Professional Documents
Culture Documents
Sdh-Seh: Swimming Pool Dehumidifiers
Sdh-Seh: Swimming Pool Dehumidifiers
SDH-SEH
SERIES
TECHNICAL MANUAL
MTSDH_SEHGB
REV.072008
MTSDH_SEHGB
REV.072008
MTSDH_SEHGB
REV.072008
MTSDH_SEHGB
page 3
page 6
page 6
page 6
page 7
page 7
page 8
page 8
page 8
page 9
page 11
page 12
page 16
page 17
page 18
page 18
page 19
page 19
page 19
page 19
page 19
page 20
page 21
page 21
page 22
page 23
page 23
page 23
page 24
page 25
page 25
page 26
page 27
page 27
page 27
page 28
page 28
page 28
page 28
page 29
page 30
page 49
REV.072008
Indicates important information that the operator must follow in order to guarantee the correct operation
of the equipment in complete safety
MTSDH_SEHGB
REV.072008
Its strictly forbidden to remove and/or camper with any safety device.
Any routine or not-routine maintenance operation shall be carried out when the equipment has been shut
down, disconnected from electric and pneumatic power source and after its pneumatic system has been
discharged.
Do not put your hands or insert screwdrivers, spanners or other tools into moving parts of the equipment.
The equipment supervisor and the maintenance man must receive training suitable for the performance of
their tasks in safety
Operators must know how to use personal protective devices and must know the accident-prevention
guidelines contained in national and international laws and norms.
MTSDH_SEHGB
REV.072008
Using components, expendable materials or spare parts that do not correspond to those recommended
by the manufacturer and/or listed in this manual may be dangerous for the operators and/or damage the
equipment
The operators workplace must be kept clean, tidy and free from objects that may camper free
movements. Appropriate lighting of the work place shall be provided so as to allow the operator to carry
out the required operations safely. Poor or too strong lighting can cause risks.
Ensure that work places are always adequately ventilated and that aspirators are working, in good
condition and in compliance with the requirements of the laws in force...
PERSONAL PROTECTIVE EQUIPMENT
When operating and maintaining the SDH-SEH unit, use the following personal protective equipment.
Equipment: people who make maintenance or work with the unit, must wear an equipment in accordance
with the safety Directives. They must wear accident prevention shoes with anti-slip sole where the paving
is slippery.
Gloves: During the cleanings and the maintenance operations, its necessary the use of appropriate
gloves. In case of gas recharge, its compulsory the use of appropriate gloves to avoid the risk of
freezing.
Mask and googles: Respiratory protection (mask) and eye protection (goggles) should be
used during cleaning and maintenance operations.
SAFETY SIGNS
The equipment features the following safety signs, which must be complied with:
General hazard
MTSDH_SEHGB
REV.072008
MTSDH_SEHGB
REV.072008
OTHER VERSIONS
Low noise version (LS)
The low noise version LS is supplied with compressors jacket and complete acoustic insulation of the
compressor vane with high density sound absorption material.
ACCESSORIES
MTSDH_SEHGB
10
REV.072008
Mod.
SEH
100
120
160
200
Refrigerant gas
Dehumidification capacity (1)
Dehumidification capacity (2)
Nominal input power (1)
l/24h
l/24h
kW
R407C
93,7
61,2
1,7
R407C
124,
81,9
2,2
R407C
164,3
107,8
2,6
R407C
194,1
127,5
3
kW
l/h
kPa
8,6
750
17
8,6
750
17
11,2
980
15
14,1
1220
22
kW
l/h
kPa
1,35
230
30
1,35
230
30
2,0
345
30
2,6
400
40
A
A
V/Ph/Hz
8,5
11,3
5,9
7,6
m3/s
Pa
0,277
200
0,333
200
0,388
180
0,528
180
type
n
n
rotative
1
1
1
rotative
1
1
1
scroll
1
1
1
scroll
1
1
1
dB(A)
dB(A)
68
61
69
62
70
63
71
64
mm
mm
mm
Kg
800
570
850
133
800
570
850
147
800
570
1750
159
800
570
1750
169
230/1/50
400/3+N/50
MTSDH_SEHGB
11
REV.072008
Room
temperature
SDH 100
PERFORMANCE TABLES
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
11,8
16,4
24,0
34,6
44,9
53,9
0,9
1,0
1,1
1,3
1,4
1,5
3,7
4,4
5,4
6,7
8,0
9,1
1,4
1,6
2,0
2,4
2,8
3,2
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
16,5
24,4
33,8
47,6
61,2
72,6
0,9
1,1
1,2
1,3
1,4
1,6
4,2
5,2
6,4
7,9
9,5
10,9
1,6
1,9
2,3
2,8
3,4
3,8
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
Temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
21,3
32,2
45,1
59,8
76,6
87,3
1,0
1,1
1,2
1,3
1,5
1,6
4,7
6,0
7,4
9,1
11,0
12,3
1,7
2,2
2,7
3,2
3,8
4,3
Room
Temperature
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
27,8
40,5
56,6
73,3
93,7
105,3
NOTE:
5,3
6,8
8,5
10,3
12,5
14,0
1,9
2,4
3,0
3,6
4,4
4,9
MTSDH_SEHGB
12
REV.072008
Room
temperature
SDH 120
PERFORMANCE TABLES
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
16,5
23,1
33,6
47,5
60,4
71,7
1,1
1,3
1,5
1,7
1,9
2,0
4,0
4,9
6,1
7,6
9,0
10,2
1,7
2,1
2,6
3,2
3,7
4,2
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
23,2
34,4
47,0
64,9
81,9
96,1
1,2
1,4
1,6
1,7
1,9
2,1
4,6
5,9
7,2
8,9
10,6
12,0
2,0
2,5
3,0
3,7
4,4
5,0
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
Temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
30,1
45,1
62,4
81,1
101,9
115,1
1,2
1,4
1,6
1,8
2,0
2,2
5,2
6,8
8,4
10,2
12,2
13,5
2,2
2,9
3,5
4,2
5,0
5,6
Room
Temperature
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
39,2
56,6
77,8
98,8
124,0
138,2
NOTE:
5,9
7,7
9,6
11,5
12,8
15,3
2,5
3,2
4,0
4,8
5,7
6,3
MTSDH_SEHGB
13
REV.072008
Room
temperature
SEH 160
PERFORMANCE TABLES
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
21,4
29,5
43,0
61,6
79,2
94,4
1,3
1,5
1,7
1,9
2,2
2,5
4,1
4,9
6,1
7,8
9,5
11,0
2,1
2,5
3,0
3,8
4,6
5,3
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
29,9
43,8
60,3
84,4
107,8
126,8
1,3
1,5
1,7
2,0
2,2
2,5
4,7
5,9
7,3
9,3
11,3
13,1
2,4
2,9
3,6
4,5
5,5
6,3
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
Temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
38,5
57,5
80,3
105,8
134,6
151,9
1,4
1,6
1,8
2,0
2,3
2,6
5,3
6,8
8,7
10,8
13,1
14,8
2,6
3,4
4,2
5,2
6,4
7,1
Room
Temperature
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
50,1
72,2
100,4
129,5
164,3
182,9
NOTE:
6,1
7,8
10,0
12,3
15,1
16,8
3,0
3,8
4,9
5,9
7,3
8,1
MTSDH_SEHGB
14
REV.072008
Room
temperature
SEH 200
PERFORMANCE TABLES
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
25,3
34,9
50,9
72,9
93,8
111,9
1,5
1,7
1,9
2,2
2,5
2,8
3,4
4,2
5,2
6,7
8,1
9,4
2,4
2,9
3,6
4,5
5,4
6,3
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
35,3
51,8
71,4
99,9
127,5
150,1
1,5
1,7
1,9
2,2
2,6
2,9
3,9
5,0
6,2
8,0
9,7
11,2
2,8
3,5
4,2
5,3
6,5
7,4
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
Room
Temperature
Dehumidification capacity
10C
15C
20C
25C
30C
35C
45,6
68,1
95,1
125,2
159,1
179,8
1,6
1,8
2,0
2,3
2,6
3,0
4,5
5,8
7,4
9,2
11,3
12,7
3,1
4,0
5,0
6,2
7,5
8,4
Room
Temperature
Dehumidification capacity
Input power
Heating capacity
[l/24h]
[kW]
[C]
[kW]
10C
15C
20C
25C
30C
35C
59,2
85,4
118,7
153,0
194,1
216,3
NOTE:
5,2
6,7
8,6
10,6
12,9
14,5
3,5
4,5
5,7
7,0
8,5
9,5
MTSDH_SEHGB
15
REV.072008
100
120
160
200
kW
8,6
8,6
11,2
14,1
Waterflow
l/h
230
230
345
400
kPa
17
17
15
22
Nominal data are referred to room temperature 32C and water temperature 80/70C .
1,5
1,4
1,3
1,2
1,1
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
20
25
30
35
40
45
50
55
60
65
70
The hot water coil capacity in different conditions can be obtained multiplying the nominal capacity (See above), by the correction
factor indicated in the table.
Water pressure drops
kPa
30
25
SDH 100-120
20
15
SEH 160-200
10
5
0
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
Waterflow l/h
MTSDH_SEHGB
16
REV.072008
120
160
200
Mod.
kW
1,35
1,35
2,0
2,6
Water flow
l/h
230
230
345
400
kPa
30
30
30
40
The nominal value refers to an ambient temperature of 30C and outlet water temperature of 32C (Dt 5C).
The heat recovery capacity in different conditions can be obtained multiplying the nominal capacity (See above), by the correction
factor indicated in the table.
1,2
1,1
1
0,9
0,8
0,7
0,6
0,5
30
32
34
36
38
40
42
Outlet water temperature C
44
46
48
50
SDH 100-120
25
20
SEH 160-200
15
10
5
0
100
200
300
400
500
MTSDH_SEHGB
17
REV.072008
90%
80%
Standard operation
70%
60%
50%
40%
30%
0
10
20
30
40
SOUND DATA
SOUND LEVELS STANDARD VERSION
(Hz)
Mod.
100
120
160
200
63
dB
82,1
83,1
84,1
85,1
125
dB
73,3
74,3
75,3
76,3
250
dB
67,2
68,2
69,2
70,2
500
dB
65,7
66,7
67,7
68,7
Lw
1K
dB
64,6
65,6
66,6
67,6
2K
dB
59,2
60,2
61,2
62,2
4K
dB
55,8
56,8
57,8
58,8
8K
dB
46,7
47,7
48,7
49,7
Lp
dB
dB(A)
dB(A)
82,9
83,9
84,9
85,9
69
70
71
72
61
62
63
64
63
dB
80,6
81,6
82,6
83,6
125
dB
71,8
72,8
73,8
74,8
250
dB
65,7
66,7
67,7
68,7
500
dB
64,2
65,2
66,2
67,2
Lw
1K
dB
63,1
64,1
65,1
66,1
2K
dB
57,7
58,7
59,7
60,7
4K
dB
54,3
55,3
56,3
57,3
8K
dB
45,2
46,2
47,2
48,2
Lp
dB
dB(A)
dB(A)
81,4
82,4
83,4
84,4
67,5
68,5
69,5
70,5
59,5
60,5
61,5
62,5
MTSDH_SEHGB
18
REV.072008
Set-point
Differential
Reset
Antifreeze thermostat
MANUAL
Bar
28
7,7
MANUAL
Bar
0,7
AUTOMATIC
ELECTRIC DATA
SDH 100-120
Power supply
V/~/Hz
230/ 1 / 50
Control circuit
V/~/Hz
24 / 1 / 50
Auxiliary circuit
V/~/Hz
230 / 1 / 50
Fans
V/~/Hz
230/1/ 50
Power supply
V/~/Hz
400/ 3+N / 50
Auxiliary circuit
V/~/Hz
230 / 1 / 50
SEH 160-200
Control circuit
V/~/Hz
24 / 1 / 50
Fans
V/~/Hz
230 / 1 / 50
INSPECTION
When installing or servicing the unit, it is necessary to strictly follow the rules reported on this manual, to conform to all the
specifications of the labels on the unit, and to take any possible precautions of the case. Not observing the rules reported on this
manual can create dangerous situations. After receiving the unit, immediately check its integrity. The unit left the factory in perfect
condition; any eventual damage must be questioned to the carrier and recorded on the Delivery Note before it is signed. HIDROS
must be informed, within 8 days, of the extent of the damage. The Customer should prepare a written statement of any severe
damage.
MTSDH_SEHGB
19
REV.072008
Mod
100
120
160
200
A
800
800
800
800
B
0
0
0
0
C
1000
1000
1000
1000
D
0
0
0
0
E
1000
1000
1500
1500
WARNING: The unit should be installed so that maintenance and/or repair services be possible. The
warranty does not cover costs due to lifting apparatus, platforms or other lifting systems required by the
warranty interventions
WARNING: All the maintenance operation must be done by TRAINED PEOPLE only.
WARNING: Before every operation of servicing on the unit, be sure that the electric supply is
disconnected.
WARNING: Inside the unit some moving components are present. Be very careful when operating in their
surroundings even if the electric supply is disconnected.
WARNING: The top shell and discharge line of compressor are usually at high temperature level. Be very
careful when operating in their surroundings.
WARNING: Aluminium coil fins are very sharp and can cause serious wounds. Be very careful when
operating in their surroundings.
WARNING: After servicing operation close the unit with cover panels, fixing them with locking screws.
MTSDH_SEHGB
20
REV.072008
SEH
DUCT CONNECTIONS
All the units are provided with a centrifugal fan that can
be ducted. If supply only should be ducted, a flanged
connection with overall dimensions larger than discharge
hole located on the top of the unit should be used
(please refer to unit dimensional drawing). In case also
the suction side should be ducted it is necessary to order
the accessory air filter frame for ducted installation in
order to connect the return duct with a flange having the
same dimensions of the filter frame (See next pictures).
WARNING: In case of ducted installations it is very important to check that the airflow is close to the
nominal value with a maximum tolerance of +/-15%. Airflow outside these limits can compromise the
correct operation.
WARNING: When ductworks are connected it is IMPORTANT to check if the airspeed through the
evaporator is around 1,5 2 m/s. This parameter allow the unit to operate with the maximum efficiency;
so an airspeed over than 2 m/s should never been exceeded.
MTSDH_SEHGB
21
REV.072008
SDH UNITS
SEH UNITS
The SEH units can be supplied, upon request , with the air
filter frame for ducted installation (FARC). IN this case the filter
is G3 efficiency, removable laterally by sliding the cells after
opening of the fixing knobsw.
MTSDH_SEHGB
22
REV.072008
MTSDH_SEHGB
23
REV.072008
CND
CH
CPL
EV
SHP
EXV
Condenser
Charging plug
Expansion capillary tube
Evaporator
High pressure switch
Termostatic valve
MTSDH_SEHGB
FL
MC
MFC
YBP
SLP
DSP
24
REV.072008
WARNING: The line voltage fluctuations can not be more than 5% of the nominal value, while the voltage
unbalance between one phase and another can not exceed 2%. If those tolerances should not be
respected, please contact our Company.
WARNING: Electric supply must be in the limits shown: in the opposite case warranty will terminate
immediately. Before every operation on the electric section, be sure that the electric supply is
disconnected.
Before start-up
Check that all power cables are properly connected and all terminals are hardly fixed.
Check that there is not any refrigerant leakage.
Check that all water connections are properly installed and all indications on unit labels are observed.
Before proceeding to start up check that all the cover panels are in the proper position and locked with fastening screws.
START UP
All the units are provided with microprocessor control that manages all the various functions of the unit. The functions described
below are applied both for local board control and remote panel control.
To start the unit turn the main switch ON (the inner led will light up). Activate humidity switch by rotating the knob o by pressing the
instrument keyboard depending on the type of instrument installed. At this point the fan will be started as well as the compressor
after a certain delay time.
If the unit does not start
Check if the humidity probe is set properly.
WARNING: Never modify internal wiring connections; warranty will be invalidated.
MTSDH_SEHGB
25
REV.072008
Units are provided with signalling lighting leds that indicates unit operational status. Below is reported a brief description of their
meaning.
Alarm led (red): indicates the unit alarm status according to the following meanings:
red led ON: high pressure alarm;
red led blinking: low pressure alarm;
red led and compressor led ON: compressor thermal overload alarm;
red led and defrost led blinking: maximum defrost cycle time overcome;
Defrost led (yellow): indicates that the units is executing the defrost cycle;
led fastly blinking: execution of drop cycle at the defrost end;
Dehumidification led (green): indicates that the control is requiring dehumidification operating mode;
Electrical supply (green): indicates that green switch has been turned in On position and the unit is
electrically supplied with the following meanings:
Led on: unit is working;
led blinking slowly: Unit in stand-by; Remote On/Off from switch opened.
Heating led (green): it indicates that the control is requiring the heating mode (only with water coil option)
Compressor led (green): indicates compressor status with the following meanings:
led ON: compressor running;
led blinking: compressor ready to start;
MTSDH_SEHGB
26
REV.072008
MTSDH_SEHGB
27
REV.072008
ENVIRONMENT PROTECTION
According to European norms dealing with the use of depleting stratospheric ozone substances, it is forbidden to release
refrigerants fluids in the atmosphere. They must be redelivered to the seller or to proper gathering points at the end of their
operating life. Refrigerant R407C is mentioned among controlled substances and for this reason it must be subjected to said norms.
A particular care is recommended during service operations in order to reduce as much as possible any refrigerant loss.
MTSDH_SEHGB
28
REV.072008
PROBLEM
ACTIVATED LED
None
Any led
Fan starts, compressor does
not start; alarm red led is
blinking.
MTSDH_SEHGB
29
POSSIBLE CAUSE
CORRECTIVE ACTION
REV.072008
MTSDH_SEHGB
30
REV.072008
HIDROS srl
Via dellIndustria 5
35020 Brugine (Pd)
Tel.+390-49-9731022
Fax.+390-49-5806928
Info@hidros.it
www.hidros.it
Technical data shown in this booklet are not binding.
HIDROS SRL shall have the right to introduce at any time whatever modifications necessary to the improvement of the product.