Professional Documents
Culture Documents
Mediatrix Configuration Procedure
Mediatrix Configuration Procedure
GWC14 New
Mediatrix
Configuration
Medatrix – Configuring new Medatrix.
Note: - All the below steps can be done when the Mediatrix is up and IP reachable
from the network.
• Then go To Unit Manager and search for the ip address of the MTX, then
right click on MGCP as showing in below picture.
• Change the Static FQDN to the same Hostname of the Gateway that you have
configured. And also the mode to Static.
• Reboot the MTX. This should allow Nortel to register this box and ip address
will appear in LMM
Page 2 /3
Page 3 /3