You are on page 1of 1

POWER SYSTEM 1 (EEPB353)

QUIZ 10 (Transformer)

20

Write the answers on this paper itself. Time allocated is 40 minutes


Name: ________________________________________________________

ID No.:__________________

Name: ________________________________________________________

ID No.:__________________

A 2 kVA, 250/125V transformer has been tested to determine its equivalent circuit. The data below
shows all the results which are taken from the high voltage side:
Open Circuit Test

Short Circuit Test

VOC = 250V
IOC = 0.5A
POC = 35W

VSC = 100V
ISC = 8A
PSC = 25W

i.

Determine the equivalent circuit parameters Rc, Xm from the Open Circuit Test.

[4 marks]

ii.

Determine the equivalent circuit parameters Re, Xe from the Short Circuit Test.

[4 marks]

iii.

Draw the final equivalent circuit referred to the high voltage side. [6 marks]

iv.

Determine the voltage regulation and efficiency for this transformer when it is supplying rated
full load at 0.85 power factor lagging. [6 marks]

SEMESTER 1 2015/2016

You might also like