Professional Documents
Culture Documents
http://www.tp-link.com/gr/article/?faqid=383
How to use Multi-NAT function on TP-LINK modems( IP address mapping for multiple IP servers)?
(Trendchip Solution)
Suitable for: TD-8816, TD-8817, TD-8840T, TD-W8901G, TD-W8951NB, TD-W8951ND, TD-W8961NB, TD-W8961ND
1 of 5
2/7/2015 6:27 AM
How to use Multi-NAT function on TP-LINK modems( IP address mapping for multiple IP serv...
http://www.tp-link.com/gr/article/?faqid=383
Step 2:
Manually configure Static IP address for you internal servers. Here in the example, we use 192.168.1.10-14.
Step 3:
On the top menu, please go to Advanced Setup ->NAT, select your current PVC. Select Multiple and click IP Address Mapping(for Multiple IP Service).
2 of 5
2/7/2015 6:27 AM
How to use Multi-NAT function on TP-LINK modems( IP address mapping for multiple IP serv...
http://www.tp-link.com/gr/article/?faqid=383
Notes: If the Virtual Circuit is incorrect, there will be no options. You can go to Status page to check which PVC you are using. Usually, there are IP
parameters behind the correct PVC.
Step 4:
Add five rules like the picture below:
The first rules public start IP is 0.0.0.0, it is for modems WAN IP:88.34.223.22.
3 of 5
2/7/2015 6:27 AM
How to use Multi-NAT function on TP-LINK modems( IP address mapping for multiple IP serv...
http://www.tp-link.com/gr/article/?faqid=383
With such settings, when visit the Public IP, the connection will be forwarded to the internal matched server directly.
4 of 5
2/7/2015 6:27 AM
How to use Multi-NAT function on TP-LINK modems( IP address mapping for multiple IP serv...
http://www.tp-link.com/gr/article/?faqid=383
If you still dont know how to configure you modem, please feel free to contact us. support@tp-link.com
5 of 5
2/7/2015 6:27 AM