voy Mea OI ee
DOUBLE HELICAL
yeaa alPoo tk ke im eo
superior reliability over other types.
The MP pump Is designed to be more efficient at high temperatures and pressures and virtually eliminates user problems of
‘operating in severe environments. Problems such as high suction pressure, high total pressure and high liquid
temperature no longer exist.
+ The reliability and durability of the MP series pump has been proven by its use in over 5,000 locations worldwide.
+ It has no problems working at a differential pressure of 20 kg/cm? at the seal. The pump is ideal for high pressure
processes.
+ It includes a special Mycom developed relief valve which is attached to the body of the pump that allows for its use
elimination. There is no need to install an extra valve (o adjust the pressure.
‘The double helical screw type oil pump provides the following benefits:
THREE SUPERIOR BENEFITS WHICH SATISFY WITH THE CUSTOMER’S NEEDS.
aCe ee ed
Peat
Enea
Serra
Coogee eae
een men ete
* Tho pump is just ono of the components provided to meke the
moin equipment work properly. Neveriheless, its the pump thot
gives abscluie security to Ihe device's cpacily, That is why the
pump must be more reliable thon other parts
“+ The pumo with treditionel gearing has @ hidden flaw of leckage
ct mechorical seal. Mycom reviewed and developed the seal
design which it used on the original mechanical seal of Mycom
screw compressor, that does not cllow leakage
‘+ Our mechanical seal hes a floating structure of balanced and
static type, Ithos resistance to high speed and high pressure wih
‘ut suffering ony distortion
‘= When selecting the materials, we have been careful thatthe her
motecisin is net affected by high resistance against friction, heat
end corrosion,
+ For the conloet surface of seal end, we use corbon silicon, thot
has half ofthe friction coefficient ofc cemented clloy and for the
slate side we use genuine carbon that has high density ond a very
fine groin
+ Asc result ef our ongoing sludy of the design and moterial of
the seal, we cecomplished the sealing quality that endures the
cexial high pressure at 30kg/em? (426 psi)
+ In.on era when saving energy is at premium, the overall eff
ciency of Mycom oil pump nol only saves energy but lowers the
{otal opercting cost
* The efficiency of the traditional gear pump can only reach
75% ond under increased pressure diferentils, the overall eff-
ciency will diop down to even less thon 50%,
+ Mycom analyzed the efficiency losses of the tooth shaped
{geors and by using our helical screw design, we have improved
elfciencies that reach 86% with differentol pressures of 15
kg/em? (213 psi.
+ The rotor design of Mycom oil pump has minimized the contact
points that accomplished the shaft maneuvering without irtegu
Inies between Mole and Female rotors assuring the improved
performance
*# The doubla helical thrust afsat design as well as the closor
clacrance between the rotors cecomplishad the beter efficiency
cf 20 t0 30% ever the traditional pumps* Up unil now, the equipment manufacturers and the CEM have
had to install on odditional relief valve to compenscle for the flue
Ivating pressure which requires ext time end cckltional expenses,
‘= Mycom's unique internal relief valve design eliminates the ad
tional pars, intollation and maintenance cost
* Customers have had meinlenance problems with sludge
developing inside the slo's ond external pressure relief velve
Mycom’s internal relief valve eliminates the area to deposit sludge
and removes the addionel maintenance requirements,
* This exclusive piston type elif control easily responds to the
chenge of the liquid pressure and allows the pump to operate
smoothly
+ This unique piston design alo ellows the pressure from both
sides ofthe piston thot promise the valve performance to operaie
without any noise ond chatering hus result in the longer life
expecaney of the puinp
Internat Prassure Reto av,
* The comporison of the displacement between Myeom cil pump
cand others shown bellow explains how wider performance range
the Mycom pumps cover.
* Three different Mycom models covers the range of olmost ten
different medels of ether manufacturers. Evenivelly the service
pals required for stock or for maintenance can be minimized
‘when using Mycom oil purnp.
OTHER MODELS ~RMEYCOM
Viscosity: 100 est
z
&
5
g
:
sg
g
Gq
6 2468 1
Pressure Differential (Ka/em2).Structual Advantages
(4: Ie: Ie: We: WH: e->
Special rotors ‘Optimum — evetion” Specia rotor shatt High resistance Casing and cover
nd discharge ports mechanical sea,
Saath rlaion due + Special matt as
+ pubis assign ana
+ smoctn response to fomust ofset" eto Optrum portdesgn wall as woamrant | = alancedtype sive. tates) gst Na
th'changs in pee” ceslgn, ‘came soc had promse longer ie | tye eimeates the pressure,
ue ‘ana. epecranoy Teskage,
sph evabiy Son assures he . Special mater
Smoot erin ge a) ties te ener
+ Slusge Fee suc = fecttance again 8s
“lowed High rai Speci rust bear. leskagn
™ + No suaten pressure
+ Higrar rata and e
ual.
—_— —_— —_— —_— = —_—
= Consistent hgh
Susity ane peor.
Loss BHP ang eiger csp scemert hat leads to
beter cveal sticenay,
+ Consstrt nigh peremasce wan under
Figher schon presse
+ Quiet operation due to continue suction and
‘scharge operate
Minize te power cost * Eimnate mechanical esl leakage and pump
cables,
+ Seout rom nl,
+ No seonal
‘pense re!
‘he thurs bearing,
+ Longerite expectancy.
ee + Maximum discharge pressure: 20kg/em? (284ps1).
+ Suction and discharge pi 2 20kgiem?
Pressure regulating valve adjustable range: 1-4kg/em?
(142-56. psd.
+ Maximum oll temperature 130°C (26°F).
+ Viscosity: 3-500csT.area bas To
BO] BO.
Tom
425,
TROT TI
7a te
zie rez
265 1957,
RECLYETID
358/349
4097437
S427 624
“ 55405,
60] sta 607
960} 747 882
[iso | “6027675
igor ap
OF Wh egulaing ve
1MBQe : Roto of amet (2 rot equating va
'Ma0P ‘Rosa of mol “one
IMi00P “otro ameter of 100mm
+ Ou cemperacure
soles 8: (Sancara} Normal {aximum 80°C)
4 four pokes High) Temperate high (maximum 130°C)
5 Sepaes
8 P Eight poles
1008 spe
1258gayDa
MBOP-6PM