ATTACHMENT 1. @ smsanonere
NUMBERING SYSTiM EP doy egg
DEMONSTRATION H2 :
DOC.No. : A11226-PR-11 -MONSTRATION H2 | pate of tes Oct 12.2012
Rev.No : Job No. : A11226 Page : 5 of 8
Table Service Code
Service Name Code Service Name Code
Feed P Waste Gas to Flare FL
~yarogen w_ [Sea Goring Water | sws
TalGas [|e [Rencoo water [swe
4, INSTRUMENT NUMBERING SYSTEM
Instrument numbering shall be as outlined below
XX - PG - 0111 - AB
Sufi, if required Serial
——- Funcional Serial No. ( See Note.2 )
—- Serial No. of Adsorber for Functional Valve
—— PBID No.(01, 02, 03)
-——- Symbol of instrument (Refer to table.3)
es Unit number (not indicated in P&ID tag
but used in instrument specification / list)
Note.
1, Instrument depiction shall be as per ISA. The rel2vant table for the alphabetic depiction
of instrument type is included in drawing No. (LATER).
2. In the four-digit instrument serial number, the digits shall be used as follows.
First 2 digits: Same as last 2 digits of P&ID serial number, where this instrument
appears.(01, 02, 03)