You are on page 1of 12

HP Printers: Cold Reset and Configuration Pages

Black-and-white
LaserJet 4, 5m
Cold reset
Turn printer off.
Hold down both Go and Online buttons.
(for LJ5, hold only Go button)
Turn printer on.
Release buttons when display shows COLD RESET.
Self-test/configuration (please wait at least five minutes after cold reset!)
Press Menu button until TEST MENU is displayed
Press Item button until PRINT SELF TEST is displayed
Press Go button
LaserJet P1000/P1500, 1160/1320 series
Cold reset
Turn printer off
Hold down Go button
Turn printer on
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press Go button for 5 seconds
LaserJet 1200
Network Report
Press TEST button on external print server
LaserJet 1300
Cold reset
Turn printer off
Hold down Go button
Turn printer on
Continue to hold the Go button for at least 5 seconds, but no more than 15
Release the Go button
If at first you dont succeed, try again, holding for a wee bit more or less time
Configuration page (print server) (please wait at least five minutes after cold reset!)
On the back side of the printer where the network cable plugs in, press the
little button above the cable.

LaserJet 1320
Cold reset
Turn printer off
Hold down reset button on the back of the printer
Turn printer on
Keep the reset button down until the printer shows Ready (steady green),
then release
Configuration page (please wait at least five minutes after cold reset!)
When printer is Ready and not printing, press and hold Go button for 5
seconds.
LaserJet 1505
Cold reset
Turn printer off
Hold Go button
Turn printer on
After all lights turn on, hold Go button for a count of 6
The Attention light will turn off during this time
Release Go button
If at first you dont succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
Press the Go button when the printer is idle.
LaserJet 1522 mfp
Cold reset
Network configuration (please wait at least five minutes after cold reset!)
Press Setup button
Use arrow keys to highlight Reports, then press OK
Use arrow keys to highlight Network Report, then press OK
LaserJet P2015
Cold reset
Turn printer off
Hold down Go/green button
Turn printer on
Continue to hold the Go/green button down for at least 5 seconds, no more than
15 seconds. When the Attention light goes on, you can let go.
If at first you dont succeed, try again, holding for a wee bit more or less time
Alternate network reset
Turn printer off

Hold down Go/green and Cancel/red buttons simultaneously


Turn printer on
Continue to hold buttons down for at least 10 seconds, but no more than 20
seconds. When the Attention/triangle light goes on, let go.
If at first you dont succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press Go/green button for 5
seconds
If at first you dont succeed, try again, holding for a wee bit more or less time
LaserJet 2100
Cold reset
Turn printer off
Hold Job Cancel button
Turn printer on
When all LEDS light, release button
If at first you dont succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press and release Go and Job
Cancel buttons simultaneously
LaserJet 2200
Cold reset
Turn printer off
Hold Go button
Turn printer on
When ATTENTION light turns on, release button
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press and release Go and Job
Cancel buttons simultaneously
LaserJet 2300, 2400
LaserJet 4200/4300 series
LaserJet 9000 series
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark/OK button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET

Press Checkmark/OK button


Configuration page (please wait at least five minutes after cold reset!)
Press Checkmark/OK button
Use the arrow keys until display shows INFORMATION
Press Checkmark/OK button
Use the arrow keys until display shows PRINT CONFIGURATION
Press Checkmark/OK button
LaserJet P2055
Cold reset
Press OK
Use the arrow keys until SERVICE appears in the display
Press OK
Use the arrow keys until RESTORE DEFAULTS appears in the display
Press OK
Network page (please wait at least five minutes after cold reset!)
Press OK
Use the arrow keys until REPORTS appears in the display
Press OK
Use the arrow keys until NETWORK REPORTS appears in the display
Press OK
LaserJet P3005, P4010/P4510 series
LaserJet 5200 series
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark/OK button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark/OK button
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button
Press down arrow until INFORMATION is highlighted
Press OK button
Press down arrow until PRINT CONFIGURATION is highlighted
Press OK button
LaserJet P3010 series
Cold reset

Turn printer off


Turn printer on
When display shows rapidly changing numbers, hold Checkmark/OK button
When all lights turn on, release button (it may take up to 10 seconds)
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark/OK button
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button
Press down arrow until INFORMATION is highlighted
Press OK button
Press down arrow until PRINT CONFIGURATION is highlighted
Press OK button
LaserJet 4000, 4050, 4100
LaserJet 5000/5100 series
LaserJet 8000/8100 series
Cold reset
Turn printer off
Hold Green button
Turn printer on
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button until display shows INFORMATION MENU
Press Item button until display shows PRINT CONFIGURATION
Press Select button

Color
Color LaserJet 1500, 2500 series
Cold reset
Turn printer off
Hold Go button
Turn printer on
After all lights turn on, hold Go button for a count of 6
The Attention light will turn off during this time
Release Go button
If at first you dont succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is ready and not printing, press Go and Job Cancel buttons
simultaneously.

Color LaserJet 1600


Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press arrow buttons until display shows REPORTS
Press Checkmark button
Press arrow button until display shows CONFIG REPORT
Press Checkmark button
Color LaserJet 2550
Cold Reset
Configuration page (please wait at least five minutes after cold reset or power on!)
When printer is not printing and ready, briefly press the Go and Cancel Job
buttons simultaneously
Color LaserJet 2600 series
Cold reset
Press arrow buttons until display shows SERVICE
Press Checkmark button
Press arrow buttons until display shows RESTORE DEFAULTS
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press arrow buttons until display shows REPORTS
Press Checkmark button
Press arrow buttons until display shows CONFIG REPORT
Press Checkmark button
Color LaserJet 2700 series
Cold reset
Press arrow buttons until display shows NETWORK CONFIG
Press OK button
Press arrow buttons until display shows RESTORE DEFAULTS
Press OK button
Network page (please wait at least five minutes after cold reset!)
Press arrow buttons until display shows REPORTS

Press OK button
Press arrow buttons until display shows NETWORK REPORT
Press OK button
Color LaserJet 3000/3600/3800 series
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button
Press arrow buttons until INFORMATION is highlighted
Press Checkmark button
Press arrow buttons until PRINT CONFIGURATION is highlighted
Press Checkmark button
Color LaserJet 4500/4550 series, 8500, 8550
Cold reset
Turn power off
Hold down Go button
Turn printer on
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button until display shows INFORMATION MENU
Press Item button until display shows PRINT CONFIGURATION
Press Select button
Color LaserJet 4600
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark/OK button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark/OK button
Configuration page (please wait at least five minutes after cold reset!)
Press Checkmark/OK button

Use the arrow keys until display shows INFORMATION


Press Checkmark/OK button
Use the arrow keys until display shows PRINT CONFIGURATION
Press Checkmark/OK button
Color LaserJet 4610/4650, 5550
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Menu button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button
Use the arrow keys until display shows INFORMATION
Press Checkmark button
Use the arrow keys until display shows PRINT CONFIGURATION
Press Checkmark button
Color LaserJet 4700, 5500, 9500
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark/OK button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark/OK button
Configuration page (please wait at least five minutes after cold reset!)
Press Checkmark/OK button
Use the arrow keys until display shows INFORMATION
Press Checkmark/OK button
Use the arrow keys until display shows PRINT CONFIGURATION
Press Checkmark/OK button
Color LaserJet CM2320
Cold reset
Turn printer off
Hold down the right arrow button and Cancel button

Turn printer on
When PERMANENT STORAGE INIT. shows on display, release buttons
Network report (please wait at least five minutes after cold reset!)
Press the Setup button
Use the arrow keys until the display shows REPORTS
Press OK
Use arrow keys until display shows NETWORK REPORT
Press OK
Color LaserJet CP1210
Cold reset on this model, can only be done from a connected computer
Open HP Color LaserJet CP1210 Series Toolbox
Click Device Settings folder
Click Service page
Click Restore
Configuration page (please wait at least five minutes after cold reset!)
When the printer is not busy, hold Resume button for a few seconds
Color LaserJet CP1015, CP2020
Cold reset
Press OK button
Press arrow buttons until display shows NETWORK CONFIG
Press OK button
Press arrow buttons until display shows RESTORE DEFAULTS
Press OK button
Network page (please wait at least five minutes after cold reset!)
Press OK button
Press arrow buttons until display shows REPORTS
Press OK button
Press arrow buttons until display shows NETWORK REPORT
Press OK button
Color LaserJet CP1510 series
Network reset
Press OK button
Press arrow buttons until display shows NETWORK CONFIG
Press OK button
Press arrow buttons until display shows RESTORE DEFAULTS
Press OK button
Network report
Press OK button

Press arrow buttons until display shows REPORTS


Press OK button
Press arrow buttons until display shows NETWORK REPORT
Press OK button
Color LaserJet CP3505, CP3520 series, CP4005
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press Menu button
Use the arrow keys until display shows INFORMATION
Press Checkmark button
Use the arrow keys until display shows PRINT CONFIGURATION
Press Checkmark button
Color LaserJet CP4020/4520 series
Cold reset
Configuration page (please wait at least ten minutes after cold reset!)
Press Home button
Use the arrow keys until display shows INFORMATION
Press OK button
Use the arrow keys until display shows PRINT CONFIGURATION
Press OK button

OfficeJet
OfficeJet 6500 series
Network page (please wait at least five minutes after completing reset)
Press Setup button
Press arrow buttons until PRINT REPORT is highlighted
Press OK button
Press arrow buttons until NETWORK SETTINGS is highlighted
Press OK button
OfficeJet 7x00 series

Setting to DHCP this model does not support cold reset


Press Setup button
Press arrow buttons until display shows NETWORK
Press OK button
Press arrow buttons until display shows ADVANCED SETUP
Press OK button
Press arrow buttons until display shows IP SETTINGS
Press OK button
Press arrow buttons until display shows AUTOMATIC IP SETTINGS
Press OK button
Network page (please wait at least five minutes after completing above!)
Press Setup button
Press arrow buttons until display shows NETWORK
Press OK button
Press arrow buttons until display shows VIEW NETWORK SETTINGS
Press OK button
Press arrow buttons until display shows PRINT NETWORK
CONFIGURATION PAGE
Press OK button

PhotoSmart
PhotoSmart 32xx series
Viewing network settings
Press Setup button
Press down arrow until NETWORK highlighted
Press OK
Press 1
Press 2
Printing network settings
Press Setup button
Press down arrow until NETWORK highlighted
Press OK
Press 1
Press 1
PhotoSmart 72xx series
Printing network settings
Press Setup button
Press down arrow until display shows NETWORK highlighted
Press OK button

Press down arrow until VIEW NETWORK SETTINGS is highlighted


Press OK button
Press down arrow until PRINT NETWORK SETTINGS is highlighted
Press OK button

You might also like