You are on page 1of 6

PROJECT REPORT SHALL INCLUDE..

Title Page
Certificate Page
Industry Certificate(For IDP)
Acknowledgements
GTU Declaration
Abstract
List of Figures
List of Tables
Abbreviation
Contents as per of Index

INDEX
Chapter 1 Introduction
1.1 Why we selected this project
1.2 Challenges Underlines into this project
1.3 Utilities of this Project
1.3.1 Subsection
1.3.2 Subsection
Chapter 2 Literature Review
1.2 Sections
1.2.1 Subsection
1.2.2 Subsection
Chapter 3 Project Planning (7th Sem)
Chapter 4 Methodology
1.2 Sections
1.2.1 Subsection
1.2.2 Subsection
Chapter 5 Hardware Description/Design
1.2 Sections
1.2.1 Subsection
1.2.2 Subsection
Chapter 6 Software /Simulation Description/ Design (If Any)
1.2 Sections
1.2.1 Subsection

1.2.2 Subsection
Result Analysis/Calculation
Conclusions
Future Scope
Bibliography and References
Appendix A Title
Appendix B Title

ABSTRACT

[Abstract text, Maximum 300 words]


Consists of
1. Objective
2. Experimental/ Computational work done/to be done.
3. Expected Results and discussion
4. Conclusions

ACKNOWLEDGEMENT
On completion of Part-I of our Project, it gives us great pleasure
and satisfaction. Hence, We would like to take this opportunity to express our
gratitude towards those who made this possible.
Words can not express the zeal of ecstasy while depicting our
deep sense of, gratitude to our esteemed, knowledgeable guide Prof.
GUIDE NAME, who inspires us to undertake this Project. His/Her dynamic
guidance and continuous interest kept us going in spite of all the difficulties.
His/Her technical guidance, knowledgeable and dynamic approach is the
corner stones. This dissertation could not be possible without his/her most
valuable suggestion and guidance.
We are also thankful to all the staff member of electrical
department for their kind support at various stages of the work. We are also
thankful to all the staff members of library to give timely book. It is beyond
the reach of our language to express our sincere gratitude to our parents, for
their infinite inspiration and sacrifices for the benefit of our academic career.

<<Name of all group Sudents with Enrollment No>>

A
PROJECT REPORT
ON

Project Title
By
[Your name as found in official GTU records]
[Enrollment Number]

Under The Guidance Of


[Guide Name with qualification and designation]
A Project Submitted to
Gujarat Technological University
in Partial Fulfillment of the Requirements for
the Degree of Bachelor of Engineering
in

(ELECTRICAL ENGINEERING)
OCT 2014

Department of electrical engineering


Government Engineering College,
K.J.Polytechnic campus,
Bholav, Bharuch
Gujarat, India

You might also like