You are on page 1of 1

900 lbs Kids stock / GTPOMMA 16 hp single and under single cyl hot

stock

STOCK REQUIREMENTS 900#: Age Limit: 16 years and under. Weight: 900 pounds, including tractor,
driver and helmet. Fuel: Any type gas, no alcohol or nitro. Engine: Factory type engine only 10 HP and
under, naturally aspirated single cylinder. No motorcycle engines allowed. Engines are limited to stock
stroke. Engines bore limited to .030 over stock including normal wear. Mechanical or electrical full
pumps are allowed. No velocity stacks or extensions allowed. Intake and exhaust may be ported and
polished. Engines will be limited to 4000 RPM. Engine must have working governor, stock camshaft,
stock head, stock valves, stock carburetor and stock flywheel. Steel flywheel is optional. May run 18
horse cam. Valve .325 lift maximum valve movement May run inserted stock rods or aftermarket rods
stock stroke. Can run GM points modification. Can change duration on cam. May alter gear ratio.
Maximum wheel base: 56" from center of rear axle to center of front axle and 96" overall length, from
center rear axle forward including extended weight bar. Maximum tire size: 26 x 12 x 12
PROFESSIONAL CUT tires are permitted Hitch Height: 13" 7 years or under must have a parent walking
beside the tractor during the pull with a remote kill switch. See: SAFETY REQUIREMENTS FOR ALL
TRACTORS for additional setup requirements.
HOT STOCK 1050#:
Weight: 1050 pounds, including tractor, driver and helmet. Fuel: Any type gas, no alcohol or nitro.
Engine: Factory type engine -- 12 -16 HP single cylinder flat head. No motorcycle engines allowed.
Engines are limited to stock stroke. Engines bore limited to .030 over stock including normal wear.
Mechanical or electrical full pumps are allowed. No velocity stacks or extensions allowed.
Must run stock appearing carburetor. Intake and exhaust may be ported and polished. Engines will be
open RPM.
All parts are to be stock OEM specifications and location, except may run recast head with spark plug in
stock location. Engine may have working governor, if desired. Steel flywheel required. May run inserted
stock rods or aftermarket rods stock stroke. Can run GM modification. Can change duration on cam. May
alter gear ratio. May run 18 horse cam. Valve .325 lift valve movement maximum.. Maximum wheel base:
56" from center of rear axle to center of front axle and 96" overall length, from center rear axle forward
including extended weight bar. Maximum tire size: 26 x 12 x 12 Professional cut tires are permitted.
Hitch Height: 13" See: SAFETY REQUIREMENTS FOR ALL TRACTORS for additional setup
requirements.

You might also like