The document describes a system that uses RF communication to detect power failures in the home. A transmitter circuit with a vibration sensor detects when power is lost and sends a signal to a receiver using RF. The receiver then displays the failure details on an LCD screen and sounds an alarm. The system consists of microcontrollers, LCDs, RF transmitters/receivers, encoders/decoders, a potential transformer, and a power failure circuit to detect loss of power and send a wireless alert.
Original Description:
POWER FAILURES AUTO ALERT ANNOUNCEMENT SYSTEM IN HOME
Original Title
POWER FAILURES AUTO ALERT ANNOUNCEMENT SYSTEM IN HOME
The document describes a system that uses RF communication to detect power failures in the home. A transmitter circuit with a vibration sensor detects when power is lost and sends a signal to a receiver using RF. The receiver then displays the failure details on an LCD screen and sounds an alarm. The system consists of microcontrollers, LCDs, RF transmitters/receivers, encoders/decoders, a potential transformer, and a power failure circuit to detect loss of power and send a wireless alert.
The document describes a system that uses RF communication to detect power failures in the home. A transmitter circuit with a vibration sensor detects when power is lost and sends a signal to a receiver using RF. The receiver then displays the failure details on an LCD screen and sounds an alarm. The system consists of microcontrollers, LCDs, RF transmitters/receivers, encoders/decoders, a potential transformer, and a power failure circuit to detect loss of power and send a wireless alert.
The project has developed for identify the power failure by RF
communication. The transmitter consists of vibration sensor. If power failure from power line, the power failure circuit has detected the status change and passes this information to receiver by RF communication.
Scope:
The project is focused on power failure identification by wireless
communication.
It consists of :
Microcontroller (2)
LCD
RF Transmitter & Receiver
Encoder & Decoder
Potential transformer
Power failure circuit
Alarm WORKING:
In transmitter side, it has transformer, power failure circuit,
Microcontroller, and RF transmitter. If power failure occurs, the power failure circuit provides the status change to microcontroller, which provides the needed details like transformer failure to encoder. The encoder used here for compress the data and then it sends through RF transmitter.
In receiver side, it has RF receiver, Decoder, Microcontroller, LCD and
alarm. The receiver continuously monitors the incoming signal from transmitter and it feeds to decoder for decompresses the data. Then it sends to microcontroller and LCD shows the details. And alarm makes the sound too.