Innovations for Quality, LLC
raining you at eed of need
ase | exe | estmowass
Certified Quality Engineer - Sample Quiz
Short quiz to test your understanding of the CQE body of knowledge,
1, Rank the following data types in order from least powerful to most powerful
1. Interval
2. Ordinal
3. Ratio
4. Nominal
2. You are studying a transactional process that has an average error rate of 2.7%. You have.
implemented an improvement, You sample four days and find the error rates to be 2.2, 2.3,
2.55 and 2.7. Whicn of the following is true?
a at 95% confidence there is an improvement at 97.5% there is not
at 95% and 97.5% confidence there are improvements,
there is not an improvement at 95% and 97.5% confidence
d there is confidence at 97.5% but not at 95%
3. You are studying a 2 process that yields an average diameter of 1.503" and a standard deviation
‘of .003” with a sample size of 25. What is the 99% confidence interval for the average of samples.
taken?
1,503 +/-,0012
b 1.503 +/- 10015
1.503 +/- 009
.1,503 +/-.003
4. On the CQE exam the average was 2 74 with a standerd deviation of 9. What percentage of
students scored above a 86?
2 10.42%
9.46%
69.18%
8.98%
5. The alpha error is:
fa the producers risk and can be reduced by reducing the 8 error.
b the producers risk and can be reduced by increasing the 8 error.
c the consumers risk and can be reduced by increasing sample size.
d the consumers risk and can be reduced by increasing the & errorFor help, answers and solutions keep scrolling down
Alittle help
1. one data type ts go /nago ane data type is ranked ( 1= lowest, 5~ highest) one data type is.
variable with no true zero (temp, calendar) one data type is variable with true zero (weight, distance)
2, one tallt test
3 use the 2 value for confidence with the standard deviation and sample size
4zvalue
5 alpha is indirectly proportional to 6Solutions to problems
1. Nominal data is go/no go, Ordinal data is ranked, Interval data is variable with no true zero and
Ratio data is variable with
a true zero,
2. The average of the sample is 2.4375 and the standard deviation is 2287
(2.7 = 2.4375) / (.2287/v4)
ts .2625/.11435
t= 2.2956
tert for 3df @ 95% = 2.353,
tert for 3df @ 97.5% = 3.182
43. confidence interval = +/- Zs/vn
Z value for 99% under curve is 2.575
Confidence interval = +/- 2.575(.003/5
4/- 0015
4.2 = (86-74)/9
2=133,
‘Area under curve for 1.33 sigma away from mean is 0918
5. alpha Is proportional to 8 and is a type I or consumers risk.
‘width’ is a duplicate attribute name, Line 1, position 36, ‘width’ is @ duplicate attribute name, Line 1, position
36.
Certified Quality Engineer|CQE|Certified Quality Auditor|CQA|CSSBB |Certified Quality
Manager | Certified Quality Technician | CQT
Copyright 2015. Innovations for Quality, LLC, All rights reserved,