Professional Documents
Culture Documents
Issue:02
Product Description
DTMA (Dual Tower Mounted Amplifier) is both main and diversity branch and
fits with cross-polarization antennas. DTMA is installed near the antenna at the
tower top to improve receiver sensitivity of the base station. The usage of DTMA
will result in an increase of successful call attempts, reduction of call drops,
maximized data transmission rate, improved call quality and extended handset
talk time.
Features
High linearity and low noise performance .
Balanced LNA design and power failure bypass for high reliability .
Light weight and compact design .
Wall mounting and mast mounting .
Built-in lightning protection .
Support AISG 1.1 or 2.0 protocol .
Technical Specifications
Specification
Item
Tx Specifications
Frequency range
2110MHz 2170MHz
Bandwidth
60 MHz
Insertion loss
Return loss
Tx-Rx rejection
18 dB
70 dB
<30 ns@5MHz
Input power
1920MHz 1980MHz
Bandwidth
60 MHz
Return loss
18 dB (DC ON)
13 dB(DC OFF)
2.5 dB
Gain
121 dB
Gain ripple
0.5 dB
Typ. 1.4 dB
Noise figure
OIP3
12 dBm
22 dBm
<30 ns@5MHz
75 dB
50 dB
Electrical Specifications
CWA Mode
AISG Mode
DC supply voltage
9 V15 V
9 V30 V
110 mA310 mA
50 mA490 mA
Alarm management
330 mA710 mA
AISG
Power consumption
<5 W
Environmental Specification
IP rating
-40+65
IP67
MTBF
>1000000h
EMC
Lightning protection
10kA (8/20us)
Mechanical Specification
RF connectors
AISG connector
Mounting
47/16 female
8-pin female, IEC 60130-9(Pin 3: RS485B, pin 5: RS485A, pin 6: 9V 30
V DC,pin 7: DC return, other pins: not connected)
Wall mounting/Mast mounting
Mast diameter
4.7 kg
30mm125mm
Dimensions(HWD)
Weight
Mechanical
Address: Huawei Technologies, Bantian Base, Longgang District, Shenzhen 518129 P.R.China.