This lab report compares the microstructure of 30MnCrB 5 steel quenched from two different processes. Steel was quenched from 960 degrees C using residual heat and had a grain size of 6/7. Additional steel was quenched in a mesh-belt furnace at 860 degrees C to water and had a larger grain size of 9/10. Both samples were examined at 500x magnification after etching with oxalic acid.
This lab report compares the microstructure of 30MnCrB 5 steel quenched from two different processes. Steel was quenched from 960 degrees C using residual heat and had a grain size of 6/7. Additional steel was quenched in a mesh-belt furnace at 860 degrees C to water and had a larger grain size of 9/10. Both samples were examined at 500x magnification after etching with oxalic acid.
This lab report compares the microstructure of 30MnCrB 5 steel quenched from two different processes. Steel was quenched from 960 degrees C using residual heat and had a grain size of 6/7. Additional steel was quenched in a mesh-belt furnace at 860 degrees C to water and had a larger grain size of 9/10. Both samples were examined at 500x magnification after etching with oxalic acid.