Professional Documents
Culture Documents
CATIA V5 Training Basic
CATIA V5 Training Basic
October 2006
V5 14
Issue: Draft A6
Contents
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Introduction Catia V5
Sketcher
Part Design
Generative Shape Design Introduction
Q-Checker
Assembly Design
Generative Drafting
DMU Introduction
Settings
V5 14
Issue: Draft A6
Page 2 of 312
Introduction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 Basics
Philosophy of CATIA V5
Product Structures
Solutions and Workbenches
Using the Mouse
Desktop User Interface
Toolbars
Starting the Part Design Workbench
Online Documentation
Select Objects and Geometry
Delete Objects and Geometry
General Toolbars
Options and Settings
Naming and Numbering
Layer
Filter
V5 14
Issue: Draft A6
Page 3 of 312
Introduction
Philosophy of CATIA V5
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 4 of 312
Introduction
Solutions and Workbenches
Solutions
Workbenches
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Catia V5 is divided into different solutions, which contain workbenches that are dedicated
to specific tasks
V5 14
Issue: Draft A6
Page 5 of 312
Introduction
Solutions and Workbenches
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
During the design process you can switch between the workbenches to change the available functions
for different tasks.
Changing the workbench
Start
With the workbench icon, which is normally
located in the right top corner, you have access to
your most favourite workbenches
Configure
Available workbenches
Favourites
Note: If you choose the same workbench, which is still open, a new part,
product or drawing will be started
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 6 of 312
Introduction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Selecting
Click MB1
Click MB3
Zooming
Rotating
Rotation Centre
Panning
Contextual menu
Click MB3
Click MB1
V5 14
Issue: Draft A6
Page 7 of 312
Introduction
Catia V5 Desktop User Interface
Pull Down Menus
Compass
Windows Manipulations
Help
Menu
Workbench icon
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Specification
Tree
Workbench
Toolbars /
Icons
General
Toolbars /
Icons
Dialogue
area
Document window
Standard Toolbar
V5 14
Issue: Draft A6
View Toolbar /
Manipulation Icons
|
Introduction
Toolbars (1/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Note: It is also possible to activate the commands by using the pull down menus.
V5 14
Issue: Draft A6
Page 9 of 312
Introduction
Toolbars (2/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 10 of 312
Introduction
Toolbars (3/3)
Resetting Toolbars
CATIA V5 memorizes the last toolbar
positions.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 11 of 312
Introduction
Starting the Part Design Workbench
Start CATIA V5 from VPM too build up the connection between this two programs
A new part can be creates of two different ways:
Use the Start > Mechanical Design > Part Design pull down menu for starting the Part
Design Workbench.
Use the File > New pull down menu to create a new CATPart.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 12 of 312
Introduction
Catia V5 Online Documentation (1/3)
F1
CATIA Documentation
Home Page
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Full-Text Search
Workbench
Indexes
Automation Documentation
Home Page
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 13 of 312
Introduction
Catia V5 Online Documentation (2/3)
Full-Text Search
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
1
3
V5 14
Issue: Draft A6
Page 14 of 312
Introduction
Catia V5 Online Documentation (3/3)
Workbench Indexes
2
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 15 of 312
Introduction
Selecting Elements
Selecting Elements can be done in the geometry area or in the specification tree.
Geometry area
In the geometry area you normally select a sub element of the geometry. For a Solid the sub elements are:
Vertex
Edge
Face
Vertex
Edge
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Face
During a modification this sub elements will be new calculated by CATIA and in some cases the
references will be lost!
Specification tree
In the specification tree you
can select only whole features.
When ever possible use the specification tree for select elements. Because, these kind of selection
is a more stable solution for modifications and updates!
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 16 of 312
Introduction
Selecting Objects and Geometry (1/4)
Select
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Selection
Trap
V5 14
Issue: Draft A6
Page 17 of 312
Introduction
Selecting Objects and Geometry (2/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Intersecting
Trap
V5 14
Issue: Draft A6
Polygonal
Trap
Page 18 of 312
Introduction
Selecting Objects and Geometry (3/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Paint Stroke
Trap
V5 14
Issue: Draft A6
Page 19 of 312
Introduction
Selecting Objects and Geometry (4/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Outside
Trap
Selection
Intersecting
Outside
Trap
Selection
V5 14
Issue: Draft A6
Page 20 of 312
Introduction
Preselection Navigator (1/1)
With the preselection navigator hidden or coincident elements, or elements located
elsewhere in the specification tree can be selected
The Preselection Navigator can by activated by:
Any keyboard arrow (left, right, up, down)
ALT + MB1
CTRL+F11
Time function
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Activate timer
V5 14
Issue: Draft A6
Page 21 of 312
Introduction
Preselection Navigator (2/2)
Additional Display window
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
List of stacked
elements
In the Dialog area the identification of the pre selected element is displayed:
V5 14
Issue: Draft A6
Page 22 of 312
Introduction
Delete Objects and Geometry
To delete objects or geometry:
select the element with the MB1 and use the Del (Entf) key on the
keyboard
or
move the cursor to the element and click the MB3 to open the
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 23 of 312
Introduction
General Toolbars
Standard Toolbar
Open
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
New
Quick Print
Save
Undo
Selection
Copy
Cut
Paste
Whats this?
Redo
Selection
V5 14
Issue: Draft A6
Page 24 of 312
Introduction
General Toolbars
View Toolbar
Fit All In
Fly Mode
Rotate
Pan
Zoom Out
Zoom In
View
Mode
Create
multi view
Normal
View
Quick
View
Swap Visible
Space
Hide/
Show
Isometric View
Shading (SHR)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Front View
Shading with Edges
Back View
Bottom View
V5 14
Issue: Draft A6
Page 25 of 312
Introduction
Multi view
Divide the screen in several views of the 3D model.
The views can be customized in the Menu
View
Navigation Mode
Multi-View Customization
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Choose a Layout
Viewpoint definition
for each view
Define Options
for each view
V5 14
Issue: Draft A6
Page 26 of 312
Introduction
Named Views / Compass
Additional Viewpoints can be saved.
1.
2.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Click on Z axis
again to reverse
view direction.
Page 27 of 312
Introduction
Customize View Parameters
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 28 of 312
Introduction
General Toolbars
Graphic Properties
Fill colour
Line weight
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Transparency
1.
2.
3.
Point type
Line type
Layer
Rendering
style
Wizard
Painter
(copy graphic
Properties)
V5 14
Issue: Draft A6
Page 29 of 312
Introduction
Colours (1/3)
With colours a hole part or sub elements
of a part can be marked.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
CATPart
Face (Solid)
Feature
Body
Wireframe and Surface
Inside a CATPart the priority of the element colour is from bottom up which can be analyzed with the
graphic wizard (CATIA V5 R14):
V5 14
Issue: Draft A6
Page 30 of 312
Introduction
Colours (2/3)
CATProduct
Product / Sub product
Instance
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Inside a CATProcuct the priority of the element colour is top down up which can be analyzed with the
graphic wizard (CATIA V5 R14):
V5 14
Issue: Draft A6
Page 31 of 312
Introduction
Colours (3/3)
See AM2232 Module 1 Layers and Colours within CATIA V5
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 32 of 312
Introduction
Layer (1/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 33 of 312
Introduction
Layer (2/2)
Select View > Toolbars > Graphic Properties
in the pull down menu
Layer box
Catia V5 provides
several layers. All
layers will be visible
in the layer box
"None" in the Layer box indicates that there is no current layer for the
selected object.
If an object is selected, the name of the layer on which the object is
located is displayed in the box. To find out which layer an object is
assigned to, select the object and look at the Layer box.
When no objects are selected, the layer is displayed in the Layer box
as None
Any new objects will be created on the current layer
To move from the current layer, make sure that no object is selected,
then enter the new layer number in the box.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Note:
It is not allowed to modify or
add a layer name
V5 14
Issue: Draft A6
Page 34 of 312
Introduction
Filter
After assigning objects to layers, create some filters which allow you to display only the
objects which are located in specific layers.
Select Tools > Visualization Filters...
To create a new filter
click on New
Select a filter
and click ok
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
New
V5 14
Issue: Draft A6
Page 35 of 312
Introduction
Options and Settings
To modify the CATIA V5 options use the pull down menu Tools > Options.
There are several general options and special options for each Workbench.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
For example Tools > Options > General > Display > Tree to show the display of the
specification tree options
If an option is locked
(a red symbol) the user
cant modify it.
V5 14
Issue: Draft A6
Page 36 of 312
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sketcher
Basics
Sketcher Rules
Accessing the Sketcher
Toolbars and Icons Overview
Toolbar Profile Creation
Toolbar Operations
Toolbar Constraints
Toolbar Sketch Tools
Constraints
Formula
Parameter
Sketch Analysis
Hints and Tips
Constraints
Dimensioning
Sketch positioning
Multi domain
Projection and Intersection
Create Circle
V5 14
Issue: Draft A6
Page 37 of 312
Sketcher
Basics
A Sketch is a geometric elements which contains one or several
contour created in the Sketcher workbench.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 38 of 312
Sketcher
Sketcher Rules
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 39 of 312
Sketcher
Sketcher Rules
There are some restrictions for sketches to create solid features:
Allowed Sketch Contours
Several contours
Several contours
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Open contour
V5 14
Page 40 of 312
Sketcher
Accessing the Sketcher (1/4)
There are different possibilities to start the sketcher:
Inside e.g. the Part Design or Wireframe and Surface Design Workbench click the
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sketcher Icons
Sketcher
V5 14
Issue: Draft A6
Page 41 of 312
Sketcher
Accessing the Sketcher (2/4)
Sketcher
To define the Sketch Support, select a plane or a planar face or surface (either in the
geometry area or in the specification tree).
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sketcher
The normal of the working support is the same as the principal normal of the selected plane.
Eg. If you choose a plane parallel to the xy plane, the principal normal is z. The origin of the
Absolute Axis system of the sketch is automatically positioned on the origin of the CATPart.
Note: A sketch used to create a Part Design element (e.g. a pad) should be created directly in
the body that will contain this element and not in an open body. Otherwise it will be duplicated
and its management will be trickier. (See AM2259)
V5 14
Issue: Draft A6
Page 42 of 312
Sketcher
Accessing the Sketcher (3/4)
Sketch with Absolute Axis definition
This command enables to create a logical sketch origin. This will give better control and
easier constraining of the sketch.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Origin
(e.g. intersection
between the axis
and the face of
the shaft)
Sketch Support
(e.g. face of the
shaft)
Sketch
with
Absolute
Axis
definition
V5 14
Issue: Draft A6
Orientation
(e.g. horizontal direction
(H) parallel to an edge
of the pocket)
Date: 29. October 06
Page 43 of 312
Sketcher
Accessing the Sketcher (4/4)
Sketch with Absolute Axis definition
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Origin:
Part origin
Projection point
Intersection 2 lines
Curve intersection
Middle point
Barycentre
V5 14
Issue: Draft A6
Page 44 of 312
Sketcher
Toolbars and Icons Overview (1/9)
Toolbar
Profile Creation
(1/2)
Rectangle
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Profile
Spline
Circle
Line
Ellipse
Rectangle
Circle
Oriented Rectangle
Parallelogram
Elongated Hole
Tri-Tangent Circle
Point
Axis
Spline
Connect
Keyhole Profile
Arc
Hexagon
Centered Rectangle
Centered Parallelogram
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 45 of 312
Sketcher
Toolbars and Icons Overview (2/9)
Toolbar
Profile Creation
(2/2)
Rectangle
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Profile
Spline
Circle
Line
Ellipse
Point
Axis
Ellipse
Line
Point
Parabola by Focus
Infinite Line
Hyperbola by Focus
Bi-Tangent Line
Equidistant Points
Creates a Conic
Bisecting Line
Intersection Point
Projection Point
Line Normal to Curve
V5 14
Issue: Draft A6
Page 46 of 312
Sketcher
Toolbars and Icons Overview (3/9)
Toolbar
Operation
Chamfer
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Corner
Symmetry
Trim
Trim
Symmetry
Break
Translate
Quick Trim
Rotate
Close
Scale
Complement
Offset
V5 14
Issue: Draft A6
Project 3D-Elements
Project 3D Elements
Intersect 3D Elements
Project 3D Silhouette Edges
Page 47 of 312
Sketcher
Toolbars and Icons Overview (4/9)
Toolbar
Constraints
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Constraint
Constraints
Defined in
Dialog Box
Auto Constraint
Contact Constraint
V5 14
Issue: Draft A6
Edit Multi
Constraint
Fix together
Constraint
Animate
Constraint
Page 48 of 312
Sketcher
Toolbars and Icons Overview (5/9)
Toolbar
Sketch tools
(Standard)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Construction/Standard Element
Geometrical Constraints
Dimensional Constraints
V5 14
Issue: Draft A6
Page 49 of 312
Sketcher
Toolbars and Icons Overview (6/9)
Toolbar
Sketch tools
(Extended)
Standard tools
Options
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Function:
Option:
Function:
Option:
Select a Curve before
Symmetrical Extension
Line normal
to a curve
Line
Infinite Line
Profile
Tangent Arc
Line (Standard)
Horizontal Line
V5 14
Issue: Draft A6
Page 50 of 312
Sketcher
Toolbars and Icons Overview (7/9)
Toolbar
Sketch tools (Extended)
Funktion:
Option:
Funktion:
Nearest Endpoint
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Connect
Conic
Connect with a Spline
Two Points
Continuity in Point
Four Points
Continuity in Tangent
Five Points
Continuity in Curvature
Option:
V5 14
Issue: Draft A6
Page 51 of 312
Sketcher
Toolbars and Icons Overview (8/9)
Toolbar
Sketch tools (Extended)
Function:
Function:
Option:
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Corner
Option:
No Trim
No Trim
V5 14
Issue: Draft A6
Page 52 of 312
Sketcher
Toolbars and Icons Overview (9/9)
Toolbar
Sketch tools (Extended)
Funktion:
Option:
Funktion:
Quick Trim
Trim
Option:
Both Side
Offset
Offset
Point Propagation
Along a Direction
Projection
Point
Orthogonal Projection
Tangent Propagation
No Propagation
V5 14
Issue: Draft A6
Page 53 of 312
Sketcher
SmartPick (1/3)
Using SmartPick, you will easily specify a location:
whenever possible.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
2. Contextual menu:
V5 14
Issue: Draft A6
Page 54 of 312
Sketcher
SmartPick (2/3)
Symbols for the SmartPick cursor
horizontal
Vertical
Point, Curve Extremity Point, Midpoint of a Line
All over a Curve, Intersection Point
Tangent
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Parallel
Perpendicular
Selection not possible
Note:
To create a geometrical constraint from the SmartPick detection the Geometrical Constraint icon must be
activated (orange).
To create a dimensional constraint from the parameter values in the Sketch Tools Toolbar the
Dimensional Constraint icon must be activated (orange).
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 55 of 312
Sketcher
SmartPick (3/3)
Control the activity of the constraint detection
Shift Key: Dynamic deactivation of the auto-detection (SmartPick)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Press and
Keep Hold
of the Shift
Key
Ctrl Key: Lock the current detected constraint to reduce the degree of freedom
Press and
Keep Hold
of the Ctrl
Key
V5 14
Issue: Draft A6
Page 56 of 312
Sketcher
Toolbar Profile Creation (1/6)
Create an open or closed shape including arcs and lines. You can
create either by clicking or using the Sketch tools toolbar. When you
create a profile by using the Sketch tools toolbar, constraints are
similarly assigned to this profile.
Profile
Create a rectangle by clicking or using the Sketch tools toolbar. The
orientation of the lines will be horizontal or vertical.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Rectangle
Create a rectangle in the direction of your choice by clicking or using
the Sketch tools toolbar. Define the direction of the first side with a
line, and then the height of the rectangle with a point.
Oriented Rectangle
Create a parallelogram by clicking or using the Sketch tools toolbar.
Parallelogram
Create an elongated hole by clicking or using the Sketch tools toolbar.
Define the first and the second point of the symmetry axis, and then
the elongated hole radius.
Elongated Hole
V5 14
Issue: Draft A6
Page 57 of 312
Sketcher
Toolbar Profile Creation (2/6)
Create an cylindrical elongated hole by clicking or using the Sketch
tools toolbar. Define the circle centre, the arc extremities and the
radius of the cylindrical elongated hole.
Cylindrical Elongated Hole
Create a keyhole profile by clicking or using the Sketch tools toolbar.
Define the first and the second point of the symmetry axis, the first
radius and then the second radius.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Keyhole Profile
Create an hexagon inside a construction circle by clicking or using the
Sketch tools toolbar. Define the hexagon centre and then either a point
on this hexagon or the hexagon dimension and angle
Hexagon
Create a circle by clicking or using the Sketch tools toolbar. Define the
circle centre and the radius.
Circle
Create a circle by clicking or using the Sketch tools toolbar. Define
the circle start point, second point and end point one after the other.
Three point Circle
V5 14
Issue: Draft A6
Page 58 of 312
Sketcher
Toolbar Profile Creation (3/6)
Create a circle by using the Circle Definition dialog box. Define the
centre point coordinates and the Radius. If you select a point before
clicking the icon, this point will be used as reference point. Else the
reference point is the origin of the sketcher axis system.
Circle using Coordinates
Create a circle by clicking. Define three elements (point, line, circle,
spline) one after the other to create a circle made of three tangent
constraints (line, circle, spline) or coincidence constraints (point).
Tri-Tangent Circle
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 59 of 312
Sketcher
Toolbar Profile Creation (4/6)
Spline
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Connect
Ellipse
Create a parabola by clicking or using the Sketch tools toolbar. Define
the focus, apex and then the parabola two extremity points.
Parabola by Focus
Create a hyperbola by clicking or using the Sketch tools toolbar.
Define the focus, centre and apex, and then the hyperbola two
extremity points.
Hyperbola by Focus
V5 14
Issue: Draft A6
Page 60 of 312
Sketcher
Toolbar Profile Creation (5/6)
Create a conic type element (circle, ellipse, parabola, hyperbola) by
clicking or using the Sketch tools toolbar. Define the desired points
and if needed, use tangents or enter the excentricity
Creates a conic
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Line
Create a line by clicking or using the Sketch tools toolbar. Define the
startpoint and the endpoint of the line. Use the contextual menu to
copy the length of an existing line or to take an existing line as angle
reference.
Create an infinite line either horizontal, vertical or through two points
by clicking and using the Sketch tools toolbar. Select an option in the
toolbar and then indicate one or two points.
Infinite Line
Create a line by clicking. Define two elements (point, line, circle, spline)
one after the other to create a line made of two tangent constraints
(line, circle, spline) or coincidence constraints (point).
Bi-Tangent Line
Create an infinite bisecting line by clicking or using the Sketch tools
toolbar. Select two existing lines. If both selected lines are parallel to
each others, a new line will be created between these lines.
Bisecting Line
V5 14
Issue: Draft A6
Page 61 of 312
Sketcher
Toolbar Profile Creation (6/6)
Point
Create a point by clicking or using the Sketch tools toolbar. Define the
horizontal and vertical coordinates of the point. To get the centre of gravity
between existing points (isobarycenter), select this points before clicking
the points icon.
NOTE: All the points must be converted into construction elements, before
using a sketch for creating a solid feature (e.g. a pad).
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Create a point by using the Point Definition dialog box. Define the point
coordinates. If you select a point before clicking the icon, this point will be
used as reference point. Else the reference point is the origin of the
sketcher axis system.
Point Using Coordinates
Create a point by using the Equidistant Point Definition dialog box. Select
a line or a curve-type element. Define the number and spacing of the
points.
Equidistant Points
Create one or more points by intersecting curve type elements. Multi-select
the elements to be used for intersecting, then click the Intersection Point
icon and then select the element which intersect with the first selected.
Intersection Point
Projection
Point
V5 14
Issue: Draft A6
Page 62 of 312
Sketcher
Create a profile (1/2)
1. Click with MB1 to define the start point of the
profile
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 63 of 312
Sketcher
Create a profile (2/2)
5. To create an tangent arc, hold down the
MB1 and move the mouse away from the
last endpoint.
The parameters for the segments can also
defined in the Sketch tool bar.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 64 of 312
Sketcher
Toolbar Operation (1/3)
Corner
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Chamfer
Trim
Create a rounded corner between two lines or curve type elements using
trimming operation. The arc will be tangent to the two lines or curves. To
modify the trim option (Trim All Elements, Trim First Element, No Trim)
use the Sketch tools toolbar.
You can create several corners by multi-selecting
Create a chamfer between two lines or curve type elements using trimming
operation. To modify the trim option (Trim All Elements, Trim First
Element, No Trim) or the chamfer definitions (Angle/Hypotenuse,
Length1/Length2, Length1/Angle) use the Sketch tools toolbar.
You can create several chamfers by multi-selecting
Trim lines or curve type elements. If an element does not intersect with
another element an extrapolation is done. To modify the trim option
(Trim All Elements, Trim First Element) use the Sketch tools toolbar.
You can multi-select the elements to be trimmed
Break a line or a curve type element. First select the line to be broken
and then the element which is used for breaking.
By using the break icon, you can also isolate points.
Break
Quickly breaking, trimming and/or deleting (rubber) elements
intersected by other Sketcher elements. To modify the trim option
(Break And Rubber In, Break And Rubber Out, Break And Keep) use the
Quick Trim Sketch tools toolbar.
V5 14
Issue: Draft A6
Page 65 of 312
Sketcher
Toolbar Operation (2/3)
Close circles or ellipses.
Set splines which was relimited by using the trim icon to its original
limitation again.
Close
Complement an arc (circle or ellipse)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Complement
Create the symmetry of existing Sketcher elements by using a line, a
construction line or an axis. The geometry will be duplicated. If the
Dimensional Constraint option in the Sketch tools toolbar is activated a
Symmetry symmetry constraint is created.
Create a translation by using the Translation Definition dialog box. Enter
the number of copies, (multi-)select the element to be translated, select the
start and endpoint of the translation vector and define the value for the
translation length. The duplicate mode is activated by default. Internal and
Translate external constraints (geometrical and dimensional) can be preserved.
Rotate
Create a rotation by using the Rotation Definition dialog box. Enter the
number of copies, (multi-)select the element to be rotated, select the
rotation centre point, click a point to define the reference line, define the
value for the rotation angle. The duplicate mode is activated by default.
Internal constraints can be preserved. External geometrical constraints
are deleted. External dimensional constraints are modified.
V5 14
Issue: Draft A6
Page 66 of 312
Sketcher
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Scale
Scale a profile. The distance values will be resized, the angle values will
not be modified. (Multi-)select the element to be scaled, define the centre
point on the geometry, enter the scale value. The duplicate mode is
activated by default. Internal constraints can be preserved. External
geometrical constraints are killed. External dimensional constraints are
modified.
Offset
Project 3D elements (e.g. edges or faces) onto the sketch plane. If you
select a face, the edges are projected. These projections (marks) are
yellow and associative to the 3D part. If needed, use the contextual menu
to isolate the marks.
Project 3D Elements
Intersect 3D elements (e.g. edges, faces, pads) onto the sketch plane. If
you select a face or pad, the edges are projected. These projections
(marks) are yellow and associative to the 3D part. If needed, use the
contextual menu to isolate the marks.
Intersect 3D Elements
Project silhouette edges from a canonical surface onto the sketch plane.
The axis of the canonical surface must be parallel to the sketch plane.
These projections (marks) are yellow and associative to the 3D part. If
needed, use the contextual menu to isolate the marks.
Project 3D Silhouette Edges
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 67 of 312
Sketcher
Toolbar Constraints
Define one or several constraints simultaneously using the Constraint
Definition dialog box. Select or multi-select the elements to be
constrained and then the Constraints Defined in Dialog Box Icon.
Constraints Defined in Dialog Box
Set dimensional or geometrical constraints between one or several elements.
The constraints are in priority dimensional. Use the contextual menu to get
other types of constraints and to position this constraint as desired.
Constraint
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 68 of 312
Sketcher
Toolbar Constraints
Join geometry to a rigid set. If one element is moved, the hole group
move together.
Fix together
All the dimensional constraints of a sketch can be edit in a dialog box at the
same time
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Edit Multi-Constraint
V5 14
Issue: Draft A6
Page 69 of 312
Sketcher
Toolbar Sketch Tools
If activated, this option makes your sketch begin or end on the points of the grid. As
you are sketching the points are snapped to the intersection points of the grid.
Snap to Point
Create standard elements when the icon is inactivated and construction elements
when the icon is activated. Construction elements are not taken into account
when creating features, and they do not appear outside the Sketcher
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Construction/Standard Element
Dimensional Constraints
V5 14
Issue: Draft A6
Page 70 of 312
Sketcher
Tools
If the Icon is activated Projections, Intersections and Silhouettes from 3D are not
associative.
Create Datum
With the output feature construction elements and single elements can be used
outside the sketch. Output features have a special update behaviour.
Output feature
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Several Profiles inside a complex sketch can be defined. In the specification tree each profile can
be selected separate
Output Profil
Analyse if the sketch is fully, under or over constraint
Sketch Analysis
V5 14
Issue: Draft A6
Page 71 of 312
Sketcher
Visualisation
Cut the 3D Solid geometry temporary on the sketch plane to see the inside
the volume.
Cut Part by Sketch plane
The Usual mode is the default option. When activated, the 3D geometry
is visible in the Sketcher.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Usual
In the Low Light mode all geometrical elements and features appear as graycolored, except for the current sketch. You cannot select the 3D geometry,
you can just handle Sketcher elements.
Low Light
V5 14
Issue: Draft A6
Page 72 of 312
Sketcher
Visualisation
Show / Hide the diagnostic colours of the sketch
Diagnostic
Show / Hide all dimensional Constraints of the sketch
Dimensional constraint
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Geometrical Constraint
V5 14
Issue: Draft A6
Page 73 of 312
Sketcher
Constraints (1/4)
Constraints are used to control the size and the position of an element
and its relationship to other elements.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Geometric Constraints
control the
relationship between the elements (e.g. coincidence, parallel) or
the orientation of an element (e.g. horizontal, vertical).
Dimensional Constraints
control the
size of an element (e.g. length, radius) or
the distance and angle between elements.
V5 14
Issue: Draft A6
Page 74 of 312
Sketcher
Constraints (2/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Fix
Concentricity
Coincidence
Symmetry
Horizontal
Midpoint
Vertical
Equidistant point
Tangency
Perpendicular
Parallelism
V5 14
Issue: Draft A6
Page 75 of 312
Sketcher
Constraints (3/4)
Visualization of Dimensional Constraints
Length / Distance
Radius
Diameter
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Angle
Semiminor axis
Note:
You can obtain a radius
constraint by editing a
diameter constraint. You
just need to double-click
the diameter constraint and
choose the radius option in
the displayed dialog box.
Semimajor axis
V5 14
Issue: Draft A6
Page 76 of 312
Sketcher
Constraints (4/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Constraint Colors
Select another element or
the background
Orange
Selected
Green
Fixed
Green
Iso-constrained
White
Under-constrained
Purple
Over-constrained
Red
Inconsistent
Brown
Geometry
not changed
Protected
Yellow
V5 14
Issue: Draft A6
Page 77 of 312
Sketcher
Formula (1/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Adding a Formula
Double-clicking on the
desired constraints to
modify the related data
in the displayed
Constraint Definition
dialog box
move the cursor to the value and
click the MB3 to open the
contextual menu
V5 14
Issue: Draft A6
Page 78 of 312
Sketcher
Formula (2/3)
Adding a Formula
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Define the
formula
V5 14
Issue: Draft A6
Page 79 of 312
Sketcher
Formula (3/3)
Show the name of a dimension
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
For a better overview, it is possible to display the name of a dimension in the sketch.
Note:
Use formulas only for real master elements and not for creation comfort reasons (See AM2259)
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 80 of 312
Sketcher
Parameter (1/4)
Creating a user Parameter
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Click New
Parameter of type
2
1
Select e.g. the Length item with Single Value in the
New Parameter of type list
V5 14
Issue: Draft A6
Page 81 of 312
Sketcher
Parameter (2/4)
Displaying a user Parameter
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Note:
To display the parameter use
Tools > Options > Infrastructure > Part Infrastructure > Display > Display in Specification Tree
To display the parameter with their provided values, use
Tools > Options > General > Parameters and Measure > Knowledge > Parameter Tree View
V5 14
Issue: Draft A6
Page 82 of 312
Sketcher
Parameter (3/4)
Using a user Parameter
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Double-click the
parameter in the field
Members of Renamed
parameters to insert
the parameter in the
formula.
V5 14
Issue: Draft A6
Page 83 of 312
Sketcher
Parameter (4/4)
Lock Parameter
With this functions parameters can be looked and unlooked. The
value of a looked parameter can not be changed.
Select the parameter and the icon for lock and unlock.
Lock
Unlock
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 84 of 312
Sketcher
Equivalent Parameters (1/4)
Equivalent Parameters
With this function several (Length and Angle) Parameters can be set to
the same value. When one of the equivalent parameters will be changed
all the other will became the same value.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 85 of 312
Sketcher
Equivalent Parameters (2/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 86 of 312
Sketcher
Equivalent Parameters (3/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
In the specification tree the equivalent dimensions is positioned under the relations
V5 14
Issue: Draft A6
Page 87 of 312
Sketcher
Equivalent Parameters (4/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Equivalent Dimensions can be edit by double click the specification tree or one of the values
V5 14
Issue: Draft A6
Page 88 of 312
Sketcher
Sketch Analysis (1/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Inside the Sketcher Workbench use the Tools > Sketch Analysis pull down menu to start
the Sketch Analysis
V5 14
Issue: Draft A6
Page 89 of 312
Sketcher
Sketch Analysis (2/3)
A general status of all
geometrical elements will
be shown
After the selection of an
element in the Geometry
list (e.g. Point.22) or in the
Projections/Intersections
list, it is possible to use
some corrective actions if
the geometry is not
correct.
Projections / Intersections
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Geometry
turn this element into a
construction element
isolate geometry
activate/deactivate a constraint
erase geometry
Hide constraints
replace 3D geometry
Hide constraints
Hide Construction Geometries
V5 14
Issue: Draft A6
Page 90 of 312
Sketcher
Sketch Analysis (3/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 91 of 312
Sketcher
Hints and Tips Constraints (1/3)
Starting the Sketch in the origin of the sketch absolute axis
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Hint:
By using the Break icon, you can
isolate points: If you select a point
with a coincident constraint, this point
will become independent of the
coincidence constraint.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Select the
Break icon
and then
the point
Page 92 of 312
Sketcher
Hints and Tips Constraints (2/3)
Control the activity of the constraint detection (3/3)
SmartPick switch button: Permanent deactivation of the auto-detection (SmartPick).
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
As you create more and more elements, SmartPick detects multiple directions and
positions, and more and more relationships with existing elements. This may lead to
confusion due to the rapid highlighting of several different detection possibilities as you
point the cursor at different elements in rapid succession. Consequently, you can
decide to filter out undesired detections.
Use the Tools > Options > Mechanical Design > Sketcher > Sketcher > Constraints
menu and select the SmartPick Icon
to modify the SmartPick options.
V5 14
Issue: Draft A6
Page 93 of 312
Sketcher
Hints and Tips Constraints (3/3)
Modify the Constraint Type
1.
2.
3.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Coincidence
constraint type.
Distance
constraint type.
3
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Page 94 of 312
Sketcher
Hints and Tips Dimensioning (1/2)
Manage the orientation and type of the current dimension
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 95 of 312
Sketcher
Hints and Tips Dimensioning (2/2)
Modify geometry
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Press and
Keep Hold
of the Shift
Key while
dragging the
geometry
V5 14
Issue: Draft A6
Page 96 of 312
Sketcher
Hints and Tips - Multi domain
Sketch Multi domain
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Page 97 of 312
Sketcher
Hints and Tips - Projection and Intersection (1/2)
Projection and Intersection of 3D Elements
Note that the order of the selection (Action-Object or Object-Action) can change the result
1. Action-Object
Select the Surface
of a cylinder
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Select the
Intersection
Icon
The result is
a point
2. Object-Action
Select the Surface
of a cylinder
Select the
Intersection
Icon
V5 14
Issue: Draft A6
The result is
a circle
Page 98 of 312
Sketcher
Hints and Tips - Projection and Intersection (2/2)
Projection and Intersection of 3D Elements
Projection and intersection of 3D elements directly to sketches
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Marks created via projection, intersection or silhouette edges are associative to their
parent 3D elements
To break this associativity use the MB3 > Sketch.object > Isolate. The marks are
isolated and each trace is replaced by an equivalent geometrical element
V5 14
Issue: Draft A6
Page 99 of 312
Sketcher
Hints and Tips - Create Circle
Switch between radius and diameter
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Sketcher
Hints and Tips - Dimension of an Ellipse
For a iso constraint ellipse you need the following five constraints:
Semiminor axis
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Angle
Semimajor axis
V5 14
Issue: Draft A6
Part Design
Basics
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Pattern
Searching Elements
Change the Sketch Support
To stack Actions
Hide Elements
Behaviour of Show/Hide
Hole positioning
Variable Edge Fillet
Using multi domain Sketch
Basic Methods
General Modelling Rules
Part Design
Basics The Specification Tree (1/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Note:
You may require more time to produce a good
concept, you will gain this by spending less
time during the design.
Starting without a concept can lead in extreme
cases in having to start again.
Part Design
Basics The Specification Tree (2/3)
Structure of the Specification Tree
Note:
The elements will automatically
get names which are built out of
strings defined by the element
type and a running number
(e.g. Pad.1).
By using only this automatic
naming you can easily loose the
overview and orientation in the
tree. It is difficult to remember
what e.g. Assemble.278
connects with Body.9.
A good practice will be to
rename the features to help you
to navigate through the tree.
You can rename by selecting
the feature and using MB3 on
that Feature> Properties >
Feature Properties
Short cut = ALT-ENTER.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics The Specification Tree (3/3)
Structure of the Specification Tree
You can reorder the positions of the features in the tree afterwards. But remember,
this can have an influence on the geometry of the part. Sometimes the result will
totally change or some geometry won t be calculated. On the other hand, the
reordering of the tree can sometimes help to get the desired result.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (1/7)
PartBody
The PartBody has a special role in the specification tree. Its use and influence on the construction has
to be known.
The finished designed part has to be completed within the PartBody (at AIRBUS this is mandatory!).
Only by this way, a clean connection to down stream processes (e.g. calculations or automatic bill of
material) is guaranteed.
Important:
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (2/7)
PartBody
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
It is possible to move all or part of the content of the PartBody into a new body
MB3
The body becomes
the PartBody
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (3/7)
Body
Additional bodies can be inserted. They will help to generate a
better structure of the tree in cases of complex parts.
These bodies can be connected by Boolean operations. E.g. using
separate bodies for the inner areas, outer areas, the raw casting
and/or machining helps to divide the different operation steps and
make a clearer structure.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Use the Insert > Body pull down menu for creating an additional Body.
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (4/7)
Geometrical Set
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (5/7)
Ordered Geometrical Set
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Properties of an OSG:
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (6/7)
Geometrical Set
To keep the overview in the tree, it is good to add one or several
Geometrical Sets to the tree and name them with corresponding names.
By that you can group the wireframe objects.
Change into the Wireframe and Surface Design
Workbench > Insert > Geometrical Set
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics PartBody, Body and Geometrical Sets (7/7)
Geometrical Set
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basics Features (1/3)
Feature-based design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Features are entities that should be combined to make up a part. They include the
generating of geometry, an operation or a combination of both. Some operations
consist in adding material (e.g. rib), others in removing material (e.g. hole and
pocket)
There are several groups of Features:
Sketch-based Features
Dress-Up Features
Surface Based Features
Transformation Features
V5 14
Issue: Draft A6
Part Design
Basics Features (2/3)
Handling of Features
Features can be duplicated, copied, translated, deleted, deactivated, or modified in the
structure position.
With the context menu of the right mouse button you can delete, deactivate, or
translate the features.
You can also use the buffer for the cut, copy, and translate functions to modify the
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Note:
It is not allowed to use the Drag&Drop functionality at Airbus.
V5 14
Issue: Draft A6
Part Design
Basics Features (3/3)
Parameters and References of Features
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The parameter values and the references of a Feature can be modified at any time.
Double click on the Feature in the structure tree and the corresponding panel will
appear.
The same is true for the sketches. A double click on it to open it, then constraints,
dimensions or geometry can be modified, added, or deleted.
V5 14
Issue: Draft A6
Part Design
Toolbars and Icons Overview (1/4)
Toolbar
Sketch - Based Features
Pocket
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Pad
Groove
Shaft
Rib
Hole
Stiffener
Slot
Removed Loft
Loft
Pad
Stiffener
Solid Combine
Multi Pad
Multi Pocket
V5 14
Issue: Draft A6
Part Design
Toolbars and Icons Overview (2/4)
Toolbar
Dress Up Features
Champfer
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Fillet
Shell
Thread/Tap
Thickness
Draft
Remove Face
Edge Fillet
Draft Angle
Remove Face
Variable Fillet
Replace Face
Variable Draft
Tritangent Fillet
V5 14
Issue: Draft A6
Part Design
Toolbars and Icons Overview (3/4)
Toolbar
Transformation Feature
Toolbar
Surface Based Feature
Mirror
Scaling
Surface
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Translation
Pattern
Split
Translation
Rectanggular Pattern
Rotation
Circular Pattern
Symmetry
User Pattern
Thick Surface
Close Surface
Sew Surface
V5 14
Issue: Draft A6
Part Design
Toolbars and Icons Overview (4/4)
Toolbar
Boolean Operations
Add
Remove Lump
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Assemble
Union Trim
Add
Remove
Intersect
V5 14
Issue: Draft A6
Part Design
Sketch-Based Features (1/2)
Create a pad means extrude a profile in one or two directions. You
can choose the limits of creation as well as the direction of extrusion.
Pad
Create a pocket consists in extruding a profile and removing the material
resulting from the extrusion. You can choose the limits of creation as well
as the direction of the extrusion.
Pocket
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Grooves are revolved features that remove material from existing features
Groove
V5 14
Issue: Draft A6
Part Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Rib
Create a rib by using a centre curve, a planar profile and possibly reference
element or a pulling direction. Ribs can also be created from sketches
including several profiles. These profiles must be closed and must not
intersect.
Slot
To define a slot, you need a centre curve, a planar profile, a reference element
and possibly a pulling direction. Slots can also be created from sketches
including several profiles. These profiles must be closed and must not
intersect.
To define a stiffener you need an open profile. Make sure that the material can
limit the extrusion of this profile.
Stiffener
Define a Solid with an intersection of two sketches in different planes
Solid Combine
V5 14
Issue: Draft A6
Part Design
Pad /Pocket
A pad /pocket is a prismatic volume based on a sketch, planar curve or surface / face
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Closed sketch or
closed planar curve
Face or Surface
Dimension
Up to next
Up to last
Plane
Surface
Note: The limits for Up to next / Up to last must be in the same Body!
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Pad /Pocket
The extrusion direction of a pad / pocket normally is normal to the sketch plane. You
can define the direction by select a linear curve.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Reference for
direction
With the Thick option a wall thickness on the sketch contour can be created.
Closed contour
Open contour
V5 14
Issue: Draft A6
Part Design
Pad /Pocket
Special cases
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
If another solid feature in the body exists, an open contour can be trimmed on this
geometry
Pad
Open contour
Pocket
Open contour
Open contour
Options: Thick, Merge Ends
Note: The limits for Merge Ends must be found on both ends of the contour in the current body!
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Shaft / Groove
A shaft / groove is a rotational volume based on a sketch, planar curve or surface / face
The rotation axis can be:
A sketch axis (preferred solution)
A cylindrical face
A linear curve (line)
The contour does not intersect the rotation axis:
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Closed Contour
Open Contour
V5 14
Issue: Draft A6
Part Design
Shaft / Groove
Rotation Angle
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Rotation Axis
Recognized by CATIA,
if the sketch contains
an axis
Shaft
V5 14
Issue: Draft A6
Part Design
Hole (1/5)
The sketch of a hole must not defined in advance, the sketch will be
created automatically an contain one point in standard mode.
Select a face (or plane)
Extension
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Hole
dimensions
Direction of
the hole axis
Bottom shape
V5 14
Issue: Draft A6
Part Design
Hole (2/5)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Hole Types
Simple
Tapered
Counterbored
Countersunk
Counterdrilled
For the countersunk hole type are three parameter combinations available:
Depth & Angle
Depth & Diameter
Angle & Diameter
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Hole (3/5)
Thread
Activate Thread
Select Thread standard
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Thread Analysis
Numeric Value
Symbolic
geometry
Define Filters
V5 14
Issue: Draft A6
Part Design
Hole positioning (4/5)
It is possible to constraint a hole during the creation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Available selections:
Circular edge + support = concentricity
V5 14
Issue: Draft A6
Part Design
Hole positioning (5/5)
To control the hole direction on a non planar face you can use an line
for steering the hole direction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The center point is the intersection between the face and the line
V5 14
Issue: Draft A6
Part Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Rib / Slot
Note: The limits for Merge ribs ends must be found on both ends of the rib/slot in the current body!
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Rib / Slot
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Profile Control
Keep Angle
Pulling Direction
Reference Surface
V5 14
Issue: Draft A6
Part Design
Stiffener
Mode: From Side
Sketch the Side view of the Stiffener
An open sketch is limited by intersect or extrapolation on the solid
geometry of the current body. A limitation in all directions is necessary.
NF
NF
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Stiffener
Mode: From Top
Sketch the Top view of the Stiffener
An open sketch is limited by intersect or extrapolation on the solid
geometry of the current body. A limitation in all directions is necessary.
NF
NF
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Combine
Define a Solid with an intersection of two pads with extrusion directions in one step.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Dress-Up Features
A fillet is a curved face of constant or variable radius. It is tangent to two
surfaces. These three surfaces form either an inside or an outside corner.
You obtain a fillet by propagation along one or several edges.
Edge Fillet
Variable radius fillets are curved surfaces created to a variable radius. That
means that at least two different constant radii are applied to two entire
edges.
Variable Radius Fillet
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The fillet can be created between two faces without intersection or when there
are more than two sharp edges between the faces.
Face-Face Fillet
You can create a fillet between three surfaces. One of the three surfaces is
replaced by a fillet. This fillet is tangent to the three selected surfaces.
Tritangent Fillet
A chamfer consists in removing or adding a flat section from a selected
edge to create a bevelled surface between the two original faces common to
the edge. You obtain a chamfer by propagation along one or several edges.
Chamfer
V5 14
Issue: Draft A6
Part Design
Fillets
The fillet operation create a curved face with a constant radius. The fillet need an edge or a
faces for support.
Limits
Radius
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Object to fillet
Support
Support
Support: Faces on which rolling a sphere. The fillet is tangent to the supports.
Limits: Define the end of the supports
Object to fillet: Edge: Edge which will be filleted
Face: All non tangent boundaries of the face will be filleted
Radius: Radius of the sphere
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Fillets
Trim ribbons
With the option Trim ribbons overlapping fillets will be trimmed by CATIA.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Fillets
Edge(s) to Keep
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
With The Option Edge(s) to Keep one or several Edges can be selected on which the sphere is rolling
instead of one support face.
Edge(s) to keep:
In this case the fillet is
tangent to one Support face
and goes through a curve
(kept edge).
Examples
Edge to keep
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Fillets
Blend Corner(s)
With the option Blend corner(s) the connection point of several edges in one fillet operation becomes
smoother.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Part Design
Variable Fillet
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The fillet operation create a curved face with a variable radius. The fillet need an edge or a
faces for support.
V5 14
Issue: Draft A6
Part Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Variable Fillet
V5 14
Issue: Draft A6
Part Design
Variable Fillet
Variation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The kind of the run between the points can be defined with the variation option:
Cubic
V5 14
Linear
Issue: Draft A6
Part Design
Face-Face Fillet / Tritangent Fillet
Face-Face Fillet
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
A Face-Face Fillet is normally used if two support faces have no common edge.
Tritangent Fillet
A Tritangent Fillet connect two surfaces which are separated by a third surface. The third surface will be
replaced by the fillet.
V5 14
Issue: Draft A6
Part Design
Dress-Up Features
Drafts are defined on moulded to make them easier to remove from moulds.
The characteristic elements are pulling direction, draft angle,
parting element and neutral element
Draft Angle
Shelling a feature means emptying it, while keeping a given thickness
on its sides. Shelling may also consist in adding thickness to the
outside.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Shell
The function Thickness add or remove materiel on the faces which are
selected.
Thickness
The Thread capability removes material surrounding the hole. To define
a thread, you can enter the values of your choice, but you can use
standard values or personal values available in files too.
Thread
V5 14
Issue: Draft A6
Part Design
Dress-Up Features
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Replace Face
V5 14
Issue: Draft A6
Part Design
Draft Angle
Create conical faces on a prismatic geometry
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Neutral element
Draft angle
Pulling Direction
Faces to draft
V5 14
Issue: Draft A6
Part Design
Draft Angle
Neutral and Parting Element
Neutral
Pulling Direction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Neutral
Parting
Neutral
Parting
Neutral
V5 14
Issue: Draft A6
Part Design
Draft Angle
Draft in two directions
Note:
Pulling Direction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Neutral
Parting
V5 14
Issue: Draft A6
Part Design
Shell
Outside thickness
Initial geometry
Initial geometry
Initial geometry
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Inside thickness
V5 14
Issue: Draft A6
Part Design
Transformation Features
Create a translation of the current body. Select a line, edge or plane (to take
its normal) as the translation direction. The original element is no longer
visible but remains in the specification tree. No duplicate available.
Translation
Rotation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Mirror
V5 14
Issue: Draft A6
Part Design
Translation / Rotation
Note: Do not use the translation and
rotation for position the parts in an
assembly!
Translation
Move the current body by a rotation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Rotation
Move the current body by a rotation
Note:
The original elements are no longer visible but remains in the specification
tree. No duplication available.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Symmetry
Create a symmetry operation of the current body by selecting a point, line or plane as reference
element.
Plane
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Line
Point
Note: The symmetry operation must be used for opposite handed parts
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Mirror
Mirroring a body or a list of features consists in duplicating these elements using a symmetry.
Current Solid
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Feature List
Select the features by multi select, the Operation Mirror and the mirroring plane.
Not all features can by mirrored by a feature list.
The feature list cannot be edited.
The mirror done by a feature list can be exploded into single features.
V5 14
Issue: Draft A6
Part Design
Transformation Features
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Circular Pattern
Duplicate geometry of one or more features right away at the
location of a pattern defined by user.
User Pattern
Note:
In the assembly workbench it is possible to reuse pattern for positioning. To benefit from
this possibility, use pattern as standard practice.
V5 14
Issue: Draft A6
Part Design
Rectangular Pattern
Length
Spacing
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Object to pattern
Reference directions
Instances: Number of Copies including the object to pattern
Spacing: Distance between to Copies
Length: Distance between the first and last copy
With the Option Keep Specifications the limitation options e.g. Up to Last of the initial element is
used for all pattern instances .
V5 14
Issue: Draft A6
Part Design
Circular Pattern
Angular Spacing
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Reference Element
Circle Spacing
Object to pattern
V5 14
Issue: Draft A6
Part Design
Circular Pattern
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
pattern origin
Activate
Radial alignment
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Deactivate
Radial alignment
Page 159 of 312
Part Design
Circular Pattern
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
User Pattern
In case of User Defined Pattern, only points which are defined in one sketch can be selected. Single
3D Points cant be used, even if they are all on the same plane.
Object to pattern
(Hole)
Anchor: The Centre of the object to pattern is positioned of the sketch points. If you need an other point
of the initial geometry you must define an anchor.
Anchor
V5 14
Issue: Draft A6
With Anchor
Without Anchor
Initial Situation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Part Design
Pattern Hints and Tips
Deleting an instance of the pattern, the whole pattern will be deleted
Suppress an Instance of the pattern by clicking the small orange dot
If no feature is selected, the current Solid will be pattered.
Pattern based on a feature list
It is possible to pattern a list of Part Design features. These features must belong to the same body. The
body must be set as Define in Work Object.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
You can only get a feature list while the creation of the pattern. You have to multi-select at least two
objects before you click the Pattern Icon.
Note that adding a feature to a pattern is only possible
if your pattern is already based on a feature list.
It is not possible to add
any feature to a basic
pattern created using a
single feature.
V5 14
Issue: Draft A6
Part Design
Reference Elements
Define a point by coordinates, on a curve, on a plane, on a
surface, at a circle centre, tangent point on a curve, and between two
elements.
Point
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Plane
V5 14
Issue: Draft A6
Part Design
Surface Based Operations
Split
Add material to a surface in two opposite directions by using the
thick surface capability.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Thick Surface
Define a body by closing a surface. The sites to be close must be
planar.
Close Surface
Add or remove material by computing the intersection between a
given surface and a body. The surface must completely intersect the body.
Sew Surface
V5 14
Issue: Draft A6
Part Design
Split
Split the current body on a plane or surface.
Split on a surface
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The arrow indicate the side to keep. Select the arrow to invert.
Split on a plane
V5 14
Issue: Draft A6
Part Design
Thick surface
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Sew Surface
The Sew Surface operation integrate a surface in the current body an combine them.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Remove material
Add material
Without the option Intersect body the surface boundaray have to lay down complitly on the triming body
V5 14
Issue: Draft A6
Part Design
Boolean Operations
Assemble a body to another body. The second body will be attached to
the first one.
Assemble
Add a body to another body. Adding a body to another one
means uniting them.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Add
V5 14
Issue: Draft A6
Part Design
Using Boolean Operations (1/4)
Using Boolean Operations
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Add
A fusion of a body to the existing geometry which doesnt define a NC-operation like pocket
or drilling hole. Most common operation, also often used to make a better structure in the
tree. Dont use it for pockets and holes.
Remove
Removes a body from the existing geometry. Only use it for non NC-operations.
Note:
If the Remove is the highest part in the sub-tree, it automatically changes to an Add and
leads to undesired results!
V5 14
Issue: Draft A6
Part Design
Using Boolean Operations (2/4)
Using Boolean Operations
Assemble
Assemble of positive or negative bodies for operations.
Before the Assemble the raw part has a positive volume.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Holes and NC pockets in parts should not be created by Boolean volumes in the raw part,
since these cannot be recognized later as NC relevant operations.
It is also wrong to create the holes as normal pads, you get geometrically the same result,
but the logical structure would be incorrect, since it should be a hole and not a dummy
subtraction body.
Assemble means:
V5 14
Issue: Draft A6
Part Design
Using Boolean Operations (3/4)
Structure Parts with different bodies
Bodies Tree
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Feature Tree
V5 14
Issue: Draft A6
features
The geometry is divided into several
geometrical areas
The bodies must be connected by Boolean
operations
Page 171 of 312
Part Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Using Fillets and Drafts
Fillet and Draft Rules
Draft before Fillet
Fillets should always be added to a part after drafts, since the value of the fillet will be changed and a kind
of variable fillet with different radii will show up. (Exception: draft on reflect line.)
Large Fillets before small Fillets
If the rule is not take into account, it can lead to incorrect geometry and even in special cases to error
messages, since the geometrical creation is impossible.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Link management Sketch (1/5)
Using Sketch from Geometrical Sets (1/2)
and create through it a
Pad (Pad.1) in a new
Body (Body.2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Create a sketch in a
Geometrical Set
(Sketch.1)
Note:
To avoid this duplication of the sketch, create it directly in the body which will
contain the element bearing on the sketch, or cut and paste into that body.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Part Design
Link management Sketch (2/5)
Using Sketch from Geometrical Set (2/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
In this case
Sketch.1 from
Geometrical Set.1
is used to create
Pad.1 and Pad.2.
Changing the
Sketch.1, will
modify both Pads.
In order to
independently modify
the Sketch of Pad.2,
create a new sketch
first. Use copy and
paste to create a copy
of the original sketch.
V5 14
Issue: Draft A6
Part Design
Link management Sketch (3/5)
Copy and paste a sketch from Geometrical Set
Create a sketch in a
Geometrical Set
(Sketch.1)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Link management Sketch (4/5)
Copy and Paste a Body
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Link management Sketch (5/5)
Copy and paste special a sketch from Geometrical Set or Body
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Create a sketch in a
Geometrical Set or a
Body (Sketch.1)
Caution:
the new sketch (Sketch.2)
has a link to the original
sketch and it cant be modified.
V5 14
Issue: Draft A6
Part Design
Link management Publication (1/2)
Published Geometry
Publication is the process of naming elements (geometric features or parameters) with specific tags.
Published elements can be used in one CATPart or for maintaining multi-model links. Published
geometry is similar to that of linked geometry but published elements have a greater level of
associativity.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The Publication command is available in the workbenches Assembly Design, Part Design and
Generative Shape Design and lets you:
Note:
To create Symmetrical Parts or Assembly-Cut Parts it is necessary to publish the PartBody
V5 14
Issue: Draft A6
Part Design
Link management Publication (2/2)
Published Geometry
Tools > Publication
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Material
Apply Material
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Apply
Material
Show Material
Applies customized
view parameters
V5 14
Issue: Draft A6
Part Design
Hints and Tips Searching Elements
To find the graphic representation of an element, select this element in the tree and then MB3 > Reframe on.
The element will be centred inside the document window. It is also possible to search for constraints.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Reframe on
To find out where a visible graphic element is located in the specification tree, select the element and
then MB3 > Center Graph. The element will be highlighted in the tree.
Center Graph
V5 14
Issue: Draft A6
Part Design
Hints and Tips Working with the specification tree
Show / Noshow the Specification tree
With the F3 key the Specification tree can be noshow an show
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Opening Sub-Trees
For a better visualization of the tree, a
part of it can be opened in a separate
window. Select the item, click with MB3
and choose the contextual command
Open Sub-Tree.
V5 14
Issue: Draft A6
Part Design
Hints and Tips Change the Sketch Support
To define a new support for a sketch, use the contextual menu. Select the sketch and
then MB3 > Sketch.x object > Change Sketch Support and then the new sketch plane.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
MB3
V5 14
Issue: Draft A6
Part Design
Hints and Tips To stack Actions
If an additional geometry is needed to create an element (e.g. a reference to create a
line), it is not necessary to close the definition panel. By using the contextual menu (MB3)
in the field where the geometry is needed, its possible to create it (e.g. a boundary)
directly.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
MB3
MB3
V5 14
Issue: Draft A6
Part Design
Hints and Tips Hide Elements
Design geometry (e.g. sketches and planes) must be in the non visible area (hide)
before finishing a part.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
An easy way to hide all elements of one type is to use Tools > Hide in the pull down
menu.
V5 14
Issue: Draft A6
Part Design
Hints and Tips Behavior of Show/Hide
Show/Hide
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Hints and Tips Using multi domain Sketch (1/2)
Using Multi domain Sketch to create e.g. Pockets
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
If a sketch that contains e.g. 4 contours is used for the pocket definition, the
result will be 4 pockets with the same height.
To manage modifications correctly, initially create 4 pockets bearing on 4
contours. The 4 contours can be either in 4 different sketches or in the
same sketch.
For dimensioning contours, it can be
suitable to group them in the same
sketch.
V5 14
Issue: Draft A6
Part Design
Hints and Tips Using multi domain Sketch (2/2)
Using Multi domain Sketch to create e.g. Pockets
However it is possible to access a single contour inside the
sketch while creating pockets.
By selecting the profile in the pocket definition panel, use
the contextual menu (MB3) to get the Go to profile
definition panel. This panel allows a selection of a single
contour inside the sketch.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Remove first
V5 14
Issue: Draft A6
Part Design
Hints and Tips Delete unnecessary elements
In a CATIA V5 Model unnecessary elements (Reference, Wireframe and Surface elements without children) should be
deleted when the design process is finished.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Delete Unnecessary elements is in the Workspaces Part Design and Generative Shape Design (GSD) available:
V5 14
Issue: Draft A6
Part Design
Basic Methods General Modelling Rules (1/2)
Starting the Design Process
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Part Design
Basic Methods General Modelling Rules (2/2)
Finishing the Design Process
Delete all unnecessary elements
Do not use red colours for solids
Every Sketch has to be fully defined by parameters (only if possible)
Rename the Part Body with the Partnumber and publish them.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
When combined with other products such as Part Design, both Wireframe and Surface
Design and Generative Shape Design meets the requirements of solid-based hybrid
modeling.
V5 14
Issue: Draft A6
Line
Point
Projektion
Intersection
Plane
Point
Points and
Planes Repetition
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Parallel
Curve
Spline
Circle
Projection
Circle
Combine
Corner
Reflect Line
Connect
Curve
Extremum
ExtremumPolar
Conic
Line
Parallel
Curve
Spline
Axis
3D Curve
Offset
Helix
Spiral
Polyline
Spine
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Extrude
Offset
Sweep
Fill
Loft
Blend
Extrude
Offset
Sweep
Revolve
Variable Offset
Adaptive Sweep
Sphere
Line
Rough Offset
Conic
Cylinder
Explicit
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Circle
Page 196 of 312
Translate
Join
Split
Boundary
Shape Fillet
Extrapolate
Rotate
Symmetry
Translate
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Join
Scaling
Shape Fillet
Split
Boundary
Affinity
Edge Fillet
Healing
Axis To Axis
Trim
Extract
Curve Smooth
Face-Face Fillet
Multiple Edge
Extract
Untrim
Tritangent Fillet
Disassemble
V5 14
Issue: Draft A6
Create a curve resulting from the intersection of the extrusion of two planar
curves. The extrusions may be normal to the curves or along a direction
Combine
Create a geometry by projecting one or more elements onto a support.
The projection may be normal to the support element or along a
direction
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Projection
Create a wireframe geometry by intersecting wireframe elements,
surfaces or solids
Intersection
Create a curve parallel to a reference curve
Parallel Curve
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sphere
V5 14
Issue: Draft A6
Trim
Performing an extract from elements (e.g. curves, points, solids)
Extract
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Example:
Intersection between a Circle and a plane. The Operation contain to
points which can normally not used for the next operation (e.g. line from
Point to Point)
The Multi-Result
Dialog box appears
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Q-Checker
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
General
Quality Control of Catia V5 Data
Quality Control of Catia V5 Data in a Batch Process
V5 14
Issue: Draft A6
Q-Checker
General
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The Q-Checker controls the data quality of CATProducts, CATParts and CATDrawings.
It checks the compliance with Airbus standards, the structure and the geometry, and
provides automatic correction functionalities. The results of the analysis will be
displayed in an interactive panel. Good data quality avoids a lot of workload in following
process steps (DEX, CNC).
To assure, that errors are detected early so that only a small workload for model
correction will be needed:
Use the Q-Checker from an early stage
Repeat the check regularly, at least daily before storing.
It is advised to check the data only with the AIRBUS administrator profiles
Note:
Only the check performed with the administrator profiles will automatically be taken into
account before
storing in the vault
data exchange
release process
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Q-Checker
Quality Control of Catia V5 Data (1/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Accessing
Q-Checker
from Catia
V5
Start
Q-Checker
V5 14
Issue: Draft A6
Q-Checker
Quality Control of Catia V5 Data (2/4)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The active
Catia model is
checked
automatically
Representation
And
Description
Healing and
close Analysis
Window
Error Categories
Error
Blue
Warning
Results normally in
disadvantages, but cannot be
avoided in certain situations
Green
Error-free
The element is ok
Red
V5 14
Issue: Draft A6
Q-Checker
Quality Control of Catia V5 Data (3/4)
Representation and Description
Zoom
automatically
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Graphic Fine
Analysis
Criterion
Help
V5 14
Issue: Draft A6
Q-Checker
Quality Control of Catia V5 Data (4/4)
Healing and close Analysis Window
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Heal
Automatic healing of
errors according to the
settings in the profile.
Close panel
and restore
Close panel
and keep
current
V5 14
Note:
The automatic healing is not
to be used for transfer to first
permitted layer
Issue: Draft A6
Note:
To do the
modifications,
you have to exit
the Q-Checker
Page 208 of 312
Q-Checker
Quality Control of Catia V5 Data in a Batch Process (1/2)
Q-Checker provides the ability to check more than one model
in a batch process.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
2
3
V5 14
Issue: Draft A6
Pre-selection of CATIA
models (Filetree, CATIA
Declaration Files, Current
Session)
Selection of directory
Selection of models only
the marked model will be
checked
Possibilities to filter the
models for a better selection
Q-Checker
Quality Control of Catia V5 Data in a Batch Process (2/2)
3
4
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
3
4
After the performing of the batch mode check, the output file will be generated in the
specified directory. The output file contains information about the check run and the
model assessments.
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Assembly Design
V5 14
Issue: Draft A6
Assembly Design
Structure and Components
The CATProduct structure is a hierarchical tree composed of items (or nodes). A CAD model
(wireframe, solid, etc.) can be assigned to each item. This model can be positioned in space
within the Assembly Design Workbench. A positioning matrix may be assigned to the link
between the component and the higher sub-assembly. Repetitive parts are instantiated
several times and are therefore assigned several positioning matrices.
Structures are represented in a CATIA V5 specification tree composed of nodes, and
managed by a "parent/child" link system.
Component (Components are
internal sub-assemblies within a
product structure and are not
saved as external CATProduct
files)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Referenced Assembly
(CATProduct)
M2
Sub-Assembly (CATProduct)
M5
M6
CATPart
M7
M8
V5 14
Issue: Draft A6
Assembly Design
Document Modes
Document Modes
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
There are two different document modes available when a product is opened
Visualisation Mode
Visualisation mode opens a significantly lighter model than its true geometrical
form, and can increase the performance. The visualisation mode uses a
geometrical format .cgr (Catia Graphical Representation) that represents only the
external appearance of the component. No Specification Tree available.
Design Mode
Design mode is the original editable format, making all geometrical data available.
Exact geometry is loaded.
If the Option Work with the Cache System is activated (default at AIRBUS) all parts are
loaded in Visualisation mode.
When modification is required on a part it can be converted from visualisation
to design mode by:
MB3 over the part icon > Representations > Design Mode or
double-click MB1 on the part icon
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Assembly Design
Toolbars and Icons Overview (1/2)
Toolbar
Product Structure Tools
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
New
Component
New
Product
New
Part
Replace
Component
Existing
Component
Toolbar
Move
Generate
Numbering
Graph
Tree
Reordering
Manage
Representations
Selective
Load
Multi
Instantiation
Snap
Manipulation
Stop
manipulate
on
clash
Explode
Snap
Smart Move
V5 14
Issue: Draft A6
Assembly Design
Toolbars and Icons Overview (2/2)
Toolbar
Constraints
Contact
Toolbar
Assembly
Not allowed
at AIRBUS
Flexible/
Rigid
Sub
Assembly
Fix
Together
Angle
Create
symmetry
Reuse
Pattern
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Assembly
Features
Coincidence
Offset
Fix
Quick
Constraint
Change
Constraint
Split
Hole
Caution:
Do not use the Flexible / Rigid Sub Assembly command in
the Assembly Design workbench as this causes problems
when assembly trees created with CATIA V5 are converted
to Product structure format
(See AM5012)
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Not allowed
at AIRBUS
Add
Remove
Assembly Design
Product Structure Tools (1/2)
Insert a component into an existing assembly. Components are internal
sub-products within a product structure and are not saved as external
.CATProduct files
New Component
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Assembly Design
Product Structures Tools (2/2)
Number the components of an assembly. You can find these instance
numbers in the properties panel of the components.
Generate
Numbering
Selective
Load
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Assembly Design
Moving Tools
Move a component freehand (translate or rotate) with the mouse by
using the Manipulation Parameters dialog box. The move can be done
with respect to existing constraints.
Manipulation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Snap
Smart Move
Exploding an assembly takes into account the assembly constraints. This
Explode type is applicable when coincidence, constraints axis/axis or
plane/plane are assigned to the assembly
Explode
Compass
V5 14
Issue: Draft A6
Assembly Design
Assembly Constraints Tools (1/2)
Coincidence
Constraint
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Contact
Constraint
Is used to align elements. You may obtain concentricity, coaxiality or coplanarity, depending on the selected elements.
Points, Lines, Planes, Planar Faces, Cylinders Axis, Spheres Point are
elements which can be selected. Their orientation can be defined by choosing
3 options: Same, Opposite, Undefined (with it, the Application will find the best
solution)
Create a contact between two planar Faces. The contact area between the Faces
could be a point, a line or a plane.
Planar Faces, Sphere, Cylinder, Cone and Circle are elements which can be selected.
The contacts Orientation can be external or internal
V5 14
Issue: Draft A6
Assembly Design
Assembly Constraints Tools (2/2)
Does not allow a component to move from its Position during the update operation.
There are two ways of fixing a component: According to the Assembly geometrical
origin (absolute position) and according to the other components (relative position).
Fix Component
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Flexible/Rigide
Sub-Assembly
Not allowed
at AIRBUS
V5 14
Issue: Draft A6
Assembly Design
Creating Assembly Constraints
Creating Assembly Constraints
Note: The active component is blue framed (default colour) and underlined.
It is activated by double-clicking.
Product A
Sub-Product B
Sub-Product C
Part instance 1.1
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sub-Product D
Constraints
V5 14
Issue: Draft A6
Assembly Design
Save Management
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The Save Management command lets you save all or several of your new or modified
documents (CATParts and CATProducts). In the Save Management panel the state (e.g.
opened, modified, new) is displayed.
V5 14
Issue: Draft A6
Assembly Design
Link management
See AM2252 CATIA V5 Multi Model Links
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Assembly Design
Standard Parts (1/2)
Using a Standard Part contained in a
Standard Part Catalog
Standard parts are elements defined by a standard document. They are delivered in a
CATIA V5 catalog named AIRBUS CATALOG.
1.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Key in or select
the AIRBUS
catalog directory
Catalog Browser
Browse another
Catalog
V5 14
Issue: Draft A6
Assembly Design
Standard Parts (2/2)
2.
3.
4.
5.
6.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Note:
If you select Tools > Mechanical Standard Parts > xxx catalogs you will access a
catalog delivered with CATIA V5 (EN, ISO ). This are not AIRBUS standard catalogs!
V5 14
Issue: Draft A6
Assembly Design
Hints and Tips Hide Elements / Search
The functionality Tools > Hide is not available in the Assembly Design.
To hide the same type of elements, use the Edit > Search function from the pull down
menu to find the elements and then click the Hide icon.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Assembly Design
Hints and Tips Positioning of Items (1/4)
The example shows how to position one Part (A) in a specific angle (45 degree) to another cylindrical
Part (B).
1.
Fix Part B
2.
Click the Contact Constraint icon, select External Orientation and then ok
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Part B
Part A
Contact
Constraint
V5 14
Issue: Draft A6
Assembly Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Select the red square at the centre of the compass and drag it onto Part B to snap it
to the cylinder axis
4.
5.
Double click one of the green compass axis to open the Compass Manipulation panel
V5 14
Issue: Draft A6
Assembly Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Define the angle value (45 deg) in the Rotation increment field
7.
V5 14
Issue: Draft A6
Assembly Design
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
9.
Fix Component
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Generative Drafting
View Properties
V5 14
Issue: Draft A6
Generative Drafting
Starting the Drafting Workbench (1/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Starting the Drafting Workbench (2/3)
If the 3D geometry already is open in V5 when using the Start > Mechanical Design >
Drafting it is possible to select between
an empty sheet or the automatic layout.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
OK
V5 14
Issue: Draft A6
Generative Drafting
Starting the Drafting Workbench (3/3)
Drawing frames and title
blocks must be stored
within the Background of
the CATDrawing file
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Titelblock Work arround (1/5)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
1.
V5 14
Issue: Draft A6
Generative Drafting
Titelblock Work arround (2/5)
3. Open the chapter Frames.
4. Select a frame format with double click or with the contextual menu Instantiate
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
component. For the exact positioning the smart pick can be used.
V5 14
Issue: Draft A6
Generative Drafting
Titelblock Work arround (3/5)
5. Break the links to the Catalog document.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Select the componenets insert from the catalogs Catalog objects and use the function
xy Object / Expose 2D Component in the context menu from the right mouse button.
V5 14
Issue: Draft A6
Generative Drafting
Titelblock Work arround (4/5)
7. Check if all links to the catalog document are broken by the function Edit / Links. Only
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
the link type ViewLink and no MML may be shown in the link list.
V5 14
Issue: Draft A6
Generative Drafting
Titelblock Work arround (5/5)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
9. To insert a Text in the title block you have to change to the detailsheet and edit the text
V5 14
Issue: Draft A6
Generative Drafting
General Drafting Rules
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Quality Rules
To assure the overall usage (PDM-System and Release Management)
of the drawings there some rules to follow:
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Toolbars and Icons Overview (1/9)
Sections
Toolbar
Views
(1/2)
Projections
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Unfolded
View
Front
View
Projection
View
View from
3D
Aligned Section
View
V5 14
Details
Break view
Detail
View Profile
Quick Detail
View Profile
Advanced
Front View
Aligned Section
Cut
Offset Section
Cut
Wizard
Isometric
View
Auxiliary
View
Offset Section
View
Clippings
Issue: Draft A6
Detail
View
Quick Detail
View
Generative Drafting
Toolbars and Icons Overview (2/9)
Sections
Toolbar
Views
(2/2)
Projections
Clippings
Details
Wizard
Break view
Clipping View
Profile
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Clipping
View
Breakout
View
Broken
View
Views via the Wizard
V5 14
Issue: Draft A6
Generative Drafting
Toolbars and Icons Overview (3/9)
New View
Toolbar
Drawing
(Working Views
activated)
New Sheet
Instantiate 2D
Component
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
New Sheet
Selected Edit > Working Views or
Edit > Background in the Pull
Down Menu to switch between the
Views and the Background
Toolbar
Drawing
(Background
activated)
V5 14
Bill of Material
Frame Creation
Issue: Draft A6
Instantiate 2D
Component
Generative Drafting
Toolbars and Icons Overview (4/9)
Toolbar
Dimension
Generating
Generating
Dimensions
Step by Step
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Generate Dimensions
Generate
Dimensions
V5 14
Issue: Draft A6
Generate
Balloons
Generative Drafting
Toolbars and Icons Overview (5/9)
Technological Features
Dimensions (TFD)
Toolbar
Dimensioning
TFD
Length
TFD
Details
Radius Diameter
TFD
TFD
Dimensions
Re-route
Dimensions
Create
Interruption(s)
Geometrical
Tolerance
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Angle
TFD
Remove
Interruption(s)
Re-route
Dimensions
Cumulated
Dimensions
Dimension
Length/
Distance
Dimensions
Stacked
Dimensions
Radius
Dimensions
Angle
Dimensions
V5 14
Issue: Draft A6
Chamfer
Dimensions
Diameter
Dimensions
|
Datum
Feature
Coordinate
Dimensions
Thread
Dimension
Coordinate
Dimension
Table
Hole
Dimension
Table
Page 246 of 312
Generative Drafting
Toolbars and Icons Overview (6/9)
Toolbar
Tools Palette
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Projected dimension
Force dimension on element
Force horizontal dimension in view
Force vertical dimension in view
Force dimension along a direction
True length dimension
Intersection point detection
V5 14
Issue: Draft A6
Generative Drafting
Toolbars and Icons Overview (7/9)
Toolbar
Annotations
Symbols
Table
From CSV
Text
Table
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Table
Text
Text
Replicate
Datum
Target
Welding
Symbol
Text with
Leader
Ballon
V5 14
Text
Template
Placement
Issue: Draft A6
Roughness
Symbol
Weld
Generative Drafting
Toolbars and Icons Overview (8/9)
Area Fill
Toolbar
Dress Up
Arrow
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Axis and
Threads
Centre Line
with
Reference
Center
Line
V5 14
Issue: Draft A6
Thread
with
Reference
Thread
Axis Line
and
Centre Line
Axis Line
Generative Drafting
Toolbars and Icons Overview (9/9)
Toolbar
Tools
Analysis
Display
Mode
Sketcher
grid
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Snap to
point
Create
Detected
Constraints
Show
Constraints
Dimension sytem
selection Mode
Filter
Generated
Elements
F1
For the Toolbars Positioning, Analyse, Multi-View,
Dimension generation, Dimension Properties, Profile,
Background and General Tools see the Catia V5 Online
Documentation:
Workbench Indexes > Generative Drafting > Workbench
Description > Command Board
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Generative Drafting
Generating Views (1/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Front View
V5 14
Issue: Draft A6
Generative Drafting
Generating Views (2/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Broken
View
Create a breakout view by modification of an available view.
Breakout
View
V5 14
Issue: Draft A6
Generative Drafting
Generating Dimensions (1/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Datum Feature
Create Text such as Text with Leader, Balloon and Datum Target.
5
Text
V5 14
Issue: Draft A6
Generative Drafting
Generating Dimensions (2/2)
Generate all Dimensions from 3D in one Shot or Step by Step.
Generating
Dimensions
Analysis of dimensions that were generated and possibly re-positioned
on the active view. Dimensions Analysis shows the dimension
interferences.
Dimensions
Analysis
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Generating Instantiations
Create a new Detail Sheet. The geometries created in this sheet can be
inserted in the Drawing sheet.
New Detail
Sheet
Insertion of geometries from Detail Sheet.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Instantiate
2d Component
Insertion of Standard Details with Catalog Browser.
Catalog
Browser
V5 14
Issue: Draft A6
Generative Drafting
Generating Drawings from 3D (1/2)
1.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
2.
3.
4.
5.
6.
Use the Start > Mechanical Design > Drafting pull down menu for starting the
Generative Drafting Workbench. A new CATDrawing will be activated with an empty
sheet.
Insert the drawing frame and the title block in the Background
Select Edit > Working Views
In the same session open an existing part or product (if not already opened)
Use Window > Tile ... to show both the 3D geometry and the drawing
For View creation use either
V5 14
Issue: Draft A6
Generative Drafting
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
7.
Note:
Drawing views generated are fully associative with the 3D model so therefore when a
CATPart/CATProduct requires a modification, the CATDrawing will subsequently require
an update to take into account the changes.
The drawing can be checked at any time to make sure the links are maintained with the
3D model. This is done using Edit > Links.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Generative Drafting
Changing the Drawing Scale
In order to avoid the loose of associativity, the views scale must be changed only in the
Properties window and not by overwriting in the Text field of the view.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Move the cursor to the view frame and click the MB3 to open the contextual menu
Select the Properties option
Modify the scale of the view
V5 14
Issue: Draft A6
Generative Drafting
Modify the View Projection Plane
After creation of the Front, Projection and Detail Views the projection plane of the Front
View can be changed:
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Select the Front View and click MB3 to open the context menu:
V5 14
Issue: Draft A6
Generative Drafting
Overload Properties
In the Overload Properties can be set, how a Part should be represented in the section or
in the projection view .
Move the cursor to the view frame and click the MB3 to open the contextual menu
Select Front view object > Overload Properties option
Select an element in the Characteristic list
Click on Edit to open the Editor
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
View-Link
Vi
e
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
w-
Li
nk
View-Link
Replace 3D Document
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
1.
2.
3.
V5 14
Select the option Loaded Document and select the new Dawing in the list
Issue: Draft A6
Generative Drafting
Plot / Print (1/2)
To print or to plot the drawings, click on the function 'Print' from the 'File' menu.
It is possible to print/plot the drawings in the actual or in a modified sizes.
The choice of the printer and the settings to Page Size and Page Position take place in the 'Print' menu.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
2
3
Use Tools > Image > Capture to capture a selected region!
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
Generative Drafting
Plot / Print (2/2)
Choose of Printer
Print Preview
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
Generative Drafting
Hints and Tips - View Properties
The generation of the geometry is
predefined in Tools > Options >
Mechanical Design > Drafting >
Generation.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
DMU Introduction
Basics
General
Design Review
Document Modes
Cache Management
Memory Allocation
Activate / Deactivate
Load / Unload
Toolbar Overview
Toolbar Measure
Toolbar Analyse
Measure
Clash Computation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
DMU Navigator
Toolbar Overview
Toolbar View
Toolbar DMU Viewing
Toolbar Navigation Tools
Toolbar Data Navigation
Toolbar DMU Move
Toolbar DMU Generic Animation
Fly Mode
V5 14
Issue: Draft A6
DMU Introduction
Basics General
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The DMU Workbenches are integrated into Catia V5, the application must not be changed.
Within the DMU Workbenches you will worked mainly in the visualization mode. Original geometries
can be used by switching from the visualization mode in the design mode.
All results calculated in the DMU Workbenches (Distance, Measure, Group, Sectioning, ) are filed
in the CATProduct under the entry "Applications" in the tree. They are assigned to the highest node
and are stored in the CATProduct.
V5 14
Issue: Draft A6
DMU Introduction
Basics Design Review
DMU Navigator
General Process
Visualize geometries
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
2D/3D Annotation
Group
Spatial Query
Create one or more Scene for comparing the
different Assemblies
Exact positioning Snap of Parts by taking the
geometrical elements into account (lines,
points, planes, ...)
Generating of animation (*.avi)
Analyse geometries
DMU Analysis
V5 14
Issue: Draft A6
DMU Introduction
Basics - Document Modes
Document Modes
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
There are two different document modes available when a product is opened
Visualisation Mode
Visualisation mode opens a significantly lighter model than its true geometrical
form, and can increase the performance. The visualisation mode uses a
geometrical format .cgr (Catia Graphical Representation) that represents only the
external appearance of the component. No Specification Tree available. No axis
and wireframe geometry is visible. No plus sign is visible in front of the
components in the tree.
Design Mode
Design mode is the original editable format, making all geometrical data available.
Exact geometry is loaded.
If the Option Work with the Cache System is activated (default at AIRBUS) all parts are
loaded in Visualisation mode.
When modification is required on a part it can be converted from visualisation
to design mode by:
MB3 over the part icon > Representations > Design Mode or
double-click MB1 over the part icon
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
DMU Introduction
Basics Cache Management (1/3)
Working with the Cache System
CATProduct
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Insert an Existing
Component
(e.g. Part1.CATPart)
or
Open a CATProduct
which includes at
least one Part
Catia V5
Part1 loaded in
visualisation mode
Tessellation
Local Cache
Part1.CATPart.timestamp.cgr
It is possible to work with a released cache. A released cache is a read-only cache that can
be located anywhere on the network and several directories can be defined for this cache.
V5 14
Issue: Draft A6
DMU Introduction
Basics Cache Management (2/3)
When this component will be required again, the .cgr file which already exists (and not the
original document) is automatically loaded from the local cache.
Before the loading of the .cgr file, its timestamp will be checked to verify that no
modifications have been made to the CATPart since the generation of the .cgr file.
If the timestamp is out of date, the CATPart will be re-tessellated.
Insert an Existing Component (e.g. Part1.CATPart) or Open a CATProduct which includes at least one Part
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
No
Check if timestamp ok
Yes
No
Check if .cgr exist in the released cache (e.g. fc/d21w1 in the ROA)
Yes
No
Check if timestamp ok
No
Yes
V5 14
Issue: Draft A6
DMU Introduction
Basics Cache Management (3/3)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
To view the contents of the cache use Tools > Cache Content in the DMU
Navigator Workbench
V5 14
Issue: Draft A6
DMU Introduction
Basics Memory Allocation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Icon
Function
Impact
Edit/
Delete
delete
load
unload
activate
deactivate
design mode
visualisation
mode
hide
show
Models will be transferred from the no-show area in the show area,
no additional RAM is covered
V5 14
Issue: Draft A6
Comment
DMU Introduction
Basics Activate / Deactivate
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Grey axis:
Deactivated
Red axis: Activated
Note:
If Tools > Options > Infrastructure > Product Structure > Product Visualization >
Representation: Do not activate default shapes on open is selected, all geometry will be
deactivated while loading.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
DMU Introduction
Basics Load / Unload
Unloaded
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Loaded
Note:
If Tools > Options > General > Referenced Documents: Load referenced documents is
selected, only the structure will be loaded.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
DMU Introduction
Navigator Toolbar Overview 1/4
Toolbar
View (Examine mode)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Fly Mode
Toolbar
View (Fly mode)
Fly
Examine Mode
Turn Head
V5 14
Decelerate
Accelerate
Issue: Draft A6
DMU Introduction
Navigator Toolbar Overview 2/4
Toolbar
DMU Viewing
Previous View
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Look At
Manage
Annotated
Views
Create an
Annotated
View
CATIA V5 Basic - Presentation
V5 14
Magnifier
Next View
Toolbar
Navigation Tools
Issue: Draft A6
Depth Effects
Lighting
Add
Hyperlinks
Horizontal
Ground
Group
Sectioning
DMU Introduction
Navigator Toolbar Overview 3/4
Toolbar
Data Navigation
Spatial Query
Search
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Go to
Hyperlinks
Current
Selection
Panel
Applicative Entities
Reordering
Start Publish
Toolbar
DMU Move
Cumulative
Snap
Translation
or Rotation
V5 14
Issue: Draft A6
Reset
Position s
Symmetry
DMU Introduction
Navigator Toolbar Overview 4/4
Toolbar
DMU Generic Animation
Clash
Detection
(Off)
Track
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Play a Simulation
V5 14
Edit
Sequence
Record Viewpoint
Animation
Track
Colour Action
Visibility Action
Issue: Draft A6
DMU Introduction
Navigator View
Navigating in examine mode is the default mode. Documents can be examined from the outside
by moving around the perimeters, or from the inside by turning the head to view or moving
closer to different objects.
Examine Mode
In Fly mode, you can move upwards or downwards on any horizontal view plane. You can also
move forwards or backwards.
Fly Mode
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
In Walk mode, you can walk forwards and backwards as well as turning right or turning left.
You can also walk along the horizontal plane
Walk Mode
In Walk mode or Fly mode it is possible to use the Turn Head function.
Turn Head
V5 14
Issue: Draft A6
DMU Introduction
Navigator DMU Viewing
Visualisation of an On-Screen detail by using the button.
Look At
Create a separate window where the enlarged details of a document will be displayed.
The complete environment is permanently visible.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Magnifier
Achieve 3D depth effects by clipping geometry on a plane parallel to the screen and creating
fog effects. After closing the function the clipping planes are still active. Only in deactivating
the clipping planes will the components be complete again.
Depth Effects
Visualise a plane at the ground level of the document, this enables to recognise if the
document is positioned in the right direction.
Horizontal Ground
Variation of ambient lighting effects. It is possible to change the lighting direction,
brightness, contrast and highlights.
Lighting
V5 14
Issue: Draft A6
DMU Introduction
Navigator Navigation Tools
Generate text fields and marker in a stored view. When moving the view the texts
disappear. The function is usable within a section.
Annotated View
Create a comment to describe a problem or to document a message. The comment is
permanently visible.
3D Annotation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Define a group of Objects by individual selection. Groups can be stored in the document.
Group
Enable: To work on the evolution of an assembly in a separate window from the actual
assembly, Or to save a copy of an assembly in a separate window, work on the development
directly on the assembly.
Create Scene
V5 14
Issue: Draft A6
DMU Introduction
Navigator Data Navigation
Search for an object with a specific name, or with a specific type or colour.
Search for product properties or objects created using a specific workbench, in a
current document or throughout the whole product structure.
Search
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Spatial Query
Start Publish
V5 14
Issue: Draft A6
DMU Introduction
Navigator DMU Move
Move a set of components by using the parameters in the Move dialog box.
Translation or Rotation
This allows the definition of an environment with additional constraints a
components reducing degree of freedom
Cumulative Snap
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
DMU Introduction
Navigator DMU Generic Animation
The simulation player is available every time you create a track, a sequence or when you
simulate your track.
Simulation Player
Recording of viewpoint animations either using the fly/walk command or direct manipulation
of the geometry. A replay is automatically created for each new viewpoint recording.
Record Viewpoint Animation
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
DMU Introduction
Navigator Fly mode
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Beginning of the fly phase. In the middle of the screen a target point appears. On
lower screen border there is a green arrow which shows the fly direction. Under the
arrow the current airspeed is indicated.
The fly direction can be steered with the mouse. The deflection depends on the
distance between mouse pointer and target point.
Button Screen up / Screen down makes possible to adjust the speed.
Click MB1 again to change the direction of the flight (Change from forward to
backward)
To finish the flight mode switch back into the "Examine mode
Use View > Render Style > Parallel to exit the perspective projection
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis Toolbar Overview 1/2
Toolbar
DMU Space Analysis
Compare
Products
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Sectioning
Clash
Distance and
Band Analysis
Measure
Item
Measure
between
Measure
Three
Points
Measure
Inertia
Create an
Annotated
View
3D
Annotation
Group
Manage
Annotated
Views
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis - Measure
Measure the minimum distances and angles between geometrical entities
(surfaces, edges, vertices and entire products) or between points.
Measuring within a section is possible.
Measure between
Measure the properties associated to a selected item (points, edges
surfaces and entire products).
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Measure Item
Measure the length, radius and angles of an arc drawn through three
points.
Measure Three Points
Measure the inertia properties of an object. To store the results in a text file
click the export icon.
Measure Inertia
Measure a minimum distance, distances along x,y,z, or run a band analysis
by defining the band and setting the accuracy.
Distance and
Band Analysis
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis Analyse
Detect interferences between two or more products. It is possible to read or
compare clash command results in the Check Clash dialog box. The interferences
will be shown in a preview window.
Clash
Define a sectioning of one or more products by creating a section plane, a section
slide or a section box.
Sectioning
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Compare two parts or two products to detect differences between them and identify
where material has been added and/or removed.
Compare Products
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis Toolbar Overview 2/2
Sectioning Definition Panel
Sectioning tools
Edit
Geometrical
Invert
Position Target
Normal
And
Positioning by
Dimension
2/3 Selections
Reset
Position
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Volume
Cut
Section
Plane
Section
Slice
Export
As
Edit
Grid
Results
Window
Section
Fill
Clash
Grid
Detection
Section
Box
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis - Measure
Measurements can be executed in tessellated and native geometry. If native geometry
(design mode) is measured, the exact values are calculated. With the tessellated
geometry the value is approximated. This is made recognisable by a tilde (~).
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Tessellated files (cgr) allow no selection of corners, edges and surfaces. To be able to use
also this functional character, the mode must be switched from the visualization in the
design mode. This must take place before the beginning of the measurement procedure.
To avoid unnecessary post loading times, only the geometry which will be measured native
should be loaded.
Note:
The results of the functions Clash, Distance, Band Analysis and Section are always based
on the approximate representation. By working with cgrs it is the SAG value, by working
without Cache or in the design mode it is the 3D Accuracy.
Only the function Measure Between guaranteed exactly measured values.
The Value of 3D accuracy will be used for the transformation of data in tessellated shape
automatically. The value can be changed later. If there is a difference between the SAG of
the tessellated Part and the 3D accuracy, the SAG will be used for viewing.
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
DMU Introduction
Space Analysis Clash computation
Contact+Clash
Clearance+Contact+Clash
Allow negative Penetration depth, e.g. for
flexible Parts
Clash
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Apply
Clash: Red
Contact: Yellow
Clearance: Green
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
CATIA
V5
System settings
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
System settings
Tools - Options
Document search
Display Accuracy
Display of Geometry
Part Update
Assembly Update
Cache Management
Part Number
External References
Product Visualization
Tree Customization
Display in Specification Tree
UNDO Steps
V5 14
Issue: Draft A6
CATIA
V5
Tools - Options
Tools - Options
Settings (Tools - Options)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
In this chapter often needed settings are explained for better understanding, user control
and system performance.
General information
A red closed padlock setting is created by the administrator and cannot be modified by
the user.
An grey open padlock setting can be activated or deactivated (hook, input command or
path and so on).
V5 14
Issue: Draft A6
CATIA
V5
Document search
Document search
General - CATIA document search
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
This defines the possible paths to look for documents single CAD models or linked in
products (Load referenced documents).
V5 14
Issue: Draft A6
CATIA
V5
Display Accuracy
Display Accuracy
General Display performance
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
The Accuracy has a great influence in the time needed for rendering your geometry.
Therefore keep the standard value or switch back to this value after temporary use of
better display e.g. for screen shots.
V5 14
Issue: Draft A6
CATIA
V5
Display of Geometry
Display of Geometry
General Display - Navigation - Selection
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
This defines the way the geometry is shown before or after selecting.
V5 14
Issue: Draft A6
CATIA
V5
Part Update
Part Update
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Updating Parts
Infrastructure Part Infrastructure General Update
These options define the system update
for Parts (Solids and Surface Design).
An automatic update works suddenly on
every modification. If You want to make
more modifications at once You should
change the setting to manual update to
save time.
V5 14
Issue: Draft A6
CATIA
V5
Assembly Update
Assembly Update
Updating Assemblies
Mechanical Design Assembly Design General - Update
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
Cache Management
Cache Management
Cache Management
Infrastructure Product Structure Cache Management
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
Part Number
Part Number
Correct naming for new parts
Infrastructure Product Structure Product Structure Part Number
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Otherwise: Inconsistency
CATIA V5 Basic - Presentation
V5 14
Issue: Draft A6
CATIA
V5
External References
External References
External References and Links
Infrastructure Part Infrastructure General External References
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
Product Visualization (1/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
Product Visualization (2/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
Tree Customization (1/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
1
2
1.
2.
Position in tree
Displayed or not
CATIA
V5
Tree Customization (2/2)
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Example:
V5 14
Issue: Draft A6
CATIA
V5
Display in Specification Tree
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
CATIA
V5
UNDO Steps
UNDO Steps
General - UNDO steps
Here the possible number of UNDO steps is defined.
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Increasing this number will influence your system performance especially on big
assemblies and part modifications.
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
V5 14
Issue: Draft A6
AIRBUS DEUTSCHLAND GmbH. Alle Rechte vorbehalten. Vertrauliches und geschtztes Dokument.
Document Control
Issue
Date
Writer(s)
Draft A1
21 Sep 2004
Initial Issue
Michael Schwartz
ACE Academy
Draft A2
03 Jan 2005
Michael Schwartz
ACE Academy
Draft A3
10 Oct 2005
Marcus Bendel
ACE Academy
Draft A4
26 Oct 2005
Marcus Bendel
ACE Academy
Draft A5
29 Oct 2006
Marcus Bendel
ACE Academy
Draft A6
29 Mar 2007
Volker Kowald
ACE Academy
V5 14
Issue: Draft A6