Professional Documents
Culture Documents
Step 2
2-1. Execute quick upgrade.exe
2-2. Click Scan marked 1, detected land disk will have IP address+firmware
presented
2-3. Click the red circled area marked 2
2-4. Press Browse marked 3
2-9.A small window pops up. Do not turn off power or it will cause firmware damage.
2-10. Widow pops a message widow indicating the success of firmware upgrade.
2-11. Apply IE to enter the administration page under http://169.254.0.1. Make sure
the firmware and loader is correct
2-12. From the main page, you do not see any difference in firmware changes since it
still shows NAS-BASIC47 Loader69
However, go to Maintenance page and find the red circled line as below. This only
shows in new firmware named V47 loader69