Professional Documents
Culture Documents
Series PVP Variable Volume Piston Pumps: Catalog HY28-2661-CD/US
Series PVP Variable Volume Piston Pumps: Catalog HY28-2661-CD/US
Produccin CNC, SA de CV
Av. Pie de la Cuesta No. 1440
Local 2 Col. Amalia Solorzano
Quertaro, Qro. CP 76130
Tel. (442) 253 7834
Fax. (442) 253 7997
www.parkercnc.com.mx
Series PVP
Variable Volume
Piston Pumps
Catalog HY28-2661-CD/US
zp02
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Notes
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Introduction
Series Sizes 60 - 140
Phased Out
For Reference Only
Please see PE Series
Displacement
cc/rev
(In3/rev)
Pump Delivery
@ 21 bar (300 PSI)
in LPM (GPM)
1200 RPM
1800 RPM
Input Power At
1800 RPM, Max.
Displacement &
34 bar
69 bar
138 bar 207 bar 248 bar
(500 PSI) (1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI) 248 bar (3600 PSI)
Pressure
Operating
bar (PSI)
Speed (RPM)
Continuous
(Maximum)
(Maximum)
PVP16
16
(.98)
19.7
(5.2)
29.5
(7.8)
53 (47)
55 (50)
59 (54)
62 (56)
65 (59)
3000
248 (3600)
PVP23
23
(1.4)
28.0
(7.4)
42.0 (11.1)
61 (57)
64 (59)
67 (63)
69 (65)
70 (65)
3000
248 (3600)
PVP33
33
(2.0)
39.4 (10.4)
59.0 (15.6)
64 (59)
66 (59)
68 (62)
70 (64)
71 (65)
3000
248 (3600)
PVP41
41
(2.5)
49.2 (13.0)
73.8 (19.5)
68 (60)
70 (61)
73 (65)
74 (67)
75 (69)
2800
248 (3600)
PVP48
48
(2.9)
57.6 (15.2)
86.4 (22.8)
69 (60)
71 (62)
73 (65)
75 (68)
76 (69)
2400
248 (3600)
Pump Delivery
@ 21 bar (300 PSI)
in LPM (GPM)
Input Power At
Pressure
Operating
1800 RPM, Max.
bar (PSI)
Speed (RPM)
34 bar
69 bar
138 bar 207 bar 248 bar Displacement & (Maximum) Continuous
(Maximum)
(500 PSI) (1000 PSI)(2000 PSI)(3000 PSI)(3600 PSI) 248 bar (3600 PSI)
Pump
Model
Displacement
cc/rev
(In3/rev)
PVP60
60 (3.7)
73 (69)
75 (70)
77 (70)
77 (70)
2200
248 (3600)
PVP76
76 (4.6)
75 (69)
75 (70)
77 (70)
78 (72)
2200
248 (3600)
PVP100
100 (6.1)
75 (69)
78 (72)
79 (75)
81 (75)
1800
248 (3600)
PVP140
140 (8.54)
80 (72)
80 (75)
82 (76)
1800
248 (3600)
1200 RPM
1800 RPM
* Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed that the above readings
will be equal to those in the field. The above values are for guidance in selecting the proper pump. Noise levels are A-weighted, mean
sound pressure levels at 1 meter from the pump, measured and recorded in accordance with applicable ISO and NFPA standards.
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Introduction
COMPENSATOR
SPOOL
SERVO
PISTON
PUMP
HOUSING
CASE
DRAIN
BIAS
SPRING
SHAFT
BEARING
OUTLET
PORT
REAR
COVER
PISTON
INLET
PORT
SHAFT
BEARING
PORT
PLATE
CYLINDER
BARREL
SWASH
PLATE
Features
Controls
SHAFT
SEAL
Pressure Compensation
Load Sensing
Horsepower Limiting
Horsepower and Load Sensing
Remote Pressure Compensation
Adjustable Maximum Volume Stop
Hi/Lo Torque (Power) Limiting
(PVP 41/48, 60/76, 100/140 Only)
Low Pressure Standby
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Control Options
General Description
SERVO PISTON
BIAS
SPRING
OUTLET
DRIVE
SHAFT
INLET
PISTON
SWASH
PLATE
CYLINDER
BARREL
FIGURE 1
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Control Options
Pressure Compensated Control (OMIT)
OUTLET PORT
+Q
-Q
INLET PORT
CASE DRAIN
PORT
SERVO PISTON
OUTLET
PORT
PISTON
INLET
PORT
FIGURE 2
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Control Options
Remote Pressure Control (M)
PVP SERIES
"A" PORT
("A" PORT)
REMOTE PORT
OUTLET PORT
+Q
-Q
INLET PORT
CASE DRAIN
PORT
SERVO PISTON
OUTLET
PORT
INLET
PORT
PISTON
FIGURE 3
hpm102-1.p65, lw, jk
Catalog HY28-2661-CD/US
Control Options
Flow Control (Load Sensing) (A)
spool and will urge the spool to the left until output
pressure acting on the left side of the spool balances
the forces. As the load increases, output pressure
will increase and maintain a constant differential
pressure across the orifice and thus a constant flow.
Maximum pressure is limited by the internal dart setting.
This setting is adjustable up to the maximum preset at
the factory.
SENSE LINE
VARIABLE OR
FIXED ORIIFICE
OUTLET PORT
SENSE PORT
ORIFICE
+Q
REMOTE
PORT
-Q
SIGNAL LINE
INLET PORT
CASE DRAIN
PORT
PORT A
ORIFICE
MAX. PRESSURE
ADJUSTMENT
COMPENSATOR
SPOOL
DIFFERENTIAL
SPRING
CHAMBER
DIFFERENTIAL
ADJUSTMENT
VARIABLE OR
FIXED ORIFICE
SERVO PISTON
SYSTEM PRESSURE
OUTLET
PORT
PISTON
INLET
PORT
hpm102-1.p65, lw, jk
FIGURE 4
Catalog HY28-2661-CD/US
Control Options
Pressure & Power Control (H)
This control option is a Torque Limiting Control, but for
constant speed applications it is generally referred to
as a Horsepower Control. This control works in
conjunction with the Remote Pressure Compensator,
control option M. A second pressure control device
called a horsepower control block, is assembled to the
main pump housing. The HP block is plumbed to one
of the ports on the remote compensator via steel tubing.
The control dart in the HP block and the maximum
pressure compensator dart in the remote compensator
are connected in parallel. What makes the control dart
in the HP block different from any other external relief
valve is the pressure setting is mechanically linked to
the pump swashplate angle.
The cracking pressure of the HP dart is generally lower
than the cracking pressure of the remote compensator
dart. When the HP dart opens the pressure in the
OUTLET PORT
+Q
-Q
INLET PORT
CASE DRAIN
PORT
SERVO PISTON
OUTLET
PORT
INLET
PORT
hpm102-1.p65, lw, jk
PISTON
SHOWN AT FULL STROKE.
CAM WILL ROTATE CW
AS PUMP GOES TOWARD
ZERO STROKE.
FIGURE 5
Catalog HY28-2661-CD/US
Control Options
Pressure, Power & Flow Control (C)
Refer to the previous section(s) on Flow Control and
Power Control. This is another case where multiple
controls can be combined in parallel. Since the Power
Control is just a special version of Remote Pressure
Control, it can be combined with the Flow Control (Load
Sense) option. The main point to remember here is
that the pressure drop which is required to begin and
maintain compensation comes from an external device
(such as a proportional valve). This sensed pressure
drop will control flow until one of the limits of the other
controls has been exceeded. The pump will always
respond to the lowest control setting for any given
pressure. In addition to Load Sensing, Power Control,
SENSE LINE
OUTLET PORT
SENSE PORT
+Q
SIGNAL LINE
REMOTE
PORT
-Q
ORIFICE
MAX. PRESSURE
ADJUSTMENT
COMPENSATOR
SPOOL
INLET PORT
CASE DRAIN
PORT
DIFFERENTIAL
SPRING
CHAMBER
DIFFERENTIAL
ADJUSTMENT
VARIABLE OR
FIXED ORIFICE
SERVO PISTON
SYSTEM
PRESSURE
OUTLET
PORT
INLET
PORT
hpm102-1.p65, lw, jk
PISTON
SHOWN AT FULL STROKE.
CAM WILL ROTATE CW
AS PUMP GOES TOWARD
ZERO STROKE.
FIGURE 6
10
Catalog HY28-2661-CD/US
Control Options
Hi/Lo Power Control (HLM)
(Available with PVP41 and PVP48 Only)
Outlet Flow
MAX. PSI
ADJUST
System Pressure
PVP SERIES
PRESSURE & POWER COMPENSATOR
CONTROL OPTION "HLM"
OUTLET PORT
REMOTE PORT
LOW P
HIGH P
INLET PORT
CASE DRAIN
PORT
SERVO PISTON
OUTLET
PORT
INLET
PORT
PISTON
FIGURE 7
hpm102-1.p65, lw, jk
11
Catalog HY28-2661-CD/US
Technical Information
Performance Information
Series PVP16 Pressure Compensated,
Variable Volume, Piston Pump
Features
High Strength Cast-Iron Housing for Reliability and
Quiet Operation
Vickers Porting Interchange
Optional Inlet/Outlet Locations for Ease of
Installation
Replaceable Bronze Port Plate
Replaceable Piston Slipper Plate
Thru-Shaft Capability SAE A and AA Pilots Offered
Low Noise Levels - Promote More Comfortable
Operating Environment
Fast Response Times
Metric Pilot Shaft and Ports Available
Specifications
Pressure Ratings
Outlet Port:
248 bar (3600 PSI) Continuous (P1)
310 bar (4500 PSI) Peak (P3)
Controls
Inlet Port:
Pressure Compensation
Remote Pressure Compensation
Load Sensing
Torque (Power) Limiting
Adjustable Maximum Volume Stop
Low Pressure Standby
Schematic Symbol
(Basic Pump)
Filtration:
Mounting:
PVP16
Displacement
cc/rev
(In3/rev)
16.4 (1.0)
Pump Delivery
@ 21 bar (300 PSI)
in LPM (GPM)
1200 RPM
1800 RPM
19.7 (5.2)
29.5 (7.8)
34 bar
69 bar
138 bar
207 bar
248 bar
(500 PSI) (1000 PSI) (2000 PSI) (3000 PSI) (3600 PSI)
53 (47)
55 (50)
59 (54)
62 (56)
65 (59)
Input Power At
1800 RPM, Max.
Displacement &
248 bar (3600 PSI)
13.1 kw (17.5 hp)
hpm102-1.p65, lw, jk
12
Catalog HY28-2661-CD/US
Ordering Information
PVP
Multiple
Pumps
Code
Omit
Code
Pump
Variable
Piston
16
Displacement
Pressure
Range
Code
CM3/REV
(In3/Rev.)
16
16.4 (1.0)
Shaft
Multiple Pumps
Single Pump
Factory Mounted
to Rear of
Another Pump
Port &
Flange
Sizes
Rotation Volume
Stop
Option
Code
Rotation*
(CW)
ThruShaft
Threads
ThruShaft
Option
Control
Option
Seals
Painting
Omit
P
No Paint
Paint
Seals
Omit
(CCW)
Nitrile
Fluoroelastomers*
* FLUOROELASTOMERS
are available under
various registered
trademarks, including
FLUOROCARBON (a
registered trademark of
DuPont) and FLUOREL (a
registered trademark of
3M).
Pressure Range*
10
Code
20
Omit
30
6*
UNC
36
9**
Metric
Code
Omit
Code
Shaft Option
Thru-Shaft Threads
No Thru-Shaft
Multiple Pumps
Single Pump
Pump Factory
Mounted on Rear
Pilot
3/4" Keyed
SAE A
Code
B*
9T Spline (SAE A)
SAE A
Omit
11 Tooth Spline
SAE A
18mm Keyed
Omit
Multiple
Pumps
Code
Code
* Viewed from
shaft end.
Paint
Code
Control Options
No Volume Stop
Omit
Pressure Compensated
**M
**ME
Metric
*C
Pressure Compensated
and Power
*Specify HP, RPM & comp setting when
ordering or will will get default.
** "M" (May be remotely controlled)
"ME" (Requires external pilot)
*H
Ports
Code
Type
Location
Omit
SAE
SAE
Side - Flange
SAE
SAE
ISO
6149
BSPP
Code
Omit
Thru-Shaft Options
No Thru-Shaft
A1
A2
A4
hpm102-1.p65, lw, jk
13
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
PVP16 @ 1200 RPM
34.1
80
30.3
70
26.5
22.7
18.9
15.1
11.4
Overall Eff
iciency
11.9 16.0
3.8
0
0
Bar 0
PSI 0
8.9
ow
Fl
ull
7.6
KW
HP
14.9 20.0
Flow
er
w
Po
at F
6.0
ut
Inp
wer
Compensated Po
69
1000
138
2000
3.0
0
275
4000
207
3000
12.0
8.0
100
37.9
10
90
34.1
80
30.3
70
26.5
60
22.7
18.9
15.1
11.4
Volumetric Efficiency
Overall Efficiency
KW
HP
14.9 20.0
3.8
Q x (PSI)
1714
Fu
Power
Compensated
69
1000
138
2000
207
3000
8.9
12.0
6.0
8.0
3.0
4.0
0
275
4000
Pressure
at
tP
Pressure
HP =
r
we
u
Inp
0
0
Bar 0
PSI 0
11.9 16.0
lo
ll F
7.6
4.0
Flow
Power
90
Volumetric Efficiency
Flow
10
Efficiency - %
37.9
Power
100
Flow
Efficiency - %
LPM GPM
WHERE:
Q = Actual Output Flow in GPM
PSI = Pressure At Pump Outlet
CHp = Input Horsepower @ Full Compensation @ 1800
RPM
(from graph read at operating pressure)
+ (CHp)
bar
.41
PSI
6
.28
.14
Inlet Pressure
Vacuum
PVP16
Inlet Characteristics at Full Displacement
Recommended
Operating Condition
bar In-Hg
0
0
.17
.34
10
.51
15
.68
20
DO NOT OPERATE
IN THIS REGION
0
500
1000
1500
2000
2500
3000
LPM GPM
57.8 15.0
45.5
12.0
34.1
9.0
22.7
6.0
11.4
3.0
0
0
500
1000
1500
2000
2500
hpm102-1.p65, lw, jk
14
3000
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
Power Control
Nm In-Lbs
74.3 660
LPM GPM
30.3
8
Nm In-Lbs
72.0 640
63.0 560
15.1
49.5 440
22.7
54.0 480
11.4
18.9
7.6
15.1
11.4
7.6
3.8
7.
HP
Full Flow
Torque
18.0 160
9.0
0
0
Bar 0
PSI 0
69
1000
138
2000
207
3000
0
275
4000
Pressure
Response Times
PVP16 @ 1800 RPM
200
150
150
Time (millisec)
Time (millisec)
125
On-Stroking
100
75
50
125
On-Stroking
100
75
50
De-Stroking
De-Stroking
25
Bar
PSI
25
0
0
0
0
69
1000
138
2000
207
3000
275
4000
Bar
PSI
0
0
69
1000
Pressure
.6
1.9
.5
1.5
.4
1.1
.8
.4
Re
p
Com
mote
trok
ero S
-Z
ke
tro
.3
.2
.1
0
0
Bar 0
PSI 0
p-
rd
a
nd
Sta
69
1000
KW HP
2.2 3.0
S
ero
Power
Flow
2.3
m
Co
ow
l Fl
l
Fu
138
2000
138
2000
207
3000
275
4000
Pressure
PVP16
Approximate Case Drain Flow
@ 1800 RPM
LPM GPM
207
3000
1.9
2.5
1.5
2.0
1.1
1.5
.75
1.0
.37
.5
0
0
Bar 0
PSI 0
275
4000
PVP16
Compensated Power
@ 1800 RPM
69
1000
138
2000
207
3000
275
4000
Pressure
Pressure
hpm102-1.p65, lw, jk
15
80
Pressure
27.0 240
0
275
4000
207
3000
2H
138
2000
P
5H
12.4 110
45.0 400
36.0 320
3H
69
1000
HP
H
10
HP
HP
0
0
Bar 0
PSI 0
HP
3.8
24.8 220
HP
HP
5
3
Full Flow
Torque
37.0 330
Flow
26.5
Torque
61.9 550
15
10
18.9
Torque
7.
Flow
LPM GPM
6
22.7
Catalog HY28-2661-CD/US
Dimensional Data
Rear Ported Pump Dimensions
Pilot Dimensions
Pilot
Option
OMIT
N/A
32.00
(1.26)
173.23
(6.82)
38.10
(1.50)
28.44
(1.12)
144.53
(6.44)
NOTE:
Illustration shows Righthand (CW) rotation pump. Lefthand (CCW)
pumps will have inlet and outlet ports reversed with compensator on
outlet side.
CASE DRAIN PORT
SAE-6 STRAIGHT THREAD
(9/16-18 UNC)
107.95
(4.25)
39.62
(1.56)
ROTATION
ARROW
89.92
(3.54)
66.55
(2.62)
NAMEPLATE
IN
19.05 (.750)
19.02 (.749)
115.9 Nm
(1,030 IN-LBS)
MAX TORQUE
89.92
(3.54)
66.55
(2.62)
84.33
(3.32)
57.91
(2.28)
82.55 (3.250)
82.50 (3.248)
A
ALTERNATE
DRAIN PORT OR
CASE PRE-FILL PORT
SAE-6 STRAIGHT THREAD
(9/16-18 UNC)
Top View
12.70
(.50)
69.08
(2.72)
6.09
(.24)
44.45
(1.75)
C
OUTLET PORT SAE-12
STRAIGHT THREAD
O-RING PORT
(1-1/16-12 UN-2B REF.)
Rear View
31.75
(1.25)
31.75
(1.25)
OPTION B
SPLINE SHAFT
SAE A 9T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
58.2 Nm (517 IN-LBS)
174.75
(6.88)
OPTION C
SPLINE SHAFT
11T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
102.3 Nm (909 IN-LBS)
53.09
(2.09)
44.20
(1.74)
53.09
(2.09)
22.61 (.89)
REF.
COMPENSATED 94.23
PRESSURE
(3.71)
ADJUSTMENT
37.9 BAR (550 PSI)
78.99
PER TURN
(3.11)
4.78 (.188)
SAE KEY
21.16 (.833)
20.98 (.826)
89.92
(3.54)
61.47
(2.42)
D
6.35 (.25)
FLAT
91.95
(3.62)
199.64 (7.86)
MAX.
Front View
Side View
ADJ. MAX. VOLUME STOP
(1.6 CC/REV/TURN)
OPTION 2
hpm102-1.p65, lw, jk
16
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 2 & 4
Dimensions
Option
148.84
(5.86)
152.40
(6.00)
NOTE:
Illustration shows Righthand (CW) rotation pump.
Lefthand (CCW) pumps will have inlet and outlet ports
reversed with compensator on outlet side.
107.95
(4.25)
89.92
(3.54)
67.56
(2.66)
39.62
(1.56)
ROTATION
ARROW
IN
NAMEPLATE
83.33
(3.32)
57.91
(2.28)
19.05 (.750)
19.02 (.749)
CASE DRAIN
PORT
SEE TABLE
FOR SIZE
ALTERNATE DRAIN PORT
OR CASE PRE-FILL PORT
SEE TABLE FOR SIZE
12.70
(.50)
69.08
(2.72)
INLET PORT
6.09
(.24)
44.45
(1.75)
OUTLET PORT
Rear View
Top View
31.75
(1.25)
31.75
(1.25)
OPTION C
SPLINE SHAFT
11T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
102.3 Nm (909 IN-LBS)
OPTION B
SPLINE SHAFT
SAE A 9T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
58.2 Nm (517 IN-LBS)
174.75
(6.91)
53.09
(2.09)
44.20
(1.74)
22.61 (.89)
REF.
53.09
(2.09)
COMPENSATED 94.23
PRESSURE
(3.71)
ADJUSTMENT
37.9 BAR (550 PSI)
PER TURN
78.99
4.78 (.188)
(3.11)
SAE KEY
21.16 (.833)
20.98 (.826)
89.92
(3.54)
61.47
(2.42)
A
6.35 (.25)
FLAT
91.95
(3.62)
210.06 (8.27)
MAX.
Front View
Side View
ADJ. MAX.VOLUME STOP
(1.6 CC/REV/TURN)
OPTION 2
hpm102-1.p65, lw, jk
17
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 8 & 9 Dimensions
Pilot Dimensions
Shaft
Option
NOTE:
Illustration shows Righthand (CW) rotation pump. Lefthand (CCW)
pumps will have inlet and outlet ports reversed with compensator on
outlet side.
107.95
(4.25)
39.62
(1.56)
ROTATION
ARROW
Omit
B, C
82.55/82.50
(3.250/3.248)
6.10
(.24)
53.09
(2.09)
3/8"
80.00/79.95
(3.149/3.147)
7.24
(.285)
55.63
(2.19)
10mm
89.92
(3.54)
67.56
(2.66)
IN
89.92
(3.54)
67.56
(2.66)
83.33
(3.32)
57.91
(2.28)
19.05 (.750)
19.02 (.749)
INLET PORT
12.70
(.50)
69.08
(2.72)
Rear View
44.45
(1.75)
35.31
(1.39)
Top View
31.75
(1.25)
31.75
(1.25)
6 mm KEY
18.01 (.7087)
17.99 (.7083)
OPTION C
SPLINE SHAFT
11T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
102.3 Nm (909 IN-LBS)
OPTION B
SPLINE SHAFT
SAE A 9T 16/32 DP
30 INVOLUTE SPLINE
MAX TORQUE =
58.2 Nm (517 IN-LBS)
OUTLET PORT
OPTION K
M6 THREAD
MAX TORQUE =
115.9 Nm (1,030 IN-LBS)
C
175.75
(6.91)
COMPENSATED 94.23
PRESSURE
(3.71)
ADJUSTMENT
37.9 BAR (550 PSI)
PER TURN
78.99
(3.11)
4.78 (.188)
SAE KEY
21.16 (.833)
20.98 (.826)
148.84
(5.86)
6.35 (.25)
FLAT
44.20
(1.74)
22.61 (.89)
REF.
20.50 (.807)
20.22 (.796)
91.95
(3.62)
89.92
(3.54)
61.47
(2.42)
CLEARANCE FOR D
MOUNTING BOLTS
210.06 (8.27)
MAX.
Front View
Side View
ADJ. MAX.VOLUME STOP
(1.6 CC/REV/TURN)
OPTION 2
hpm102-1.p65, lw, jk
18
Catalog HY28-2661-CD/US
Dimensional Data
Thru-Shaft Pump Dimensions
148.84
(5.86)
152.40
(6.00)
148.84
(5.86)
148.84
(5.86)
NOTES:
175.51 (6.91)
REF. TO PILOT FACE
8.89
(.35)
Drain Port
SAE-6 Straight Thread
(9/16-18UNC)
SAE-6 Straight Thread
(9/16-18UNC)
ISO 6149-6
M16 x 1.50
3/8" - BSPP
107.95
(4.25)
ROTATION
ARROW
39.62
(1.56)
CASE DRAIN
PORT SEE TABLE
FOR SIZE
4
IN
NAMEPLATE
19.05 (.750)
19.02 (.749)
D
82.55 (3.250)
82.50 (3.248)
12.70
(.50)
67.56
(2.66)
6.09
(.24)
44.45
(1.75)
Top View
COMPENSATED
PRESSURE
ADJUSTMENT
37.9 BAR (550 PSI)
PER TURN
4.78 (.188)
SAE KEY
84.33
(3.32)
21.16 (.833)
20.98 (.826)
INLET PORT
OUTLET PORT
Rear View
Side View
6A1
41.28 (1.63)
50.83/50.85 (2.001/2.002)
57.66 (2.27)
5/1618UNC2B
200.91 (7.91)
6A2
53.19 (2.09)
82.58/82.60 (3.251/3.252)
64.01 (2.52)
3/816UNC2B
207.26 (8.16)
6A4
53.19 (2.09)
82.58/82.60 (3.251/3.252)
N/A
3/816UNC2B
207.26 (8.16)
9A2
53.19 (2.09)
82.58/82.60 (3.251/3.252)
64.01 (2.52)
M10 x 1.50
207.26 (8.16)
9A4
53.19 (2.09)
82.58/82.60 (3.251/3.252)
N/A
M10 x 1.50
207.26 (8.16)
hpm102-1.p65, lw, jk
19
Catalog HY28-2661-CD/US
Dimensional Data
NOTES:
1. Righthand (CW) rotation pump shown below. Lefthand (CCW) pumps will have
compensator on opposite side.
2. When controlling pump compensator pressure with remote relief valve, remote relief
valve must be capable of passing 1.89 LPM (.5 GPM).
3. Remote compensator option M, ME & A available on pumps with
any port location.
1/4"
BSPP
NAMEPLATE
ROTATION
ARROW
ADAPTOR FITTING
SUPPLIED WITH
9 OPTION
IN
22.86
(.90)
130.56
(5.14)
REF
65.79
(2.59)
ISO 6149-4
(M12X1.5)
44.19
(1.74)
65.79
(2.59)
ADAPTOR FITTING
SUPPLIED WITH
PORT OPTION 8
PUMPS
INTERNAL ORIFICE
INSTALLED ON
OPTIONS ME, A & C
17.02
(.67)
130.56
(5.14)
REF
102.62
(4.04)
Top View
53.34
(2.10)
REF.
45.72
(1.80)
REF.
FOR M, ME, A,
H & C OPTION
FOR A & C OPTION
COMPENSATED
PRESSURE ADJUSTMENT
64.8 BAR (940 PSI)
PER TURN
25.40
(1.00)
DIFFERENTIAL
ADJUSTMENT
(INCLUDED ON A
& C OPTION)
27.5 BAR (400 PSI)
PER TURN
130.56
(5.14)
77.72
(3.06)
130.56
(5.14)
CL
OF PUMP
Side View
Front View
hpm102-1.p65, lw, jk
20
Catalog HY28-2661-CD/US
Dimensional Data
Power (Torque) Control Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) rotation rear ported pump shown. Counterclockwise (CCW)
pumps will have inlet and outlet ports reversed with compensator and power
block on outlet side.
2. Power control shown on rear ported pump. Also available on side ported or thrushaft option pumps.
IN
112.01
(4.41)
Top View
TORQUE LIMIT ADJUSTMENT
CONTROL OPTION H
SENSITIVITY APPROX.
21.4 Nm (190 IN-LB)
PER TURN
103.12
(4.06)
44.19
(1.74)
135.89
(5.35)
29.72
(1.17)
Front View
Side View
hpm102-1.p65, lw, jk
21
Catalog HY28-2661-CD/US
Technical Information
Performance Information
Series PVP 23/33 Pressure Compensated,
Variable Volume, Piston Pumps
Features
High Strength Cast-Iron Housing for Reliability
and Quiet Operation
Vickers Porting Interchange
Optional Inlet/Outlet Locations for Ease
of Installation
Replaceable Bronze Port Plate
Replaceable Piston Slipper Plate
Thru-Shaft Capability SAE AA, A and
B Pilots Offered
Low Noise Levels
Fast Response Times
Metric Pilot Shaft and Ports Available
Specifications
Pressure Ratings
Controls
Pressure Compensation
Remote Pressure Compensation
Load Sensing
Torque (Power) Limiting
Adjustable Maximum Volume Stop
Low Pressure Standby
Outlet Port:
Inlet Port:
Schematic Symbol
(Basic Pump)
Filtration:
Mounting:
Displacement
cc/rev
(In3/rev)
Pump Delivery
@ 21 bar (300 PSI)
in LPM (GPM)
1200 RPM
1800 RPM
34 bar
69 bar
138 bar
207 bar
248 bar
(500 PSI) (1000 PSI) (2000 PSI) (3000 PSI) (3600 PSI)
Input Power At
1800 RPM, Max.
Displacement &
248 bar (3600 PSI)
PVP23
23.0 (1.4)
28.0 (7.4)
42.0 (11.1)
61 (57)
64 (59)
67 (63)
69 (65)
70 (65)
PVP33
33.0 (2.0)
39.4 (10.4)
59.0 (15.6)
64 (59)
66 (59)
68 (62)
70 (64)
71 (65)
hpm102-1.p65, lw, jk
22
Catalog HY28-2661-CD/US
Ordering Information
PVP
Multiple
Pumps
Pump DisplaceVariable
ment Pressure
Piston
Range
Code
CM3/REV
(In3/Rev.)
23
23 (1.4)
33
33 (2.0)
Shaft
Port &
Flange
Sizes
Rotation Volume
Stop
Option
ThruShaft
Threads
ThruShaft
Option
Control
Option
Seals
Code
Painting
Omit
P
No Paint
Paint
Code
Code
Omit
Multiple Pumps
Factory Mounted
to Rear of
Another Pump
Code
Code
Rotation*
(CW)
Single Pump
Omit
V
Multiple
Pumps
Seals
Nitrile
Fluoroelastomers*
* FLUOROELASTOMERS
are available under various
registered trademarks, including
FLUOROCARBON (a
registered trademark of DuPont)
and FLUOREL (a registered
trademark of 3M).
(CCW)
* Viewed from
shaft end.
Pressure Range*
10
20
30
36
Code
Thru-Shaft
Threads
Omit
No Thru-Shaft
6*
UNC
9**
Metric
Code
Omit
Paint
Shaft Option
Pilot
Omit*
SAE B
B*
SAE B
Code
SAE B
Omit
SAE B
25mm Keyed
Omit
Type
SAE
Pump Factory
Mounted on Rear
Code
Control Options
Omit
Pressure Compensated
**M
**ME
*C
Pressure Compensated
and Power
*Specify HP, RPM & comp setting when
ordering or will get default.
**"M" (May be remotely controlled)
"ME" (Requires external pilot)
Metric
Code
Single Pump
*H
Ports
Multiple Pumps
Omit
Thru-Shaft Option
No Thru-Shaft
A1*
A2*
Location
SAE
Side - Flange
(Inch Threads)
A4
A5
SAE
B1*
ISO
6149
B2*
BSPP
Side - Flange
(Metric Threads)
Side - Flange
(Metric Threads)
B3
B4
hpm102-1.p65, lw, jk
23
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
PVP33 @ 1800 RPM
68.2
18
80
60.6
16
KW
HP
23.9 32.0
70
53.0
14
20.9 28.0
60
45.4
12
37.9
10
30.3
15.1
Fl
ow
Fu
ll
11.9 16.0
20
90
68.2
18
80
60.6
16
70
53.0
14
Volumetric Efficiency
60
45.4
12
37.9
10
30.3
Overall Efficiency
Flow
50
14.9 20.0
at
17.9 24.0
er
22.7
Flow
75.7
8.9
12.0
22.7
6.0
8.0
15.1
KW
HP
29.8 40.0
pu
tP
ow
50
Overall Efficiency
100
In
In
7.6
wer
3.0
sated Po
Compen
0
0
Bar 0
PSI 0
69
1000
138
2000
207
3000
0
275
4000
7.6
4.0
0
0
Bar 0
PSI 0
Q x (PSI)
1714
23.9 32.0
17.9 24.0
11.9 16.0
6.0
69
1000
138
2000
207
3000
8.0
0
275
4000
Pressure
WHERE:
Q = Actual Output Flow in GPM
PSI = Pressure At Pump Outlet
CHp = Input Horsepower @ Full Compensation @ 1800
RPM (from graph read at operating pressure)
NOTE: The efficiencies and data in the graph are good only for
pumps running at 1800 RPM and stroked to maximum. To
calculate approximate horsepower for the other conditions,
use the following formula:
tP
ra
lo
wer
Compensated Po
Pressure
HP =
pu
e
ow
tF
lF
ul
+ (CHp)
PSI
6
.28
.14
Inlet Pressure
Vacuum
PVP 23/33
Inlet Characteristics at Full Displacement
bar
.41
bar In-Hg
0
0
.17
.34
10
.51
15
.68
20
DO NOT OPERATE
IN THIS REGION
0
500
1000
1500
2000
Power
90
Volumetric Efficiency
Flow
20
Efficiency - %
75.7
LPM GPM
Power
100
Flow
Efficiency - %
LPM GPM
2500
3000
90.8
24.0
75.7
20.0
60.6
16.0
45.5
12.0
30.3
8.0
15.2
4.0
PVP 33
PVP 23
500
1000
1500
2000
2500
3000
hpm102-1.p65, lw, jk
24
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
Power Control
700
22.7
59.1
525
15.1
39.4
350
7.6
19.7
175
10
HP
69
1000
138
2000
0
275
4000
207
3000
Flow
HP
7.5
0
0
Bar 0
PSI 0
137.8 1225
45.4
12
118.1 1050
37.9
10
30.3
22.7
15.1
7.6
98.4
875
78.8
700
59.1
525
39.4
350
19.7
175
Pressure
0
0
Bar 0
PSI 0
69
1000
138
2000
0
275
4000
207
3000
Pressure
Response Times
PVP 23/33 @ 1800 RPM
120
100
100
Time (millisec)
Time (millisec)
On-Stroking
80
60
40
De-Stroking
80
60
40
De-Stroking
20
20
Bar
PSI
On-Stroking
69
1000
0
0
138
2000
207
3000
Bar
PSI
275
4000
0
0
3.4
.9
KW HP
3.0 4.0
3.0
.8
2.6 3.5
2.7
.7
2.3
.6
1.9
.5
1.5
.4
1.1
.3
.8
.2
.4
.1
0
0
Bar 0
PSI 0
hpm102-1.p65, lw, jk
te
e
trok
ro S
Ze
p-
om
dC
ar
and
PVP 23/33
Compensated Power
@ 1800 RPM
1.5 2.0
1.1 1.5
St
.75 1.0
low
.37
ll F
Fu
69
1000
275
4000
1.9 2.5
m
Co
mo
207
3000
2.2 3.0
ke
tro
S
ero
Power
Flow
PVP 23/33
Approximate Case Drain Flow
@ 1800 RPM
LPM GPM
Re
138
2000
Pressure
Pressure
p-
69
1000
138
2000
207
3000
.5
0
0
Bar 0
PSI 0
275
4000
69
1000
138
2000
207
3000
275
4000
Pressure
Pressure
25
Torque
78.8
Torque
14
30.3
53.0
HP
30
HP
25
HP
20
875
Nm In-Lbs
157.5 1400
H
15
98.4
HP
10
HP
7.5
10
H
20
37.9
w
lo
l F que
l
Fu or
T
LPM GPM
60.6 16
Nm In-Lbs
118.1 1050
Fu
To ll F
rq low
ue
H
15
Flow
LPM GPM
45.4 12
Catalog HY28-2661-CD/US
Dimensional Data
Rear Ported Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW) pumps have inlet and outlet ports reversed.
2. Pump shown with standard pressure compensator (control option omit).
122.94
(4.84)
69.09
(2.72)
41.91
(1.65)
107.19
(4.22)
76.20
(3.00)
33.27
(1.31)
PRESSURE
COMPENSATOR
ADJUSTMENT
SENSITIVITY:
37.9 BAR (550 PSI)
PER TURN
107.19
(4.22)
76.20
(3.00)
33.27
(1.31)
26.67
(1.05)
101.60 (4.000)
101.55 (3.998)
53.34
(2.10)
23.88
(.94)
49.53
(1.95)
9.40
(.37)
12.70
(.50)
Top View
38.10
(1.50)
58.67
(2.31)
SHAFT OPTION
OMIT
(SAE B)
22.23 (.875)
22.20 (.874)
MAX TORQUE
208.6 Nm
(1,852 IN-LBS)
IN
Rear View
OUT
45.97
( 1.81)
25.40 (1.00)
25.37 (.999)
SHAFT OPTION C
(SAE BB)
MAX TORQUE =
336.0 Nm (2,987 IN-LBS)
SHAFT OPTION B
(SAE B)
13 TEETH 16/32 PITCH
30 INVOLUTE SPLINE
MAX TORQUE = 208.4 Nm (1,852 IN-LBS)
192.02
(7.56)
45.97
( 1.81)
27.94 (1.10)
28.19 (1.11)
SHAFT OPTION D
(SAE BB)
15 TEETH 16/32 PITCH
30 INVOLUTE SPLINE
MAX TORQUE = 336.0 Nm (2,987 IN-LBS)
72.90
(2.87)
21.59
(.85)
42.42
(1.67)
REF.
72.90
(2.87)
ROTATION
ARROW
63.50
(2.50)
.250
SAE KEY
3.81
(.15)
102.62
(4.04)
82.55
(3.25)
88.39
(3.48)
25.06 (.987)
24.92 (.981)
71.12 79.50
(2.80) (3.13)
76.96
(3.03)
Side View
49.28
(1.94)
221.74 (8.73)
MAX
26.67
(1.05)
Front View
26
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 2 & 3 Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
Port Location
Inlet and Outlet Port
1-1/4"
SAE 4-Bolt Flange
148.84
7/16-14 Threads Standard
(3.10)
Pressure Series (Code 61)
Option
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW) pumps have inlet
and outlet ports reversed.
122.94
(4.84)
152.40
(3.22)
107.19
(4.22)
69.09
(2.72)
41.91
(1.65)
PRESSURE
COMPENSATOR
ADJUSTMENT
SENSITIVITY:
37.9 BAR (550 PSI)
PER TURN
21.59
(.85)
107.19
(4.22)
A
26.67
(1.05)
82.55
(3.25)
53.34
(2.10)
101.60 (4.000)
101.55 (3.998)
IN
OUT
23.88
(.94)
SHAFT OPTION
OMIT
(SAE B)
22.23 (.875)
22.20 (.874)
MAX TORQUE
208.6 Nm
(1,852 IN-LBS)
9.40
(.37)
12.70
(.50)
DRAIN PORT
SAE-8 STRAIGHT THREAD
(3/4-16UN)
Top View
38.10
(1.50)
58.67
(2.31)
Rear View
41.15
(1.62)
45.97
( 1.81)
SHAFT OPTION D
(SAE BB)
15 TEETH 16/32 PITCH
30 INVOLUTE SPLINE
MAX TORQUE = 336.0 Nm (2,987 IN-LBS)
72.90
(2.87)
21.59
(.85)
42.42
(1.67)
REF.
63.50
(2.50)
72.90
(2.87)
102.62
(4.04)
82.55
(3.25)
.250
SAE KEY
3.81
(.15)
45.97
( 1.81)
27.94 (1.10)
28.19 (1.11)
25.40 (1.00)
25.37 (.999)
SHAFT OPTION C
(SAE BB)
MAX TORQUE =
336.0 Nm (2,987 IN-LBS)
SHAFT OPTION B
(SAE B)
13 TEETH 16/32 PITCH
30 INVOLUTE SPLINE
MAX TORQUE = 208.4 Nm (1,852 IN-LBS)
215.65
(8.49)
ROTATION ARROW
88.39
(3.48)
25.06 (.987)
24.92 (.981)
71.12 79.50
(2.80) (3.13)
76.96
(3.03)
49.28
(1.94)
221.74 (8.73)
MAX
DRAIN PORT
SAE-8 STRAIGHT THREAD
(3/4-16UN)
26.67
(1.05)
Front View
Side View
27
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 8 & 9 Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW)
rotation pump will have inlet and outlet ports reversed.
Omit
B, C, D
101.60/101.55
(4.000/3.998)
9.40
(.37)
72.90
(2.87)
12.70
(.50)
100.00/99.95
(3.937/3.935)
9.14
(.36)
69.85
(2.75)
12mm
69.09
(2.72)
41.91
(1.65)
Pilot Dimensions
Shaft
Option
107.19
(4.22)
78.74
(3.10)
PRESSURE
COMPENSATOR
ADJUSTMENT
SENSITIVITY:
37.9 BAR (550 PSI)
PER TURN
107.19
(4.22)
78.74
(3.10)
26.67
(1.05)
21.59
(.85)
53.34
(2.10)
IN
OUT
22.23 (.875)
22.20 (.874)
23.88
(.94)
B
DRAIN PORT
OPTION 8
ISO 6149-8
(M18X1.5)
OPTION 9
1/2" BSPP
ROTATION ARROW
12.70
(.50)
Top View
38.10
(1.50)
Rear View
58.67
(2.31)
M10 THREAD
52.83
(2.08)
215.65
(8.49)
63.50
(2.50)
102.62
(4.04)
82.55
(3.25)
.250
SAE KEY
3.81
(.15)
C
21.59
(.85)
42.42
(1.67)
REF.
88.34
(3.48)
25.06 (.987)
24.92 (.981)
71.12
(2.80)
76.96
(3.03)
CLEARANCE FOR D
MOUNTING BOLTS
174.50
(6.87)
49.28
(1.94)
ALTERNATE DRAIN
OPTION 8
ISO 6149-8 (M18X1.5)
OPTION 9 1/2" BSPP
221.74 (8.73)
MAX
26.67
(1.05)
Front View
Side View
ADJ. MAX.VOLUME STOP
(3.3CC/REV./TURN)
OPTION 2
hpm102-1.p65, lw, jk
28
79.50
(3.13)
Catalog HY28-2661-CD/US
Dimensional Data
Thru-Shaft Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
13.5 Nm
(120 IN-LB)
TORQUE
E
F
G
Top View
174.50
(6.87)
206.76
(8.14)
Rear View
Side View
Thru-Shaft Options
Variation
6A1
232.16 (9.14)
50.83/50.85 (2.001/2.002)
41.28 (1.63)
5/16-18UNC-2B
6A2
238.51 (9.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
3/8-16UNC-2B
6A4
238.51 (9.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
3/8-16UNC-2B
6A5
238.51 (9.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
6B1
252.48 (9.94)
101.63/101.65 (4.001/4.002)
6B2
252.48 (9.94)
101.63/101.65 (4.001/4.002)
6B3
252.48 (9.94)
6B4
38.10 (1.50)
69.09 (2.72)
44.45 (1.75)
75.44 (2.97)
31.75 (1.25)
N/A
3/8-16UNC-2B
31.75 (1.25)
N/A
73.03 (2.88)
1/2-13UNC-2B
58.67 (2.31)
89.41 (3.52)
73.03 (2.88)
1/2-13UNC-2B
45.97 (1.81)
89.41 (3.52)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
41.15 (1.62)
N/A
252.48 (9.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
45.97 (1.81)
N/A
9A4
238.51 (9.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
M10 x 1.50
31.75 (1.25)
N/A
9A5
238.51 (9.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
M10 x 1.50
31.75 (1.25)
N/A
9B3
252.48 (9.94)
101.63/101.65 (4.001/4.00)
73.03 (2.88)
M12 x 1.75
41.15 (1.62)
N/A
9B4
252.48 (9.94)
101.63/101.65 (4.001/4.00)
73.03 (2.88)
M12 x 1.75
45.97 (1.81)
N/A
hpm102-1.p65, lw, jk
29
Catalog HY28-2661-CD/US
Dimensional Data
NOTES:
1. Righthand (CW) rotation rear ported pump shown. Lefthand (CCW) pumps will have
inlet and outlet ports reversed.
2. When controlling pump compensator pressure with remote relief valve, size relief
valve to pass a minimum of 1.89 LPM (.5 GPM).
3. Remote compensator shown on rear ported pump. Also available on side ported or
thru-shaft option pumps.
122.94
(4.84)
1/4"
BSPP
INTERNAL ORIFICE
INSTALLED ON CONTROL
OPTIONS ME & A
ADAPTOR FITTING
SUPPLIED WITH
9 OPTION
22.85 (.90)
139.95
(5.51)
REF
21.59
(.85)
ISO 6149-4
(M12X1.5)
17.02 (.67)
Top View
139.95
(5.51)
REF
21.59
(.85)
72.90
(2.87)
65.28
(2.57)
25.40
(1.00)
PRESSURE COMPENSATOR
ADJUSTMENT:
64.8 BAR (940 PSI) PER TURN
139.95
(5.51)
DIFFERENTIAL PRESSURE
ADJUSTMENT SENSITIVITY:
27.5 BAR (400 PSI) PER TURN
(INCLUDED ON A CONTROL
OPTION)
87.12
(3.43)
ROTATION
ARROW
Front View
Side View
hpm102-1.p65, lw, jk
30
Catalog HY28-2661-CD/US
Dimensional Data
Power (Torque) Control Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) rotation rear ported pump shown. Lefthand (CCW) pumps will
have inlet and outlet ports reversed.
2. Power control shown on rear ported pump. Also available on side ported or
thru-shaft option pumps.
41.91
(1.65)
105.92
(4.17)
Top View
122.68
(4.83)
74.42
(2.93)
127.51
(5.02)
OPTIONAL REMOTE
COMPENSATOR CONTROL
PORT FOR CONTROL
OPTION H
142.24
(5.60)
71.88
(2.83)
27.94
(1.10)
Side View
Front View
hpm102-1.p65, lw, jk
31
Catalog HY28-2661-CD/US
Technical Information
Performance Information
Series PVP 41/48 Pressure Compensated,
Variable Volume, Piston Pumps
Features
High Strength Cast-Iron Housing for Reliability
and Quiet Operation
Vickers Porting Interchange
Optional Inlet/Outlet Locations for Ease
of Installation
Replaceable Bronze Port Plate
Replaceable Piston Slipper Plate
Thru-Shaft Capability SAE AA, A or B Pilots
Low Noise Levels
Fast Response Times
Metric Pilot Shaft and Ports Available
Specifications
Pressure Ratings
Outlet Port:
248 bar (3600 PSI) Continuous
(P1)
310 bar (4500 PSI) Peak (P3)
Controls
Pressure Compensation
Remote Pressure Compensation
Load Sensing
Torque (Power) Limiting
Adjustable Maximum Volume Stop
Low Pressure Standby
Hi/Lo Torque (Power) Limiting
Inlet Port:
Schematic Symbol
(Basic Pump)
Mounting:
Filtration:
Pump
Model
Displacement
cc/rev
(In3/rev)
1200 RPM
1800 RPM
PVP41
41.0 (2.5)
49.2 (13.0)
73.8 (19.5)
68 (60)
70 (61)
73 (65)
74 (67)
75 (69)
PVP48
48.0 (2.9)
57.6 (15.2)
86.4 (22.8)
69 (60)
71 (62)
73 (65)
75 (68)
76 (69)
hpm102-1.p65, lw, jk
32
Catalog HY28-2661-CD/US
Ordering Information
PVP
Multiple
Pumps
Code
Omit
Code
Pump DisplaceVariable
ment Pressure
Piston
Range
Code
CM3/REV
(In3/Rev.)
41
41 (2.5)
48
48 (2.9)
Shaft
Port
Option
Code
Rotation*
(CW)
Multiple Pumps
Factory Mounted
to Rear of
Another Pump
Pressure Range*
17-69 bar (250-1000 PSI)
Control
Option
Seals
Omit
V
(CCW)
Code
Thru-Shaft Threads
Omit
No Thru-Shaft
6*
UNC
9**
Metric
Code
Painting
Omit
P
No Paint
Paint
36
Nitrile
Fluoroelastomer*
Code
Omit
* Available with 2 or 3
port option.
** Available with 8 or 9
port option.
Code
Shaft
Pilot
Omit*
SAE B
Code
SAE B
SAE B
SAE B
25mm Keyed
Omit
2
Multiple
Pumps
Seals
Paint
* FLUOROELASTOMERS
are available under various
registered trademarks,
including
FLUOROCARBON (a
registered trademark of
DuPont) and FLUOREL (a
registered trademark of
3M).
20
ThruShaft
Option
Code
30
B*
ThruShaft
Threads
* Viewed from
shaft end.
Single Pump
10
Rotation Volume
Stop
Option
Code
Pump Factory
Mounted on Rear
Control Option
Omit
Standard Pressure
Compensated
**M
Remote Pressure
**ME
Remote Pressure
H*
HLM*
HLA*
Metric
Multiple Pumps
Single Pump
Type
Description
Omit
Thru-Shaft Option
No Thru-Drive
A1*
A2*
Omit
SAE
SAE
A4
SAE
A5
ISO
6149
Side - Flange
(Metric Threads)
Side - Flange
(Metric Threads)
B1*
B2*
B3
B4
BSPP
hpm102-1.p65, lw, jk
33
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
70
60.6
16
Flow
45.4
34.1
50
33.6 45.0
22.7
22.4 30.0
12
ull
60
11.2 15.0
F
11.4
Compensa
0
0
Bar 0
PSI 0
69
1000
ted Power
138
2000
207
3000
0
275
4000
68.1
18
60.6
16
45.4
12
34.1
50
Po
w
Flo
70
21
Efficiency
Flow
33.6 45.0
r
we
80
79.5
22.7
11.4
0
0
Bar 0
PSI 0
lo
lF
11.2 15.0
Power
Compensated
69
1000
138
2000
50
34.1
22.7
11.4
22.4 30.0
80
68.1
18
60.6
16
45.4
12
34.1
22.7
11.4
70
60
Po
11.2 15.0
lo
lF
l
Fu
21
50
we
79.5
ed Power
Compensat
0
0
Bar 0
PSI 0
69
1000
138
2000
207
3000
0
275
4000
0
0
Bar 0
PSI 0
Pressure
.27
.68
10
1.03
15
1.38
20
DO NOT OPERATE
IN THIS REGION
0
hpm102-1.p65, lw, jk
1000
Power
Compensated
69
1000
138
2000
207
3000
0
275
4000
.14
2
bar In-Hg
0
0
.34
11.2 15.0
Q x (PSI)
Inlet Pressure
Vacuum
.41
22.4 30.0
PVP 41/48
Inlet Characteristics at Full Displacement
PSI
8
33.6 45.0
WHERE:
+ (CHp)
1714
Actual GPM is directly proportional to drive speed and maximum
volume setting. Flow loss, however, is a function of pressure
only.
bar
.55
cy
Efficien
Pressure
NOTE: The efficiencies and data in the graph are good only for
pumps running at 1200 or 1800 RPM and stroked to maximum.
To calculate approximate horsepower for the other conditions,
use the following formula:
HP =
KW
HP
44.8 60.0
12
Flow
90
we
45.4
33.6 45.0
Flow
Po
16
ow
60
60.6
0
275
4000
Fl
70
207
3000
ll
18
22.4 30.0
Fu
68.1
ncy
Efficie
Flow
80
LPM GPM
90.9 24
100
Efficiency - %
21
KW
HP
44.8 60.0
Power
79.5
Flow
Efficiency - %
90
er
Pressure
LPM GPM
90.9 24
Po
l
Fu
Pressure
100
KW
HP
44.8 60.0
Power
18
90
Power
68.1
ncy
Efficie
Flow
80
LPM GPM
90.9 24
100
Efficiency - %
21
KW
HP
44.8 60.0
Power
79.5
Flow
Efficiency - %
90
60
LPM GPM
90.9 24
100
2000
3000
LPM GPM
151.5 40.0
132.5
PVP 41/48
Flow vs. Shaft Speed
35.0
113.6
30.0
94.7
25.0
75.7
20.0
56.8
15.0
37.9
10.0
18.9
5.0
P4
PV
P4
PV
1000
2000
3000
34
Catalog HY28-2661-CD/US
Performance Data
Typical Performance Data - Fluid: Standard Hydraulic Oil 100 SSU @ 49C (120F)
Power Control
56.3
69
1000
138
2000
0
275
4000
207
3000
112.5 1000
low
ll F e
Fu orqu
T
18.9
500
0
0
Bar 0
PSI 0
168.8 1500
56.3
69
1000
Pressure
138
2000
0
275
4000
207
3000
Pressure
Response Times
PVP 41/48 @ 1800 RPM
300
250
250
Time (millisec)
Time (millisec)
200
150
On-Stroking
100
0
0
0
150
On-Stroking
100
De-Stroking
50
Bar
PSI
200
69
1000
138
2000
207
3000
De-Stroking
50
275
4000
Bar
PSI
0
0
69
1000
Pressure
KW HP
4.5 6.0
6.1 1.6
5.3 1.4
ke
Flow
-Z
3.0
.8
2.3
.6
1.5
.4
.8
.2
0
0
Bar 0
PSI 0
e
ot
Re
r
da
n
ta
69
1000
er
Co
ke
ro
St
Power
ro
St
er
3.8 1.0
207
3000
275
4000
Pressure
PVP 41/48
Approximate Case Drain Flow
@ 1800 RPM
LPM GPM
4.5 1.2
138
2000
-Z
3.7
5.0
3.0
4.0
2.2
3.0
1.5
2.0
.75
1.0
Compensated Power
@ 1800 RPM
Co
Fu
ll
138
2000
w
Flo
207
3000
0
0
Bar 0
PSI 0
69
1000
138
2000
207
3000
275
4000
Pressure
275
4000
Pressure
hpm102-1.p65, lw, jk
35
500
0
Torque
10
Flow
Flow
37.9
225.0 2000
55 HP
1000
P
50 H
P
45 H
HP
40
112.5
HP
15
HP
56.8
35
1500
HP
25
168.8
30
20
75.7
HP
0
0
Bar 0
PSI 0
2000
Nm In-Lbs
281.3 2500
Flow
20
225.0
low
ll F e
Fu orqu
T
LPM GPM
94.6 25
H
15
HP
HP
45 HP
P
40 H
HP
35
30
25
18.9
10
HP
37.9
20
15
56.8
Flow
H
15
20
10 H
75.7
Nm In-Lbs
281.3 2500
Torque
LPM GPM
94.6 25
Catalog HY28-2661-CD/US
Dimensional Data
Rear Ported Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW) rotation
pump will have inlet and outlet ports reversed.
2. Pump shown with standard pressure compensator
(control option omit).
71.12
(2.80)
APPROX. @
FULL PRESS
72.89
(2.87)
PRESSURE COMPENSATOR
ADJUSTMENT SENSITIVITY:
APPROX. 37.8 BAR (550 PSI)
PER TURN
44.45
(1.75)
27.18
(1.07)
SHAFT OPTION OMIT
(SAE B)
MAXIMUM TORQUE
= 208.1 Nm
(1,850 IN-LBS)
72.89
(2.87)
97.79
(3.85)
93.22
(3.67)
22.23 (.875)
22.20 (.874)
95.50
(3.76)
107.44
(4.23)
DRAIN PORT
SAE -10 STRAIGHT
THREAD PORT
15.49
(.61)
41.15
(1.62)
47.75
(1.88)
Front View
124.21
(4.89)
Top View
.250 SAE KEY
45.97
(1.81)
45.97
(1.81)
28.14 (1.10)
27.89 (1.09)
SHAFT OPTION D
(SAE BB) 15 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE = 336.4 Nm (2,990 IN-LBS)
SHAFT OPTION C
(SAE BB)
1" DIA. REF.
MAX TORQUE =
336.4 Nm (2,990 IN-LBS)
SHAFT OPTION B
(SAE B) 13 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE = 208.1 Nm (1,850 IN-LBS)
88.14
(3.47)
44.45
(1.75)
220.22
(8.67)
88.14
(3.47)
44.45
(1.75)
.250
SAE KEY
ROT
68.58
(2.70)
25.07 (.987)
24.82 (.977)
OUT
IN
101.60 (4.00)
101.55 (3.99)
Side View
Rear View
hpm102-1.p65, lw, jk
36
55.63
(2.19)
75.95
(2.99)
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 2 & 3 Dimensions
Option
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW) rotation
pump will have inlet and outlet ports reversed.
Port Sizes
Inlet
Outlet
1-1/2" SAE 4-Bolt Flange
1" SAE 4-Bolt Flange
1/2-13 Thread Standard
3/8-16 Thread Standard
Pressure Series (Code 61) Pressure Series (Code 61)
SAE-24 Straight Thread
(1-7/8-12UN-2B)
SHAFT OPTION
OMIT
(SAE B)
MAXIMUM TORQUE
= 208.1 Nm
(1,850 IN-LBS)
71.12
(2.80)
27.18
(1.07)
72.89
(2.87)
44.45
(1.75)
99.82
(3.93)
72.89
(2.87)
97.79
(3.86)
93.22
(3.67)
95.50
(3.76)
107.44
(4.23)
25.40
(1.00)
22.23 (.875)
22.20 (.874)
99.82
(3.93)
DRAIN PORT
SAE-10 STRAIGHT
THREAD PORT
15.49
(.61)
47.75
(1.88)
87.38
(3.44)
25.40
(1.00)
DRAIN PORT
SAE-10
7/8-14 THREAD
124.21
(4.89)
176.28
(6.94)
Front View
Top View
41.15
(1.62)
45.97
(1.81)
45.97
(1.81)
28.14 (1.10)
27.89 (1.09)
SHAFT OPTION B
(SAE B) 13 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE = 208.1 Nm (1,850 IN-LBS)
58.67
(2.31)
9.40
(.37)
SHAFT OPTION C
(SAE BB)
1" DIA. REF.
MAX TORQUE =
336.4 Nm (2,990 IN-LBS)
SHAFT OPTION D
(SAE BB) 15 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE = 336.4 Nm (2,990 IN-LBS)
240.79
(9.48)
191.01
(7.52)
95.25
(3.75)
95.25
(3.75)
.250
SAE KEY
84.84
(3.34)
68.58
(2.70)
IN
OUT
25.07 (.986)
24.82 (.976)
87.38
(3.44)
176.28
(6.94)
Side View
hpm102-1.p65, lw, jk
84.84
(3.34)
ROT
101.60 (4.00)
101.55 (3.99)
37
107.69
(4.24)
107.69
(4.24)
Rear View
Parker Hannifin Corporation
Hydraulic Pump Division
Marysville, Ohio USA
Catalog HY28-2661-CD/US
Dimensional Data
Side Ported Options 8 & 9 Dimensions
Shaft Option
Omit
B, C, D
NOTES:
1. Righthand (CW) rotation pump shown. Lefthand (CCW) rotation
pump will have inlet and outlet ports reversed.
71.12
(2.80)
27.18
(1.07)
Pilot Dimensions
A
B
101.60/101.55
9.40
(4.000/3.998)
(.37)
100.00/99.95
9.14
(3.937/3.935)
(.36)
Inlet Port
1-1/2" SAE 4-Bolt Flange
M12 Thread Standard
Pressure Series (Code 61)
C
D
72.90 12.70
(2.87)
(.50)
69.85 11.94
(2.75)
(.47)
Outlet Port
1" SAE 4-Bolt Flange
M10 Thread Standard
Pressure Series (Code 61)
44.45
(1.75)
93.22
(3.67)
97.79
(3.86)
95.50
(3.76)
107.44
(4.23)
25.40
(1.00)
22.23 (.875)
22.20 (.874)
OPTIONAL
DRAIN PORT
OPTION 8
ISO 6149
(M22X1.5)
15.49
OPTION 9 (.61)
3/4" BSPP
41.15
(1.62)
87.38
(3.44)
47.75
(1.88)
CLEARANCE FOR
D MOUNTING
BOLTS BOTH EARS
DRAIN PORT
OPTION 8 ISO 6149 (M22X1.5)
OPTION 9 3/4" BSPP
124.21
(4.89)
176.28
(6.94)
Front View
Top View
45.97
(1.81)
45.97
(1.81)
M10 THREAD
58.67
(2.31)
52.83
(2.08)
28.02 (1.10)
25.00 (.984)
27.66 (1.08) 24.99 (.983)
28.14 (1.10)
27.89 (1.09)
SHAFT OPTION B
(SAE B) 13 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE =
208.1 Nm (1,850 IN-LBS)
25.40
(1.00)
SHAFT OPTION K
( 25mm REF)
8mm x 7mm KEY
MAX TORQUE =
336.4 Nm (2,990 IN-LBS)
SHAFT OPTION D
(SAE BB) 15 TEETH
16/32 PITCH
30 INVOLUTE SPLINE
MAX. TORQUE =
336.4 Nm (2,990 IN-LBS)
SHAFT OPTION C
(SAE BB)
1" DIA. REF.
MAX TORQUE =
336.4 Nm (2,990 IN-LBS)
240.79
(9.48)
191.01
(7.52)
B
.250
SAE KEY
84.84
(3.34)
68.58
(2.70)
IN
OUT
25.07 (.986)
24.82 (.976)
87.38
(3.44)
84.84
(3.34)
ROT
176.28
(6.94)
ALTERNATE DRAIN PORT
Side View
(USE IF PUMP IS INVERTED)
OPTION 8 ISO 6149 (M22X1.5)
OPTION 9 3/4" BSPP
hpm102-1.p65, lw, jk
38
107.69
(4.24)
107.69
(4.24)
Rear View
Parker Hannifin Corporation
Hydraulic Pump Division
Marysville, Ohio USA
Catalog HY28-2661-CD/US
Dimensional Data
Thru-Shaft Pump Dimensions
NOTES:
G
F
E
NOTE: INPUT TORQUE RATINGS SHOWN ON PAGE A91
INCLUDE COMBINED TORQUE OF BOTH PUMPS.
Top View
A
C
232.16 (9.14)
REF.
ROT
D
B
Side View
Rear View
Dimensions Thru Shaft Options
VARIATION
6A1
257.56 (10.14)
50.83/50.85 (2.001/2.002)
41.28 (1.63)
5/16-18UNC-2B
38.10 (1.50)
69.09 (2.72)
6A2
263.91 (10.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
3/8-16UNC-2B
44.45 (1.75)
75.44 (2.97)
6A4
263.91 (10.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
3/8-16UNC-2B
31.75 (1.25)
N/A
6A5
263.91 (10.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
3/8-16UNC-2B
31.75 (1.25)
N/A
6B1
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
58.67 (2.31)
89.41 (3.52)
6B2
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
45.97 (1.81)
89.41 (3.52)
6B3
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
41.15 (1.62)
N/A
6B4
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
1/2-13UNC-2B
45.97 (1.81)
N/A
9A4
263.91 (10.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
M10 X 1.50
31.75 (1.25)
N/A
9A5
263.91 (10.39)
82.58/82.60 (3.251/3.252)
53.19 (2.09)
M10 X 1.50
31.75 (1.25)
N/A
9B3
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
M12 X 1.75
41.15 (1.62)
N/A
9B4
277.88 (10.94)
101.63/101.65 (4.001/4.002)
73.03 (2.88)
M12 X 1.75
45.97 (1.81)
N/A
hpm102-1.p65, lw, jk
39
Catalog HY28-2661-CD/US
Dimensional Data
NOTES:
1. Righthand (CW) rotation rear ported pump shown. Lefthand (CCW) pumps will
have inlet and outlet ports reversed.
2. When controlling pump compensator pressure with remote relief valve, size relief
valve to pass 1.89 LPM (.5 GPM).
3. Remote compensator shown on rear ported pump. Also available on side ported
or thru-shaft option pumps.
REMOTE CONTROL PORT
SAE-4 STRAIGHT THREAD
O-RING PORT
148.08
(5.83)
1/4"
BSPP
INTERNAL ORIFICE
INSTALLED ON
OPTIONS ME,
A & C
ADAPTOR FITTING
SUPPLIED WITH
9 OPTION
22.86
(.90)
144.78
(5.70)
REF
ADAPTOR FITTING
SUPPLIED WITH
PORT OPTION 8
PUMPS
ISO 6149-4
(M12X1.5)
DRAIN PORT
SAE-10 STRAIGHT
THREAD PORT
17.02
(.67)
Top View
149.35
(5.70)
REF
44.45
(1.75)
98.30 (3.87)
REF.
93.22 (3.67)
REF.
25.40
(1.00)
144.78
(5.70)
91.95
(3.62)
Front View
Side View
hpm102-1.p65, lw, jk
40
Catalog HY28-2661-CD/US
Dimensional Data
Power (Torque) Control Pump Dimensions
* Inch equivalents for millimeter dimensions are shown in (**).
NOTES:
1. Righthand (CW) ported pump shown.
2. Power (Torque) control shown with rear ported pump.
Also available on side ported and thru-shaft pumps.
3. Power torque control does not change with rotation.
144.78
(5.70)
120.14
(4.73)
REF
129.29
(5.09)
50.55
(1.99)
120.40
(4.74)
Front View
Side View
hpm102-1.p65, lw, jk
41
Catalog HY28-2661-CD/US
Installation Information
Fluid Recommendations
Premium quality hydraulic oil with a viscosity range
between 150-250 SSU (30-50 cst.) at 38C (100F).
Normal operating viscosity range between 80-1000
SSU (17-180 cst.). Maximum start-up viscosity is
4000 SSU (1000 cst.).
NOTE: Consult Parker when exceeding 71C (160F)
Inlet Fluid Temperatures. Oil should
have maximum anti-wear properties, rust and
oxidation treatment.
Filtration
Special Installations
Consult your Parker representative for any application
requiring the following:
Pressure above rated, drive speed above maximum,
indirect drive, fluid other than petroleum oil, oil
temperature above 71C (160F).
Start-Up
On initial start-up, the case should be filled with oil,
pressure adjustments should be reduced and the
circuit should be open to permit priming.
Inlet Pressure
Not to exceed 1.72 bar (25 PSI).
Inlet Conditions
Not to exceed .17 bar (5 In. Hg.) Vacuum at 1800
RPM on petroleum base fluids. See recommended
speed spectrum for specific inlet conditions.
hpm102-1.p65, lw, jk
42