Professional Documents
Culture Documents
And A Rocker at V.: Problem Set 2
And A Rocker at V.: Problem Set 2
1. Use the method of sections to find the force in member AK and EQ. Load P is equal
to 400 lb and the angle is 45. Note that the truss is supported by a pin support at A
and a rocker at V.
(Answer: EQ = 240 lb T, AK = 400 lb C)
3. D
Determine thee reactions at
a the fixed ssupport at A and roller aat F of the frame shown.
T radius off each pulley
The
y is 0.1 m.
(ANS: FY = 1.83 kN,, MA = 4.044 kNm Ccloockwise, AX = 0, AY = 3.17 kN)
5. T
The skid steerr loader has a mass M1, and in the position show
wn the centerr of mass is at
G1. If there iss a stone of mass M2 inn the bucket, with centerr of mass at G2 determinne
thhe reactions of each paair of wheells A and B on the grouund and thee force in thhe
hyydraulic cylinder CD an
nd at the pinn E. There is a similar linnkage on eaach side of thhe
looader.
Mg, M2 = 3000kg, a = 1.255m, b = 1.5m
m, c = 0.75m
m, d = 0.15m
m, e = 0.5m,
Given: M1 = 1.18M
= 30
k RB = 3.337 kN, CD = 12.94 kN, C Ex = 111.21 kN, Ey = 3.53)
(ANS: RA = 11.1 kN,