The document discusses partially opposed features of size in ASME Y14.5 standards. It notes that there are at least 18 examples of partially opposed features of size in Y14.5 and numerous cases in industry. Partially opposed features of size cause problems when determining the local master size in non-opposed areas. It also defines "feature of size" and "size" based on Y14.5 and discusses problems with determining the actual local size when features are only partially opposed.
The document discusses partially opposed features of size in ASME Y14.5 standards. It notes that there are at least 18 examples of partially opposed features of size in Y14.5 and numerous cases in industry. Partially opposed features of size cause problems when determining the local master size in non-opposed areas. It also defines "feature of size" and "size" based on Y14.5 and discusses problems with determining the actual local size when features are only partially opposed.
The document discusses partially opposed features of size in ASME Y14.5 standards. It notes that there are at least 18 examples of partially opposed features of size in Y14.5 and numerous cases in industry. Partially opposed features of size cause problems when determining the local master size in non-opposed areas. It also defines "feature of size" and "size" based on Y14.5 and discusses problems with determining the actual local size when features are only partially opposed.
opposed features of size in Y14.5. There are numerous cases of partially opposed features of size in industry. Partially opposed features of size cause problems when determining the LMC size in the non-opposed areas.
ASME Y14.5 presentation by Alex Krulikowski
May 2005
Definition of feature of size from Y14.5
1.3.17 Feature of Size. One cylindrical or spherical
surface, or set of two opposed elements or opposed parallel surfaces, associated with a size dimension.
ASME Y14.5 presentation by Alex Krulikowski
May 2005
Definition of Size from Y14.5
5-1
Assumes Rule #1 is in effect In Y14.5 the definition for size is limited.
ASME Y14.5 presentation by Alex Krulikowski
May 2005
Definition of Size from Y14.5
Problems with Actual Local Size
5-1
The direction of measurement is not described,
resulting in many answers possible for the value. It describes a two-point measurement Only works with opposed points