Professional Documents
Culture Documents
Pdmslpdms Comands
Pdmslpdms Comands
Q
TYPE GIVES THE FRMW STYLE TYPE(ie STLS)
Q E GIVES THE CE EAST CO-ORDINATE
Q ELEM GIVES THE CE ELEMENT NAME
Q FRAD GIVES THE PLOO/PAVE RADIUS ie 100mm
GIVES THE NXTR/VERT RADIUS ie 100mm
Q FPT (DRAFT) GIVES THE STRA FROM POINT CO-ORDS.
Q FUNC GIVES THE CE FUNCTION
Q GCOF GIVES THE CE GROSS C OF G
Q GTYP GIVES THE GENERIC TYPE ie OD,HP,TG
FLIP CE FLIPS CE
GETWORK GETS LATEST MODEL
INCL CIRC 1 OF NOTE/TABLE REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATION
INCL ID@ GIVES THE CE CO-ORDINATES (START)OR ITEM TO BE TRANSFERED
INCL NAME REPOSITIONS CE TO A SELECTED DESTINATION
LOCK ALL LOCKS CE & CE MEMBERS
MAR CE MARKS CE NAME
NAME /TEMPORARY RENAMES SAID ITEM TO TEMPORARY
NEW FITT COPY PREV BY ZDIST PROP 1 BANG 180 COPIES FITT AT END POITION OF CE
AT A
BANGLE OF 180
PROP 0 START POSITION CE
PROP 0.5 MIDDLE POSITION CE
PROP 1 END POSITION CE
NEW GLAB COPY $V1 COPIES GLAB AS VARIABLE $V1
NEW GLAB COPY PREV AT @ COPIES GLAB TO PICKED LOCATION
NEW SCTN COPY PREV BY E200 (PDMS) COPIES CE E200
NEW SCTN COPY PREV BY E200 COL 4(PDMS) COPIES CE E200 COL 4
NEW PANE COPY PREV BY E200 COL 4(PDMS) COPIES CE E200 COL 4
NEW TEXP COPY PREV BY Y10 (DRAFT) COPIES CE Y10
NEW SYMB COPY PREV BY X-10 (DRAFT) COPIES CE X-10
NEW VRTX COPY PREV BY X10 (DRAFT) COPIES CE X10 (CLOUDS)
PKEY LTOC CHANGES DIM FROM EXIST JUSL TO LTOC
REFRESH REFRESHES THE SCREEN
REM CE REMOVES THE CE
RENAME /XXX /YYY RENAMES CE TO YYY
REPRES DARC 1 SETS ARC TOLERENCE TO 1mm
REPRES DARC DEF SETS ARC TOLERENCE TO 10mm (DEFAULT)
REPRES HOLES ON ADDS HOLES REPRESENTATION (Apply Add in Drawlist)
REPRES OBSTRUCTION OFF REMOVES OBSTRUCTION REPRESENTATION
REPRES HOLES OFF REMOVES HOLE REPRESENTATION (Apply Add in Drawlist)
REPRES PNODE COL YELLOW PRIMARY NODES SHOWN YELLOW
REPRES PNODE ON PRIMARY NODES SHOWN ONLY
REPRES PNODE SIZE 6 CHANGES PRIMARY NODES TO 6mm
REPRES PROF ON CL OFF SETS PROFILE REPR AS SOLID
REPRES SNODE OFF SECONDARY NODES OFF
ROT THRO POSE ABO D BY 30 ROTATES CE ABOUT END POS BY 30 DEG
ROT THRO POSS ABO D BY 45 ROTATES CE ABOUT START POS BY 45 DEG ROT THRO
MIDP ABO D BY 90 ROTATES CE ABOUT MIDP POS BY 90 DEG ROT ABO IDP@ BY 90
ROTATES CE LOCAL TO PPOINT BY 90 DEG.
ROT ABO IDPL@ BY 90 ROTATES CE LOCAL TO PLINE BY 90 DEG.
ROT THR IDP@ BY 90 ROTATES CE ABOUT ANY PPOINT BY 90 DEG.
ROT THR IDPL@ BY 90 ROTATES CE ABOUT ANY PLINE BY 90 DEG.
ROT ABO P1 BY 90 ROTATES CE ABOUT P1 BY 90 DEG.
SAM LETS YOU TOGGLE BETWEEN LAST 2 ITEMS
SAVEWORK SAVES LATEST WORK
UNCLAIM ALL UNLOCKS ALL CLAIMED MEMBERS
UNLOCK ALL UNLOCKS CE & CE MEMBERS
UNM CE UNMARKS CE NAME
PREC 4 DP GIVES PRECISE READOUT TO 4 DEC. POINTS
ZDIST (ZDIST + 100) MOVES ITEM 100 FROM ORIG POSITION
DRAFT QUERY COMMANDS
Note: most of the query commands used in PDMS DESIGN also work in DRAFT
Q ADEG GIVES THE C/VIEW ANGLE ( ie 90 DEG )
o Q POS PPLI BOS WRT/* Query the bottom BOS pline coordinates
o Q POS PPLI NA PROP 0.5 Query the neutral axis NA middle of pline
coordinates (position of the pline at (PPLI) at
(0.5 x DER LEN) on the NA
o Q POSS Query position start of the SCTN
o Q POSS POSE Query position start and end of the SCTN
PINS
Utilisation des pins.
o PIN1 AT PPLI BOS PROP 0.5 POS PIN1 at middle of pline BOS
o PIN1 PLAN N THR PIN2 Move the Pin1 through Pin2 with a normal to
plan north
o PIN1 COPY IDP@ Create pin1 according Ppoint choosen
o PIN1 COPY PIN2 Create Pin2 by copy of Pin1
o PIN1 DIR D Orient PIN1 down
o PIN1 DIR U WRT/* THR IDP@ Move PIN1 UP TO A SELECTED PPOJNT
o PIN2 DIR D WRT/* THR IDPL@ Move PIN2 Down to a selected pline
o PIN1 BY D 8 Move PIN1 Down 8mm
o PIN6 OFF Turn PIN6 OFF
o POS PIN3 AT CE Position PIN3 at axis of CE
o Q DIR PIN1 Query Pin1 direction
Query PIPING.
o Q BORE Give the pipe bore
o Q POD1 Give the Outside diameter 1
o Q CLLE Give the branch lenght
o Q HPOS Give the CE pipe HEAD coord
o Q HT Give the CE hanger TAIL coord
o Q ISPEC Give the CE (PIPE) insulation
o Q PA Give the CE ARRIVE coordinates with
Respect World
o Q PA TOP WRT/* Give the CE ARRIVE coord at T0P of pipe
o Q PA BOP WRT/* Give the CE arrive coord at BOP of pipe
o Q PH BORE Give the CE pipe head bore
o Q PH OD Give the CE pipe head external diameter
o Q PI WRT/* Give the CE (PIPE SUPPT) location
o Q PL WRT/* Give the CE LEAVE coordinates
o Q PT OD Give the Pipe tail Outside Diameter
o Q TPOS Give the pipe tail coordinates
o Q CREF Give the connection reference
o Q PT Give the pipe tail attributes
o Q ITLE Give the length of the implied tube
o CONN TO PREV Connect the CE to previous element
o CONN TO NEXT Connect the CE to next element
o FCONN TO PREV Force connection with incompatibles COCO
o Q MTOT Give the MTO Status for the tubing
o Q MTOC Give the MTO status for component
o Q TULE Give the Branch tube length
o Q MTLE Give Length of material tube
o Q MTLL Give CL. Length of material tube
o Q NCOF Give the CE net COG
o Q NSRF Give the CE net surface
o Q NVOL Give the CE net volume
o Q NWEI Give the net weight
o Q SPRE Give the CE specification reference
o Q GCOF Give the CE gross Centre OF Gravity
o Q GWEI Give the CE gross weight
o Q MASS Give the centre of gravity and surface and
volume
o Q VOL CE Give the Volume box in coordinate ENU
o Q WVOL Give the Volume box in coordinate ENU
o Q BANG Give the beta angle of the SCTN
o
o
o
o
o