Professional Documents
Culture Documents
ABSTRACT:
The major action in this system is controlled by transmitter section; this
section consists of IR transmitter and IR receiver and RF transmitter .and
Here we need to generate IR frequency continuously, so that by using a
small tiny micro controller frequency is produced and is connected to the IR
led to generate IR light rays of 38 kHz frequency.
IR receiver continuously receives the signals from the transmitter .when ever
the light path in between IR transmitter and IR receiver cuts by an Obstacle,
receiver signal gives low to high pulse.
By connecting the receiver output to the micro controller interrupt pin, it
gives interrupt to the micro controller. Immediately the system gives the
buzzer and sends the message to the remote location by using RF
transmitter. RF receiver is tends to display the message on LCD display by
connecting it to the micro controller
BLOCK DIAGRAM:
TRANSMITTER SECTION:
A
T
9
0
S
2
3
1
3
IR
TRANSMITTER
IR
RECEIVER
L
C
D
RECEIVER SECTION:
RF
RECEIVER
HARDWARE:
AT89S52
AT90S2313
LCD DISPLAY
TLP434
RLP434
IR LED
IR RECEIVER
A
T
8
S
5
2
L
C
D
D
I
S
P
L
A
Y
A
T
8
9
S
5
2
BUZZER
RF TX
SOFTWARE:
Embedded c programming
Functionality of all above components
Rf communication concept
Micro controller working principle
ADVANTAGES:
LOW COST
RELIABLE CIRCUIT
APPLICATIONS:
USED IN HOMES
USED IN OFFICES
USED IN INDUSTRIES
USED IN HOTELS ETC