DENTIPLAST is a thermoplastic impression material composed of resin, diethylhexylphthalate, paraffin, synthetic wax and pigments. It is a reversible material used for making impressions or framing complete dentures. To use, the material in a syringe is heated to 60-70 degrees Celsius and applied to an impression or tray, where it cools to a plasticity of 37 degrees Celsius to take an imprint. DENTIPLAST is stored in a dry, dark place between 15 to 25 degrees Celsius and has a 3 year shelf life when packaged in a 20 gram syringe.
DENTIPLAST is a thermoplastic impression material composed of resin, diethylhexylphthalate, paraffin, synthetic wax and pigments. It is a reversible material used for making impressions or framing complete dentures. To use, the material in a syringe is heated to 60-70 degrees Celsius and applied to an impression or tray, where it cools to a plasticity of 37 degrees Celsius to take an imprint. DENTIPLAST is stored in a dry, dark place between 15 to 25 degrees Celsius and has a 3 year shelf life when packaged in a 20 gram syringe.
DENTIPLAST is a thermoplastic impression material composed of resin, diethylhexylphthalate, paraffin, synthetic wax and pigments. It is a reversible material used for making impressions or framing complete dentures. To use, the material in a syringe is heated to 60-70 degrees Celsius and applied to an impression or tray, where it cools to a plasticity of 37 degrees Celsius to take an imprint. DENTIPLAST is stored in a dry, dark place between 15 to 25 degrees Celsius and has a 3 year shelf life when packaged in a 20 gram syringe.
Manufacturer: SpofaDental a.s., Markova 238, CZ-506 46 Jin, www.spofadental.com Composition: resin, diethylhexylphthalate, paraffin, synthetic wax, pigments, taste ingredients Characteritic: Reversible thermoplastic material for impressions or impression framing of complete dentures. Indications: Used mainly for framing of individual impression trays, but can be also used for making mucodynamic impressions of complete dentures. Applications: DENTIPLAST in a PE syringe is heated in water bath of the temperature of 60-70 C to the complete warming. After coating warmed DENTIPLAST to the impression or to the individual tray it is necessary to wait when material is cooling down. The material has an optimal plasticity at application temperature of about 37 C. DENTIPLAST takes imprints even of the texture of the mucobuccal folds. For so-called framing, it is applied to the impression edges in an individual tray. Storage: Store in a dry and dark place at 15 C to 25 C, in a well sealed container. Time of usability: 3 years Packaging: 20 gr in a PE syringe Last revision date: 30. 8. 2004