
Kyocera FS-4020: Easy To Remanufacture Cartridge Instructions
www.uninetimaging.com
2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
REMANUFACTURING THE
KYOCERA FS-4020 TONER CARTRIDGE
By Mike Josiah and the Technical Staff at UniNet
The Kyocera FS-4020 cartridges are rated for 20,000 pages. The OEM number is TK-360, 362, 364 (depending on your region).
There is a chip used on this cartridge that must be replaced each cycle. The chips are regional so make sure you have the
correct one!
2. Make sure the toner port is closed. If open, close the port by
turning a tab on the gear with a screwdriver.
www.uninetimaging.com
2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
3. Fill the cartridge with toner for use in the TK-360 series of
cartridges. Use a Samsung CLP-300 seal to cover the hole
you drilled.
www.uninetimaging.com
2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com