Professional Documents
Culture Documents
C1-C1+ New 73T Fix Gear TP09-7
C1-C1+ New 73T Fix Gear TP09-7
Date:
TP09 253a.pdf
08-10-09
imagePRESS C1+
GENERAL:
This Technical Publication details the improved durability of the 73T Gear for the imagePRESS C1/C1+
Fixing Assembly. With the increased thickness of the new style gear, periodical replacement of this part
will not be necessary.
DETAILS:
The width of teeth of the 73T Gear [P-1] is changed from 8.5 mm to 10.5 mm to improve its durability.
With this improved durability, this part will no longer be considered a periodically replaced part. The old
Gear has a 0.5 mm flange protruding from the rear and can be used to quickly identify the difference
between the old and new Gears.
THIS TECHNICAL PUBLICATION IS THE PROPERTY OF CANON U.S.A. INC. AND CONTAINS CONFIDENTIAL INFORMATION OWNED BY OR LICENSED TO,
CANON U.S.A., AUTHORIZED CANON U.S.A., DEALERS MAY USE THIS TECHNICAL PUBLICATION FOR REFERENCE PURPOSES ONLY. ANY OTHER USE
BY AN AUTHORIZED CANON USA DEALER, OR USE BY ANY THIRD PARTY, IS PROHIBITED.
For additional technical information, please visit the Canon Systems and Technical Support Division website at:
www.support.cusa.canon.com. You can also call the Technical Support Center at 1-800-528-2830 or contact your Regional Support Office.
Page 1 of 2
e-Support Filename:
Date:
TP09 253a.pdf
08-10-09
SERVICE PARTS:
Description
Part Number
Fig. No.
Qty
Old
73T GEAR
FU6-0609-000
810
1->0
New
73T GEAR
FU6-0609-010
810
0->1
Page 2 of 2