Professional Documents
Culture Documents
Diccionario Inglés T (Ecnico
Diccionario Inglés T (Ecnico
Installation
instruction
for
SL Multifunction keyboard USB
SL-Automatisierungstechnik GmbH
The keyboard foil of the control you want is inserted into the multifunction keyboard.
The multifunction keyboard is connected to the standard USB-interface of the PC with the connection
cable. If this is correctly connected, then the active level (0- 6) is indicated above right (on the picture
1 the level 1 is shown) after initializing. With the first start the drivers for the USB keyboard are loaded
automatically.
Picture 1:
The keys S1 to S4 and the displays of the foils of the multifunction keyboard
SL-Automatisierungstechnik GmbH
The current level definition is enclosed as information by the delivery. The level definition can be
changed however at any time (see also under Load driver). Exception here is the level 0. It is
occupied with the driver for the foil MF-II-PC keyboard (102 keys) and can not be changed.
S2 - ENTER - function ( only fort he loading operation ); with the USB -keyboard no function
Activate level
By repeated pressing of the key S1 (left above) on the multi-function keyboard the desired level can
be selected. The current level appears on the display (on the top right, see also picture 1).
1. The setting is confirmed with the key S4. The four green illuminating diodes (left beside the
level display) blink once (see also picture 1). The level selection remains active also after
switching the computer off up to next changing.
SL-Automatisierungstechnik GmbH
Select the button [START] of the Windows command line (Mouse click with the left key of
the mouse).
Select the item [Execute] (see picture 2) and enter the following:
X:\Winmftast\Winmftast.exe (whereby X must be replaced by the letter of your CD ROM
drive)
SL-Automatisierungstechnik GmbH
Or: Start das Setup-program via the WINDOWS -Explorer by selecting the CD ROM
drive and double-click with the left mouse button on the icon [ WinMFTast.exe ] for starting
the configuration program.
The configuration program starts thereby from the CD (see picture 3).
Picture 3: The surface of the installation software for the driver with the selection of the level
The configuration program shows you the definition of the six levels in the area
Before exiting the program (see picture 3).
The buttons which are on the lower line, have thereby the following meaning:
deletes all definitions of the individual levels, i.e. three small lines are
registered (see in the image 3 the levels 5 and 6).
calls this online help of the configuration program for the SL-Multifunction
keyboard.
cancel the new level definition and closes the configuration program for the
SL-Multifunction keyboards without transferring the data to the keyboard.
transfers the current level definition set to the SL-Multifunction keyboard.
SL-Automatisierungstechnik GmbH
with the left mouse key in the field of the level which can be defined.
Picture 4: The surface of the installation software for the driver with the selection of the level
resp.
or
with the cursor keys
with pressed left mouse button the scroll button at the right edge of list can be moved upward
and/or down.
If you move the pointer of mouse on the list a list entry is activated (coloured). With the releasing of
the left mouse button or pressing of the key [ENTER] the selected entry is transferred to the field for
the level definition.
The highest list entry consists of three lines (---) and serves the deletion of the current level definition
(see picture 3 level definition 5 and 6).
SL-Automatisierungstechnik GmbH
The current level definition is saved into the file C:\SL\WINMFTAST.INI when exiting the software.