Professional Documents
Culture Documents
208
,00
150
,00
ø81
,00
204
0
3,0
ø28
,00
188
FANE EN1201
12” 2-WAY ENCLOSURE
WWW.FANE-INTERNATIONAL.COM
FANE EN1201
12” 2-WAY ENCLOSURE
300,00
208,00
15,00
68,50
150,00
68,50
146,00
630,00
188,00
ø283,00
185,00
170,00
173,80 °
,00
147
166,17
05
49
9,
15
8,
14
78
,00
120,00
45,
00°
°
300,00
326,70
319,05
368,00
,00
135
80,00
168,41
150,22
150,22
10
2,0
0°
°
,00
78
61,64
281,14
290,00
281,14
25,00
MODEL
1.0 1:1 mm Tolerance Linear +/- 0.4, Holes +0.1/-0.0, None - Cumulative
MATERIAL / FINISH
Unspecified material. 15mm Birch Plywood, Baffle 18mm MDF
THE PROFESSIONAL SERIES
SOVEREIGN PRO 12-500
BASS DRIVER
The Sovereign Pro 12-500 is intended for use in two-way ported enclosures. The driver • Deep bass, good midrange with extended frequency range.
features a rugged die cast chassis combined with long throw motor system and high
+80
Usable Frequency Range -6dB 45 Hz - 4.5 kHz Qts 0.314
Vas Ltr
+70
Sensitivity (1 w - 1 m) 97.5 dB 107 litres
+60
Vd litres 0.339 litres
Moving Mass inc. Air Load 43 grams
+50 CMS (mm/N) 0.236 mm/N
20 50 100 200 500 1k 2k 5k 10k 20k Minimum Impedance Zmin 6.84 Ω
Hz BL T/m 16 T/m
* Half space response measured in a 975 litre sealed box. Effective Piston Diameter 10.31” / 261.87 mm
Mms (grms) 58 grams
IMPEDANCE Peak Displacement Volume of Cone Vd 0.339 litres
Xmax (mm) 6 mm
200
Magnet Weight 80 oz
100 Sd (cm2) 565 cm2
Magnetic Gap Depth 0.39” / 10 mm
Efficiency % 2.34%
Flux Density
50
1.1 Tesla
Le (1k Hz) 1.6 mH
20
Coil Winding Height 0.70” / 18 mm
Ohms
10
Voice Coil Diameter 3.0” / 76.2 mm
5
7.08” / 190 mm
• Please enquire about alternative impedances.
5.7” / 145 mm
N/A
• A.E.S. power handling test. Pink noise bandpass filtered at 12 dB per octave with cutoff frequencies of 45 Hz and 450 Hz. Driver mounted in
free air, test signal applied at rated power for two hours.
• Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency
performance which may be achieved in a fully optimised system.
THE HIGH FREQUENCY DEVICES SERIES
CD-150
COMPRESSION DRIVER
The CD150 is an excellent choice for professionals who are looking to achieve high • 1” exit ferrite magnet compression driver.
sound pressure level performance and clarity of sound. The unit combines high BL
• 1.75” / 43mm copper clad aluminium voice coil.
100
+110
| CD-150
50
+100
+90 20
Ohms
dBr
+80 10
+70 5
+60 2
+50 1
300 500 1k 2k 5k 10k 20k 20 50 100 200 500 1k 2k 5k 10k 20k
Hz Hz
Sensitivity (1 w - 1 m) 106 dB Shipping Weight 6.8 lb / 3.1 kg Surround / Edge Termination Double Sinusoidal Roll Titanium
Usable Frequency Range -6dB 2 kHz - 18 kHz Packing Carton Dimensions 150 x 160 x 180 mm Magnet Material Ferrite
Recommended Crossover Frequency Bolt Fixing Hole Dimensions Connectors 4.8 mm Spade
2x M6 on 72.2 mm - 3” PCD
3.5 kHz & Qty
Filtered at 18dB / Octave Positive voltage at red/ positive
Polarity terminal causes positive pressure
Effective Diaphragm Diameter 1.75” / 44 mm at throat exit
ELH-003
• Eliptic Horn Nominal Directivity
80° x 60°
• Loading down to1000 Hz
• Strong Glass Fibre material
• Perfectly Controlled Dispersion
dB SPL
100