High performance road marking designed for
superior day and dry night visibility
Brief Introduction:
Thermoplastic Road Marking Material is 2
formulation of plasticized resin, aggregate,
pigment and glass beads supplied in dry
powder form, heated and applied to the road
surface where it cools and sets very quickly.
Automark Thermoplastic Road Marking
Material is manufactured under strict quality
control parameters — specified by
JIS_K 5665 - 1981by our qualified team of
production and laboratory Professionals, by
the aid of modern computerized equipments
The material consists of 100% solids and is
environment friendly as it is solvent free.
Thermoplastic road markings are generally
more superior and cost effective than paint
markings due to better durability, reflectivity,
and visibility.
Advantages of Automark Thermoplastic
Road Marking Material:
* High performance (Day and Night) and
long lasting retro- reflectivity
Fast drying, thus good flow resistance
Excellent adhesion
High durability and Good Colour Stability
Good skid resistance
Good Whether Resistance
Non - toxic and environment friendly
* Value for money with long lasting results
Use of Thermoplastic Road Marking Material
may reduce over 25% of accidents by
improving the performance of road markings
THERMOPLASTIC
ROAD MARKING
MATERIAL
AS PER JIS K 5665 - 1981
Quality Assurance:
Committed to the philosophy of continuous
innovation, the focus of our Research &
Development efforts has always been in
developing products for typical Indian
environment. User friendliness, ease of
operation, longer service life, ease of
maintenance and cost - effectiveness are
some of the values that guide our R&D efforts.
Our company policy is to do continuous
research & development of new products to
meet customer's specifications in all climatic
conditions.
Packing & Storage:
Packing: 25 kg sealed polythene sacks.
Storage period: 1 Year
Storage Condition: Under cover in dry
condition
AUTOMARK THERMOPLASTIC ROAD MARKING MATERIAL IS AVAILABLE IN WHITE / YELLOW
COLOUR & OTHER COLOURS ON REQUEST.THERMOPLASTIC ROAD MARKING MATERIAL
whi Yellow
Technical Data | Requirementas per
SIS K 5685 Requirement as per JIS K
Automarks* 565, Automarks’
Density @0°C) glen Tmax Z3 max
Complies Complies
Softening point °C 80min, 80 min.
Complies Com
"To show normal To show normal
‘Appearance of paint ‘appearance ‘appearance
fim fon the paint film, (onthe paint film.
Complies Complies
Worto adhere toa tre Notte adhere toa tres min
‘Adhesiveness to tire ‘3 min later. later.
Passes
Visual reflectance
(Dittuse reflectance)
{only for white) 75min. 50 min.
Complies Complies
Yallonness
{only for white) oor otooa
Complies Complies
“Abrasion resistance
(per 100 revs.) mg 200 max. 200 max |
| complies |_complies
Compressive strength T
klem* (kgicm’) 247(120) min. | 1.27720) min.
| complies Complies
Wo abnormality shall Wo abnormality shall be
be found after 18 h {ound after 18 h immersion
Alkall resistance Immersion in alkall Inala,
Passes: Passes.
‘Amount of Glass T
beads contained (mass |
%) 151018 11018
Complies Complies
‘Beads Shall be
‘Beads Shall be spherical
particles, and total ratio of
acute, angle ‘those with defects of
shapevuntranspar elliptical sharp, acute,
eny foreign angle
matters, fusion shape,untranspareny .
between foreign matters, |
particles shall be tusion between
not greater than particles shall be not
‘Appearance and 20 % (particles greater than 20 %
‘shapes of glass beads | numbers) (particles number%)
Passes PassesSurface Preparation:
The surface should be dry, free from
dust, dirt, grease or oil & any other
detritus material for spray .
The road surface temperature should be
above 5 °C. Ideally existing markings
should be removed prior to application.
Thermoplastic Road = — Marking
Material may be applied over existing
thermoplastic markings provided that
they are in a sound condition & will not
be easily removed from the road
surface. Thermoplastic Road Marking
Material should not be applied over old
paint markings.
On worn bituminous and concrete
surfaces, a suitable tack coat primer
should be used in accordance with the
manufacturers instructions prior to
application
It should be noted that thermoplastic
road markings laid on new bituminos
surfaces could suffer from “bitumen
carry-over" leading to discolouration &
masking of the road markings.
AUTOMARK TECHNOLOGIES (INDIA) PVT. LTD.
Ragd. Office: Gurukripa’ Datta Square, Yavatmal- Corp. Office: 1st Floor, “Sarat
4445001 (MS) Incia Ph # 0001-7232-244134, 244247, Court", Opp. Yeshwant Stadium,
243275; Fax # 0091-7232-245430 Dhantoli, Nagpur- 440012. (MS.)
‘ANSO 9003 = 2000
COMPANY
Email: info@automarktech.com; www.automarktech.com india,
Plant; 18 km. Stone, Bothail Vilage, Wardha Roed, Px # 0712 - 6603671
lagpur (M.S. India,
Fax # 0712 - 6603679