Professional Documents
Culture Documents
sm1 49 PDF
sm1 49 PDF
49
KNOWN: Boiling point and latent heat of liquid oxygen. Diameter and emissivity of container. Free
convection coefficient and temperature of surrounding air and walls.
FIND: Mass evaporation rate.
SCHEMATIC:
ASSUMPTIONS: (1) Steady-state conditions, (2) Temperature of container outer surface equals
boiling point of oxygen.
ANALYSIS: (a) Applying mass and energy balances to a control surface about the container, it
follows that, at any instant,
dmst
dEst
out = m
evap
= m
= Ein E out = q conv + q rad q evap .
(1a,b)
dt
dt
With hf as the enthalpy of liquid oxygen and hg as the enthalpy of oxygen vapor, we have
out h g
Est = mst h f
q evap = m
(2a,b)
Combining Equations (1a) and (2a,b), Equation (1b) becomes (with hfg = hg hf)
out h fg = q conv + q rad
m
4
evap = ( q conv + q rad ) h fg = h ( T Ts ) + Tsur
Ts4 D2 h fg
m
(3)
m
=
evap
214 kJ kg
<
(b) Using Equation (3), the mass rate of vapor production can be determined for the range of
emissivity 0.2 to 0.94. The effect of increasing emissivity is to increase the heat rate into the container
and, hence, increase the vapor production rate.
1.9
1.8
1.7
1.6
1.5
1.4
0.2
0.4
0.6
0.8
COMMENTS: To reduce the loss of oxygen due to vapor production, insulation should be applied to
the outer surface of the container, in order to reduce qconv and qrad. Note from the calculations in part
(a), that heat transfer by convection is greater than by radiation exchange.
Excerpts from this work may be reproduced by instructors for distribution on a not-for-profit basis for testing or instructional purposes only to students enrolled in
courses for which the textbook has been adopted. Any other reproduction or translation of this work beyond that permitted by Sections 107 or 108 of the 1976
United States Copyright Act without the permission of the copyright owner is unlawful.