Professional Documents
Culture Documents
TMA Configuration For U2100 and G1800
TMA Configuration For U2100 and G1800
MTMABTS3900
2 TMA have two power supply scheme, separation power supply and one port power
supply. The TMA will select the power supply mode by its self.
Separate modetwo port power supply.
2015-3-25
1 , 3
3When scan the TMA, if the installation correct, the TMA will report Two serial
number.One is for 1800Mhz, and the other is for 2100Mhz,we can judge the
frequency from the serial number.
FD180552132007E
FD211069132007E
Such as these two serial number , FD180552132007E is for the 1800Mhz, and FD211069132007E is for
the 2100Mhz.
In IAM TMA should be power supply for only one port, but had combiner with
1800Mhz, so need to add DC stop on the Combiner.
Like the figure below: Open the power switch for the R0A of 2100Mhz and configure
the TMA on U2100Mhz cells.
2015-3-25
2 , 3
2015-3-25
3 , 3