Professional Documents
Culture Documents
Altra Scienza - Rivista Free Energy N 01 - Nikola Tesla PDF
Altra Scienza - Rivista Free Energy N 01 - Nikola Tesla PDF
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Fonte: http://www.totse.com/en/fringe/fringe_science/40laws.html
34
The Plenum is a bi-monthly newsletter with a subscription rate of
$25.00 per year. Please make checks or other donations, contributions
or subscriptions to Vangard Sciences. Thank you for your interest.
"Ye shall know them by their works"
Your comments and support are appreciated!
Page 1
35
natural pitch simultaneously oscillate with the same frequency, whether
the pitch of the medium be a unison of any harmonic of the fundamental
pitch of the creative aggregate.
7. Law of Attraction:
Juxtaposed coherent aggregates vibrating in unison, of harmonic
ratio, are mutually attracted.
8. Law of Repulsion:
Juxtaposed coherent aggregates vibrating in discord are mutually
repelled.
Page 2
9. Law of Cycles:
Coherent aggregates harmonically united constitute centres of
vibration bearing relation to the fundamental pitch not multiples ofthe
harmonic pitch, and the production of secondary unions between
themselves generate pitches that ate discords, either in their unisons,
or overtones with the original pitch; from harmony is generated
discord, the inevitable cause of perpetual transformation.
10. Law of Harmonic Pitch:
Any aggregate in a state of vibration develops in addition to its
fundamental pitch a series of vibration in symmetrical sub-multiple
portions of itself, bearing ratios of one, two, three, of more times
its fundamental pitch.
11. Law of Force:
Energy manifests itself in three forms; Creative the vibrating
aggregate: Transmissive, being the propagation of isochronous waves
through the media in which it is immersed; Attractive, being its action
upon other aggregates capable of vibrating in unisons or harmony.
12. Law of Oscillating Atomic Substances:
Coherent atomic substances are capable of oscillating at a pitch
varying directly as the density, and inversely as the linear dimensions
from one period of frequency per unit of time to the 21st octave above,
producing the creative force of Souity, whose transmissive force
36
(Sound) is propagated through the media of solids,liquids, and gases,
and whose stated effect (Sonism) produces attractions and repulsions.
13. Law of Sono-thermity:
Internal vibrations of atomic substances and atomic molecules are
capable of vibrating at a period-frequency directly as their density,
inversely as their linear dimensions, directly as the coefficient of
their tension from the 21st to the 42d octaves, producing the creative
force (Sono-thermity), whose transmissive force (Sono-therm) is
propagated in solid, liquid, gaseous, and ultra-gaseous media,
statically producing adhesions and molecular unions, or disintegration,
according to the Law of Harmonic Attraction and Repulsion.
14. Law of Oscillating Atoms:
All atoms when in a state of tension are capable of oscillating at
a pitch inversely as the cube of their atomic weights, and directly as
their tension from 42 to 63 octaves per second, producing the creative
force (Thermism), whose transmissive force (Rad-energy) propagated in
solid, liquid, and gaseous ether, produces the static effects (Cohesion
and Chemism) on other atoms of association, or dissociation, according
to the Law of Harmonic Attraction and Repulsion.
Page 3
37
atoms, by twisting them produces striae, increases the resistance,
etc. Between parallel wires and through air the induction takes
place from large areas through a rarefied medium composed of a
mixture of substances, whose atoms are separated by waves of
repulsion of various pitches, discordant to electric vibrations;
the said atoms sympathetically absorb the vibrations and dissipate
from themselves, as centres, concentric waves of electric energy
which produces heat and gravism.
16. Law of Oscillating Atomoles:
Atomoles oscillating at a uniform pitch (determined by their
uniform size and weight) produce the creative force Atomolity, whose
transmissive form, Gravism, is propagated through more rarefied media,
producing the stated effect upon all other atomoles, denominated
Gravity.
17. Law of Transformation of Forces:
All forces are different forms of Universal Energy unlike in their
period-frequency, merging into each other by imperceptible increments;
each form representing the compass of 21 octaves. Each form or pitch
may be transformed into an equivalent quantity of another pitch above
or below it in the scale of 105 octaves. The transformation can occur
only through its static effect, developing vibrations of harmonic
pitches above and below their fundamental vibration, or developing with
juxtaposed aggregates, resultant and difference, or third order, as the
case may be.
Scholium: A table of the intervals and harmonics of the normal
harmonic scale will indicate the ratios in which the
transformation of
forces will occur.
Page 4
38
Scholium: Atomic pitches are more important working data then
atomic weights; tables of atomic pitches must be precise.
19. Law of Variation of Atomic Pitch by Rad-energy:
The higher harmonics and overtones of projected rad-energy are of
a pitch sufficiently high to cause the atom to expand: by causing the
atomoles to vibrate systematically the same influence will cause the
atom to contract, and thus by changing the volume, atomic pitch is
varied.
20. Law of Variation of Atomic Pitch by Electricity and Magnetism:
Electricity and Magnetism produce internal vibration in the atom,
which are followed by proportional changes in volume and, therefore,
pitch.
21. Law of Variation of Atomic Pitch by Temperature:
Atoms in chemical combination oscillate with increasing amplitude
directly as the temperature, and simultaneously absorb overtones of
higher harmonics, producing expansion of volume and diminution of
pitch.
Rule: The gradual approach of the temperature of harmonic
combination can be observed by mutually comparing superimposed
spectra; chemical combination commences when the fundamental lines
of each spectrum bear harmonic ratios by linear measurement.
22. Law of Pitch of Atomic Oscillation:
Atoms not isolated and in a state of tension between forces that
oppose and increase the equilibrium oscillate bodily at a pitch that is
a resultant of the atomic weight, atomic volume, and tension.
23. Law of Variation of Pitch of Atomic Oscillation by Pressure:
The frequency of atomic oscillation increases and diminishes
inversely as the square of the pressure.
Page 5
39
The force of cohesion diminishes inversely as the square of the
distance the atoms are apart, and the force of the chemical affinity
diminishes in the same ratio. Heat increases the amplitude of the
oscillations in a direct ratio to the temperature of the natural scale.
Scholium: New thermometers and accurate thermometric tables, on
the natural bases, wherein doubling the temperature doubles the
pitch of the transmissive energy, are required. Such a table of
temperature will bear natural relations to atomic weights,
pitches, specific heats, chemical affinities, fusions,
solubilities, etc., and will disclose new laws. One table for each
must be constructed.
25. Law of Variation of Atomic Oscillation by Electricity:
The electric current destroys cohesion and chemical tension
directly as square of current in amperes, inversely as the resistance
in ohms, inversely as the chemical equivalent, and conversely as the
coefficient of the difference between the freezing and volatilizing
temperature of mass acted upon.
26. Law of Variation of Atomic Oscillation by Sono-thermism:
Diminishes the tensions directly as the quantity of heat developed
and in antithetical proportion to the harmonics absolved.
27. Law of Chemical Affinity:
Atoms whose atomic pitches are in either unison, harmonic or
concordant ratios, unite to form molecules.
Corollary: When two atoms are indifferent, they may be made to
unite by varying the pitch of either, or both.
Scholium: This necessitates the construction of tables
representing variation of atomic pitches by temperature, pressure,
etc.
Scholium: Tables of all harmonics and concords, and harmonics
founded upon a normal harmonic scale, are equally essential.
Scholium: Optical instruments may be made to measure pitches of
energy.
28. Law of Chemical Dissociation:
If the pitch of either atom, in a molecule, be raised or lowered:
or, if they both be unequally raised of lowered in pitch until the
mutual ratio be that of a discord; or, if the oscillation amplitude be
augmented by heat until the atom are with the concentric waves of
attraction, - the atoms will separate.
40
Page 6
41
energy, such undertones of which are absorbed as are a harmonic or
harmony of the electric pitch; the amount of energy absorbed being
directly as the arithmetical ratio of the undertone of the fundamental
electric pitch.
Scholium: A table of elector-chemical equivalents on the normal
basis will indicate the electrical conditions and amount of
chemical change.
Page 7
42
Page 8
43
is a rhythmical recurring translatory movement.
TRANSMISSIVE ENERGY:
is rhythmical motion of condensation and rarefaction produced by
the vibrating or oscillating body in the medium in which it is
immersed.
ATTRACTION:
is the mutual approach of aggregates caused by concentrated waves
of harmonic energy, tending to move in line of least resistance,
by becoming the centre of one series of concentric waves instead
of two or more series.
Page 9
HARMONY:
is the simultaneous vibration of two or more bodies whose
harmonics do not produce discords, and whose fundamental pitches
are harmonics of the lowest pitch, or are a unison with the
resultant notes or overtones, or undertones, of any two or more
of them.
AETHER:
is an atomolic liquid 986,000 times the density of steel.
ELECTRICITY:
is the oscillation of the atomoles of an atom.
INDUCTION:
is the transmissive force of the electric vibration in aether.
MAGNETISM:
is the mutual attraction of juxtaposed bodies vibrating at unison
or harmonic electric pitches.
GRAVITY:
44
is the mutual attraction of atomoles.
GRAVISM:
is the transmissive form through a medium of atomoles in the
fourth state, or a medium composed of atomolini.
ATOMOLINI:
are ultimate units of atomoles, and when in a liquid state are
the media for the transmission of gravism. The illimitable
divisibility and aggregation of matter is a logical sequence.
---------------------------------------------------------------------These 40 laws have been hidden away for over 85 years.
We believe the time is long past for the free sharing of such
information among all interested parties.
Please feel free to distribute any documents available from the
KeelyNet Bulletin Board System or through Vangard Sciences.
If you wish to contact us regarding any questions, comments or
other matters, you may write to or call :
VANGARD SCIENCES (214) 324-8741 Jerry
PO BOX 1031 (214) 484-3189 Ron
Mesquite, TX 75150 (214) 324-3501 KeelyNet
Your comments and support are appreciated!!
45
Andreas Hecht
John Searls Erfindung ist geradezu sensationell - sie liefert Energie und hat quasi als Nebenwirkung auch noch
antigravitative Eigenschaften. Nur hat scheinbar noch niemand ein Searlsches Gert im Betrieb gesehen...
Searls Biographie
Der Searl-Effekt
Der Searl Effekt Generator (SEG)
Die Levity Disc
The Law of the Squares
Kritische Stimmen
Quellenangaben
Searls Biographie
John Roy Robert Searl wurde am 2. Mai 1932 als Kind einer sehr armen Familie in Berkshire, England, geboren.
Als er 4 Jahre alt war, wurde er von seinen Eltern und Geschwistern getrennt und in einem Heim untergebracht.
Mit viereinhalb Jahren trumt er das erste Mal einen jener Trume, die er bis zu seinem 10. Lebensjahr immer
wieder trumen sollte. Sie traten immer paarweise auf: Einem Traum folgte nach 2 Wochen ein weiterer. Diese
Sequenz wiederholte sich zweimal im Jahr, ingesamt zwlfmal. Diese Trume, die er damals noch nicht deuten
konnte, werden auch zum Ansto fr seine sptere Entdeckung.
Nachdem er einen Teil seiner Kindheit in verschiedenen Heimen verbracht und die Schule abgeschlossen hatte,
begann er 1946 eine Lehre bei der British Rewind Electrical Repairs Ltd. in London. Sein Aufgabenbereich
umfate die Montage, Demontage und Reparatur von Elektromotoren. Im Rahmen seiner Ausbildung kam er
auch das erste Mal mit der Herstellung von Magneten und den Grundlagen der Elektrizittslehre in Berhrung.
Hier liegt der zweite Ansto fr seine Ideen, die spter zur Erfindung des Searl Effect Generators (SEG)
fhren sollten. Er begann zu experimentieren, als er auf den Gedanken kam, da die freien Elektronen in
rotierenden Metallkrpern sich aufgrund ihrer Massentrgheit zur Peripherie bewegen mten. In diesem Fall
sollte zwischen Zentrum und Rand ein Spannung entstehen. Er erzielte mit diesen Experimenten jedoch nur
minimale Erfolge und begann, magnetische Materialien zu verwenden, was eine wesentliche Verbesserung der
Resultate erbrachte. Sich seiner Trume erinnernd, begann er, sie in Materialkombinationen fr
Permanentmagneten umzusetzen. Damals machte er die Entdeckung, die spter als Searl-Effekt bezeichnet
wurde und die Grundlage fr den SEG bildete, dessen erstes Modell zu dieser Zeit entstand. Die Versuche
wurde von nun an zu seiner stndigen Freizeitbeschftigung, finanziell wurde er in den Jahren 1946-48 durch
einen Herrn George Haynes (in einigen Quellen [2] findet sich auch die Schreibweise Hines) dabei untersttzt,
dessen Sohn auch an den Experimenten teilnahm.
Obwohl er offensichtlich Interesse an seiner Ausbildung hatte, brach er wohl seine Elektrikerlehre ab, denn
seine Biographie nach [1] verzeichnet fr das gleiche Jahr (1946) eine Beschftigung als Chemieassistent bei
Cannings Pharmacy, ebenfalls in London.
Ein Jahr spter bekommt er auf Empfehlung dieser Firma eine Ausbildungsstelle als Pfleger auf der
Krankenstation im Shenley Hospital, wo er nach einem Monat ins Labor versetzt wird, um sich mit Histologie
und Bakteriologie zu beschftigen. Nach weiteren 2 Monaten wird ihm ein Stipendium fr ein sechsjhriges
Studium der Neurochirurgie in Cambridge angeboten. Laut [1] konnte Searl dieses Studium jedoch nicht
beginnen, da sich sein Vormund weigerte, die Vormundschaft fr die Zeit des Studiums an das Hospital
46
abzugeben.
Nachdem seine medizinische Karriere gescheitert schien, begann John Searl, der sich auch fr die Kinotechnik
interessierte, eine Ausbildung als Filmvorfhrer. Durch seinen Vorgesetzten kam er damals auch mit dem
Amateurfunk in Berhrung. Sein Vormund unterbrach jedoch auch diese berufliche Entwicklung und so zog
John Searl Ende der 40er Jahre in die Midlands, um sich ein eigenes Leben aufzubauen.
1950 wurde er zum Wehrdienst einberufen. Nach seiner Armeezeit war er als Elektroinstallateur beim
Midlands Electricity Board in Tipton ttig. Nach seiner Heirat im Jahr 1953 zog er nach Reading um und
arbeitete dort vorbergehend als Filmvorfhrer und ab 1954 bei Handley Page, wo er mit dem Bau von
elektronischen Steuersystemen fr Flugzeuge beschftigt war.
1963 wechselte er zur Firma Racals Ltd., spter dann zu Vanderviels Products in Maidenhead, wo er 1977
auch eine Fluglizenz erwarb.
Nebenbei arbeitete er weiter an seinem SEG und baute bis zum Ende der 70er Jahre ca. 40 Modelle. Ende der
60er und Anfang der 70er Jahre erscheinen in diversen englischen Tageszeitungen Berichte ber seine Arbeit.
Searl wohnte damals mit seiner Frau und 6 Kindern in 17 Stephen's Close, Mortimer, Berkshire, England.
Im Jahr 1981 bekommt John Searl rger und zwar mit dem rtlichen Energieversorgungsunternehmen. Er
hatte ber viele Jahre sein Haus mit der Energie aus seinem SEG versorgt und das Unternehmen bezichtigte ihn
nun der illegalen Anzapfung des Versorgungsnetzes. 1982 wurde er aufgrund mehrerer Anklagen verhaftet und
verbrachte nach der Verhandlung vor dem Gericht in Reading 10 Monate im Gefngnis. Zu dieser Zeit soll auch
sein Haus niedergebrannt worden sein, um seine Arbeit zu vernichten. Nach anderen Quellen hat Searls Frau
nach seiner Verhaftung in einer mehrtgigen Aktion seine gesamte Arbeit vernichtet. Dabei gingen auch
smtliche Unterlagen und Dokumente verloren. In [4] schreibt Anders Heerfordt jedoch, da er fr einen Brand
keine Zeugen finden konnte. Dafr erinnerten sich Nachbarn daran, da Searl versucht hatte, einen der
Hochspannungsmasten in der Nhe seines Hauses zu fllen und deshalb Schwierigkeiten mit dem E-Werk bekam.
1983 wurde John Searl pensioniert, kehrte in die Midlands zurck und widmete
sich von nun an verstrkt seinem SEG und besonders dessen antigravitativem
Effekt. Bereits das erste Modell zeigte nmlich damals ein seltsames Verhalten:
Nachdem es zusammengesetzt war, begann es von selbst zu rotieren, wobei sich
seine Geschwindigkeit immer weiter steigerte. Schlielich erhob es sich in die Luft
und raste gegen die Zimmerdecke! Whrend Searl noch berlegte, wie dies wohl
zustande kam, bohrte sich der SEG durch Zimmerdecke und Dach und
verschwand. Dasselbe passierte mit den nchsten 5 (nach anderen Quellen 9)
Modellen. Es gelang ihm spter, diese Erscheinung zu steuern und, auf diesem
Antigravitationseffekt basierend, einen Flugkrper zu bauen, der von ihm als
Inverse-G-Vehicle (IGV) bezeichnet wird.
1987 verffentlichte Gunnar Sandberg von der Schule fr Ingenieurs- und
Angewandte Wissenschaften der Universitt Sussex, England, einen Report unter
dem Titel "The Searl Effect Generator, Design and Manufacturing Procedure."
Dieser beschreibt ausfhrlich den SEG und die zur Herstellung notwendigen
Technologien.
Ein gewisser Luis Jarillo (der Name lautet nach [1] Luis Jarillo, nach [4] jedoch Louis Avilio) berredete ihn
1987, nach London zu kommen und seinen SEG kommerziell zu nutzen. Dieses Projekt trug zunchst den
Namen Searl National Space Research Consortium und durchlief eine lngere Planungsphase. Im Mrz 1995
wurde dann von John R. R. Searl und John A. Thomas Jr. das Direct International Science Consortium
(D.I.S.C.) mit dem Ziel gegrndet, Searls Erfindung weiterzuentwickeln und zu vermarkten. Diese Gesellschaft
mit Sitz in Grobritanien besitzt Auenstellen in Amerika, Australien, Neuseeland, Irland und Deutschland.
Seit 1989 hat John Searl auch mehrere Vortrge England, Dnemark, der Schweiz, den USA und Deutschland
gehalten. Die Vortrge in Deutschland fanden zwischen dem 29.06. und dem 02.07.1990 in Mnchen statt.
In einigen Dokumenten wird erwhnt, da John Searl den Titel eines Professors innehat, jedoch wird nirgends
erwhnt, wann und wo er diesen Titel erwarb.
47
Der Searl-Effekt
Der eigentliche Searl-Effekt beruht auf den besonderen Eigenschaften, die ein Permanentmagnet - laut Searl erhlt, wenn man whrend seiner Herstellung dem magnetisierenden Gleichfeld ein Wechselfeld berlagert.
In [5] werden folgende Parameter angegeben: IAC= 100 mA, f = 107 Hz. Zur Demonstration des SearlEffektes wird folgendes Experiment beschrieben:
Wird Magnet A langsam von einer ueren Kraft (rot dargestellt) zur Ecke 1 von Magnet C bewegt (1) und
dann um diese Ecke herum (2), beschleunigt er von einem bestimmten Punkt an selbstndig, bewegt sich um die
Ecke 2 und rollt auf der anderen Seite von Magnet C entlang (3) bis er einen Punkt erreicht hat, an dem sich
seine Bewegungsrichtung umkehrt (4). In dem Moment, in dem Magnet A um die Ecke 1 geschoben wird,
beginnt Magnet B spontan, sich auf die Ecke 3 zuzubewegen (2), um Ecke 3 und 4 herumzurollen und sich auf
der rechten Seite von Magnet C in Richtung der Ecke 1 zu bewegen (3). Auch er erreicht noch vorher einen
Punkt, an dem sich diese Bewegung umkehrt (4). Die Magneten A und B oszillieren (4), bis sie in einer neuen,
stabilen Position zur Ruhe kommen (5).
Der nchste Schritt bestand darin, statt des Stabmagneten C einen Ringmagneten zu verwenden. Der dabei
entstandene Aufbau ist die einfachste Form des Searl-Generators.
48
Ergebnisse und Dokumentation laut Searl 1983 vernichtet worden waren.
Der Searl-Effekt-Generator besteht im einfachsten Fall aus einem feststehenden Ring aus magnetischem
Material und mehreren Walzen, die ebenfalls magnetisch sind. Die Magnetisierungsrichtung ist bei allen Teilen
axial. Laut Searl beginnt die Anordnung nach dem Zusammenbau von selbst zu rotieren [3] und bentigt keine
zustzliche Energiezufuhr. Sie ist in der Lage, hohe Energiemengen abzugeben (mechanisch oder ber
Induktionsspulen elektrisch), generiert eine Hochspannung auf den Oberflchen ihrer Teile, zeigt antigravitative
Eigenschaften und diverse "Nebenwirkungen" wie Luftionisation und Vernderungen der Halbwertzeit von
radioaktiven Isotopen. Die Bezeichnungen "Searl Effect" und "Searl Effect Generator" wurden von Peter Barret,
einem Assistenten von John Searl, vorgeschlagen.
Das Material fr Ringe und Walzen mu bestimmte Anforderungen erfllen: Es handelt sich um ein Gemisch,
bestehend aus einer speziellen Kombination von Bestandteilen, die sich aus Searls "Law of the Squares" (wrtl.
bersetzt: Gesetz der Quadrate) ergibt und die er aus seinen Kindheitstrumen abgeleitet hat.
[6] erwhnt die Elemente Aluminium, Silizium, Schwefel, Titanium, Neodymium und Eisen, die bei einer 1984
von Roger Cheese an der Schule fr Ingenieurs- und Angewandte Wissenschaften der Universitt von Sussex
durchgefhrten Analyse festgestellt wurden. Analysiert wurde das Bruchstck eines von Searl 1946 hergestellten
Magneten, der aus einer Mischung zweier ferromagnetischer Pulver entstanden war, die Searl damals aus den
USA bezogen hatte. Diese Mischung wurde entweder in einer Hydraulikpresse unter Vakuum gepresst oder in
Bakelitformen gegeben, die anschlieend dem Vakuum ausgesetzt wurden, um die Massekonzentration zu
erhhen und die Luft aus der Mischung zu entfernen. Vom letzteren Verfahren ist bekannt, da der
anschlieende Abbindeproze bis zu drei Tage dauerte, was darauf schlieen lt, da flssige Bindemittel
verwendet wurden, die bei Raumtemperatur aushrteten. Weitere Einzelheiten ber das Formverfahren sind nicht
bekannt.
49
knnten. Genaueres ist darber nicht bekannt, da die entsprechenden Unterlagen bei dem Feuer 1983 vernichtet
wurden.
Zur mechanischen Anordnung der Teile wurde Searl
wahrscheinlich durch Wlzlager und deren Gyroskopund Trgheitseigenschaften bei hohen Drehzahlen
angeregt. Das Basiselement eines SEG wird als Gyro
Cell (GC, siehe Abb.) bezeichnet. Sie besteht aus einem
fest montierten einzelnen Ring (als "plate" bezeichnet)
und beweglichen Walzen ("runners"), die durch die
magnetische Anziehung auf der Auenflche des
Ringes haften. Die Ausgangsleistung erhht sich mit
der Anzahl der Walzen. Die mechanischen
Abmessungen mssen gewhrleisten, da der
Auendurchmesser des Ringes gleich dem
ganzzahligen Vielfachen des Durchmessers einer Walze
ist. Weiterhin mu fr ein sauberes Funktionieren die
Anzahl der Walzen grer als 12 sein (8 nach anderen
Quellen). [6] fhrt dazu folgende Formel an:
Dp
------ = N > 12
Dr
Durch Experimente hat Searl festgestellt, da der Abstand a zwischen den Walzen mglichst dem Durchmesser
Dr einer Walze entsprechen sollte. Aus mechanischen Grnden sollte die Hhe l der Walzen geringer als die
Hhe h des Ringes sein.
Im Betrieb rotiert jede Walze um sich selbst und umkreist dabei den Ring. Aufgrund der Abmessungen fhrt
dabei jede Walze ein komplette Anzahl von Umdrehungen aus, whrend sie den Ring einmal umrundet. Dabei
entsteht durch elektromagnetische Wechselwirkung und Zentrifugalkraft ein Spalt s zwischen Ring und Walzen,
soda eine Reibung zwischen Walzen und Ring praktisch nicht mehr vorhanden ist und die Teile galvanisch
getrennt sind.
Zur Gewinnung elektrischer Energie dienen Induktionsspulen mit offenem
Weicheisenkern (C-Form), die zur Spannungserzeugung am SEG angebracht
werden. Die Art und Weise der Anbringung ist aus der nebenstehenden
Abbildung ersichtlich. Mit diesem Aufbau will Searl in Einzelfllen bis zu 30
kVA [3] erreicht haben, [6] erwhnt allerdings nur ca. 100 W fr die Bauform
mit einem Ring.
Auerdem entsteht am SEG selbst whrend des Betriebes eine Hochspannung auf den Oberflchen der
Walzen und Ringe. Dabei zeigen die Walzen eine negative, die Ringe eine positive Ladung.
Es knnen auch mehrere Gyro Cells ineinander
verschachtelt werden, um die Leistung zu erhhen. Damit
entsteht die bekannte Form des Searl-Effekt-Generators,
wie sie in der nebenstehenden Abbildung zu sehen ist.[5]
erwhnt, da diese Form nicht selbst anluft, sondern mit
einem Motor gestartet werden mu.
50
Der vom SEG gelieferte Elektronenflu wurde ber Schalter auf Emissionsplatten geleitet, die an der Ober- und
Unterseite der Auenhlle der "levity disc" angebracht waren. Damit war eine Steuerung nach dem
Rckstoprinzip mglich, die sehr flexibel war, da es mehrere dieser Platten auf Ober- und Unterseite gab, die
einzeln schaltbar waren.
Die ebenfalls aufgeladenen Nadeln haben die Aufgabe, die Luft von der Scheibe wegzudrcken und so eine
Art Schutzmantel zu bilden.
Um ein Bild von den Grenverhltnissen zu bekommen, hier ein paar Daten, die [7] fr ein Modell namens P11
anfhrt:
Gesamtmasse 5t
Spannung vom SEG: 937,5 Millionen V(!)
51
beruhen. Der nachfolgende Abschnitt beruht hauptschlich auf den Informationen aus [7].
Wie in der Kurzbiographie schon erwhnt, waren die regelmig wiederkehrenden Trume aus Searls
Kindertagen der Anla fr ihn, ber eine eventuelle Bedeutung nachzudenken. Das Ergebnis war das Gesetz der
Quadrate (Law of the squares). Wie Searl diese Schlufolgerungen gezogen hat, wird wohl sein Geheimnis
bleiben, sagt er doch selbst, da dazu eine von der Alltagslogik vllig verschiedene Denkweise ('a totally
different thinking') notwendig war.
Was ist nun dieses "Law of the Squares" eigentlich genau?
Das Grundpostulat Searls geht von der Existenz von insgesamt 4 Krften aus:
Zwei horizontal und zwei vertikal gerichtete, wobei jeweils die zwei gleich
gerichteten unterschiedliche Betrge haben. Zwei mgliche geometrische
Darstellungen sind links im Bild zu sehen. Von diesem Postulat ausgehend gelangte
Searl auf fr mich (und die Autoren von [7]) nicht nachvollziehbare Weise zu seinem
"Law of the Squares".
Dabei handelt es sich um ein System, das auf magischen Quadraten aufbaut, die von Searl nach bestimmten
Kriterien in verschiedene Kategorien eingeteilt werden.
Da wre zum einen die Einteilung nach der Anfangszahl (der kleinsten Zahl im magischen Quadrat), die als
Level bezeichnet wird. Der Level ergibt sich aus der Anfangszahl + 1. Weiterhin unterscheidet Searl "in sich
rotierende" und "in sich oszillierende" Quadrate. Diese Eigenschaft richtet sich nach der Verteilung der Zahlen
im Quadrat: Wird eine diagonale Grundreihung der Zahlen eingehalten, handelt es sich um ein "in sich
rotierendes Quadrat".
Werden, von der normalen Zahlenreihe ausgehend, die
Zahlen zur Bildung des magischen Quadrates auf Diagonalen
innerhalb des Quadrates vertauscht (siehe Bild), spricht Searl
von einem "in sich oszillierenden" Quadrat. Eine weitere
Einteilung basiert auf der Seitenlnge der Quadrate: Die
Gruppe 1 bilden die Quadrate mit ungerader Seitenlnge
(3,5,7,9...). Alle Mitglieder dieser Gruppe sind "in sich
rotierende" Quadrate und stehen im System Searls fr
Rotationsbewegungen und Kreisprozesse. Die Elemente der Gruppe 2 haben Seitenlngen von 4,8,12,16 usw.,
sind alle "in sich oszillierende" Quadrate und verbunden mit statischen Strukturen und Gleichgewichtszustnden.
Die letzte und komplizierteste Gruppe ist die dritte: Sie entht Quadrate mit Seitenlngen von 6,10,14,18... Die
Quadrate dieser Gruppe sind Kombinationen aus einem Kreuz "in sich rotierender" und Ecken "in sich
oszillierender" kleinerer Quadrate. Ihre Entsprechung finden diese Gebilde in lebenden Systemen, z.B. unterliegt
laut Searl der Mensch den Gesetzen eines Quadratsystems von 46x46 (Chromosomenzahl!).
Wo ist nun aber der Zusammenhang mit dem SEG?
Searl behauptet, da Systeme, die dem "Law of the Squares" folgen, sich Eigenheiten zunutze machen knnen,
die er im Zusammenhang mit den Quadratsystemen entdeckt hat. Genauer: Die potentielle Energie eines Systems
mu sich nicht umgekehrt proportional zu seiner kinetischen Energie verhalten, sondern dieses Verhltnis kann
sich sogar umkehren und zur Selbstbeschleunigung fhren, wenn man bei der Konstruktion dieses Systems Searls
Quadratgesetz beachtet. Beim SEG spielt dieses Gesetz eine Rolle bei der Zusammensetzung und Gre der
Magneten und bei der Wahl der Frequenz des zu berlagernden Wechselfeldes bei der Magnetisierung. Ein (nicht
ganz plausibles) Beispiel findet sich in [7]. Searl behauptet, da der SEG unmglich zum Funktionieren gebracht
werden kann, wenn man sich nicht genau an sein "Law of the Squares" hlt.
Kritische Stimmen
So ntzlich und vielversprechend eine Erfindung wie der SEG ist, es gibt einige Punkte, die zumindest Skepsis
hervorrufen.
Der erste und wichtigste Punkt: Viele Forscher haben versucht, wenigstens einen Augenzeugen aufzutreiben,
52
der einen SEG oder gar die "Levity Disc" in Aktion gesehen hat. Gelungen ist dies jedoch bisher niemandem.
Und das, obwohl Searl weit ber 40 SEG's gebaut haben soll! Hingegen fanden sich einige, die an Searls
angekndigten Vorfhrungen teilnehmen wollten, dafr auch Eintritt bezahlt hatten, nur um dann von Searl
enttuscht zu werden, der sich mit Wetterproblemen oder hnlichem herausredete.
Der Privatforscher Anders Heerfordt hat einige Jahre lang versucht, Mitarbeiter von Searl oder andere
Personen aufzutreiben, die Searls Erfolge besttigen konnten - vergeblich.
Ehemalige Mitarbeiter distanzierten sich von Searl, weil sie sich betrogen fhlten oder jedenfalls nie einen
funktionierenden SEG zu Gesicht bekommen hatten, andere von Searl bezeichnete Personen waren nicht
aufzutreiben oder konnten sich an nichts erinnern, was Searls Arbeiten besttigt htte.
Ein weiterer Punkt ist das Abhandenkommen der Unterlagen und Modelle Searls im Jahr 1983. Wie schon
weiter oben bemerkt, fand Heerfordt keine Zeugen fr den von Searl behaupteten Brand. Aber selbst, wenn diese
Geschichte wirklich stimmt, sollte bis heute eigentlich lngst wieder mindestens ein funktionstchtiges Modell
entstanden sein, jedenfalls, wenn man bedenkt, da zwischen 1952 und dem Ende der 70er Jahre 40 Modelle
gebaut worden sein sollen.
Was mir ebenfalls auffiel, war, da Searl sein erstes Modell im Alter von 14 bis 16 Jahren gebaut haben soll.
Nun findet sich zwar nirgends ein konkreter Hinweis, wann das "Law of the Squares" entstand, aber es scheint
mir wenig wahrscheinlich, da Searl es damals schon ausgearbeitet hatte und anwenden konnte. In diesem Fall
sollte der SEG aber "auf keinen Fall funktionieren"! Auch das analysierte Magnetmaterial weist eine andere
Zusammensetzung auf als die aus dem Gesetz geschlufolgerte in [7], ganz zu schweigen von der ermittelten
Frequenz fr das zur Magnetisierung benutzte Wechselfeld . Ist das "Law of the Square" vielleicht eine
Mystifizierung (ob nun zum Schutz der Searlschen Technologie vor Nachahmern oder aus anderen Grnden)?
Oder lt es sich gut in Buchform verkaufen, weil es zum Verstndnis des SEG "unbedingt notwendig" ist?
Immerhin sind die Bcher von Searl mit 40 bis 50 engl. Pfund pro Band bei insgesamt 10 Bnden nicht gerade
billig...
Es gibt noch einige andere Punkte, die Searl nicht gerade im besten Licht erscheinen lassen, z.B. sein
Verhalten Leuten gegenber, die versucht haben, Beweise fr die Funktion des SEG zu finden. Insbesondere
betrifft dies Anders Heerfordt oder Gunnar Sandberg. Auch die Geschichte mit dem Elektrizittsmast, den Searl
zu fllen versucht haben soll, lt, falls sie stimmt, Searl nicht unbedingt seris erscheinen. Und daran ndert
auch die Tatsache nichts, da er heute Prsident des internationalen Unternehmens D.I.S.C. Ltd. (seit 1999
SISRC Ltd.) ist.
Quellenangaben
1. Prof.John Searl - his life, work and research.
http://www.moose.co.uk/userfiles/prof.j.searl/johns.htm, (nicht mehr verfgbar)
2. Heinzerling, Jrgen: Energie aus dem Nichts: Macht, Magie und Wissenschaft.
1. Aufl., Bettendorf'sche Verlagsanstalt 1996, ISBN 3-88498-098-X
3. Sandberg, S. Gunnar: Was ist dran am Searl-Effekt?
deutsche bersetzung des Reports "The Searl Effect and The Searl Effect Generator.",
17.06.1987 im Auftrag der D.I.S.C. Ltd., in: "raum&zeit", Ausg. 39, 1989, S.67 ff.
4. Heerfordt, Anders: John Searl and his flying disks. A personal commentary by Anders Heerfordt.
SEARLE1.ASC, April 7, 1991, file from KeelyNet BBS (214) 324-3501
SEARLE2.ASC, June 23, 1991, file from KeelyNet BBS (214) 324-3501
5. Sandberg, S. Gunnar: The Searl Effect.
School of Engineering & Applied Sciences, University of Sussex, October 11, 1982
6. Sandberg, S. Gunnar: The Searl Effect and The Searl Effect Generator. Design and
Manufacturing Procedure.
Report No. SEG-002, School of Engineering & Applied Sciences, University of Sussex, June 1985
Schneider, Herbert und Watt, Henry: Dem Searl-Effekt auf der Spur.
Teil I in "raum&zeit", Ausg. 42, 1989, S. 75ff
Teil II in "raum&zeit", Ausg. 43, 1989, S. 73ff
53
Technical Specifications:
Coil Inductance = 220 Henries
Coil resistance = 17,332 ohms
Copper used = 20,440 m of AWG 34 (16/100)
54
Weight of copper : 3,650 gr
Magnets : 8 NIB (Bremag 27MGoe) (2x4 magnets stacked)
Pulsed coil voltages : about 300 Volts DC ( with BackEMF spikes up to 1500 Volts..)
Speed = 230 RPM
Commutator type : Mechanical (brushes)
Email : JNaudin509@aol.com
55
The main commutator wheel is made with an insulating material like Bakelite, Epoxy, Teflon, Ertalon..
The rotating contacts are made with copper or silver sheet and have rectangular shape glued on the
wheel.
These rotating contacts are at 180 degrees and one on each side of the wheel, thus, when the brushes
56
touch these contacts, the circuit will close. The polarity of the current is reversed in the coil for each half
turn.
Each pair of brushes are made with a copper or silver sheet and must be separated by at least 10mm to
prevent eventual sparks.
If you want to use the Newman's motor with a 12V DC Battery, you need only to connect the 12V DC
power supply (below) instead of the 220/220V insulator transformer from the main power supply (above).
57
Email : JNaudin509@aol.com
58
The Newman's Energy Machine V1.0 from JL Naudin, Blueprints and pictures
The Newman's Energy Machine: Original tests setup and scope pictures
Back current flow measurement with various setups of scope grounding (12-0198)
59
The entropy changes while the Machine runs, a COOLING effect has
been observed...(07-09-98)
60
Link to the "Newman's Energy Machine" web site , from Stefan Hartman
Email : JNaudin509@aol.com
61
Fonte: http://vaerokids.tripod.com/free/m1.html
INVENTORS BEWARE!
In 1978 Mr. Adams discovered that inventors of machines or devices of high energy efficiency capability ("Free"
Energy) are not only refused patents, but that in most cases, their inventions are classified under the "Military
Use Clause", which is, of course, international. Inventors are prohibited from publishing details of their devices
or promoting them in any manner if their invention is classified under this clause. In other words, their devices
automatically become the sole property of the "establishment".
The fact that there is an established mechanism to suppress energy inventions of this nature has been a closely
guarded secret for many years. Many inventors have made such claims, but the general public rentain oblivious
to the fact that they are being deprived of clean and free energy by organisations that would rather make money
and hold power over We public, than allow such technology to become widely available. Yet another example of
the abuse of power. (No pun intended.)
See conspiracy - Article by Robert Adams
"FREE" ENERGY
This motor generator would be called a "Free Energy" machine by most individuals. It is, in fact, a device that
converts the perpetual motion of sub-atomic particles, known in physics terminology as "particle spin", into
conventional electric power. It is a widely accepted fact of physical law that sub-atomic particles are in a state of
perpetual motion. Anybody who tells you that there is no such thing as perpetual motion is either ignorant or a
liar, As Robert Adams states, "Our universe is a sea of energy - free, clean energy. "It is all out there waiting for
us to set sail upon it" Adams has built a number of permanent magnet electric D.C. motor generators based on
the principle outlined in this article, some of which have demonstrated an electrical efficiency of 690% and a
mechanical efficiency of 620%. The devices run at room temperature. Any device that doesn't could not be
62
running at over 100% efficiency, as heat is the major result of hysteresis losses that are induced in any
conventional electric motor or generator. Radiated heat is a sure-fire sign that a power generator is not running
over unity, as all heat radiated by such a device is wasted energy. I will remind readers once again at this point
that Mr Adams is not a fly-by- night, propeller-head, whacko, techno-boffin. He is an electrical engineer with
over 60 years experience in the field of electrical engineering, which has included designing and building
equipment for use in power stations, broadcasting facilities, airport communications centres, etc. He is a former
Chairman of the Institute of Electrical & Electronics Engineers, Inc., U.S.A., (N.Z. Section), and his resume
includes personal referees ranging from a former New Zealand Commissioner of Police, a former Chairman of
Air New Zealand, (and several technical specialists from the airline), as well as an Ex- NASA scientist. Nexus
would recommend to anybody interested in, or presently building a device of this nature, to try building a device
based on Mr. Adams plans. His machines have demonstrated the ability to generate free energy, unlike most of
the theoretical models that are promoted as over-unity devices.
GENERAL DESCRIPTION
The invention may be broadly said to be, an electric motor and/or generator comprising a rotor consisting of a
number of radially arrayed permanently magnetised poles, and a stator consisting of a number of radially arrayed
permanently magnetised poles, together with a number of wound poles. The rotor's permanently magnetised
poles use ferite magnetic cores, and may comprise any even number of poles. The stator's wound poles employ
steel or iron cores. The device is essentially a D.C. machine, but may be fed A.C. input with the use of a solid
state convertor.
The Rotor uses a number of similar polarity permanent magnetic poles, i.e., all-South or all-North. A further set
of wound poles are radially arrayed in the stator, and are arranged in such a manner as to be fed energy, that is
excited by back E.M.F. energy, from the poles of the rotor.
Associated circuitry is provided to feed the energy back to the drive poles of the motor.
The resulting characteristics of this design is that once the rotor is moved from the position of equilibrium, each
pole is attracted to, or repulsed by the stator poles, but at a precise geometrical point with respect to them, the
input current to the drive coils ceases. As a result, the collapsing field current is in the opposite direction to the
applied force, thus reversing the magnetic polarity of the stator coils. This forces the rotor poles away (reaction),
which is the instantaneous response of a system to an applied force, and is manifested as the exertion of a force
equal in magnitude, but opposite in direction to the applied force.
Pulsing the D.C. input current, overcomes losses generated in conventional motors. According to classical
electrical engineering theory, efficiency is greater the more nearly equal the Back E.M.F. (electromotive force) is
to the applied voltage, i.e. the lower the input current. Figure 6 shows that there is minimum 100% back E.M.F.
relative to the supply source of input D.C. voltage (according to classical electrical theory), which virtually
depicts a sine wave due to the effect of the collapsing field.
This effect also overcomes the electrodynamic torque problems associated with conventional motor designs. (As
input power varies with the duty cycle pulse; i.e. the lower the input current, the lower the input current, and the
lower the speed, the greater the torque.) At clipoff, the badk-EMF ceases, the collapsing field takes over,
opposing the outgoing rotor magnet and thus increasing momentum. With this design force is applied twice
during each D.C, pulse, with pulse-on, and with pulse-off.
The timing of the pulses are determined by the dimensions of the motor itself, i.e. the speed of rotation of the
motor's central axle, the position of the rotor magnets in relation to the stator windings, as well as the distance
that the rotor magnets travel when passing across the poles of the stator winding.
63
Fig. 1 to Fig. 4: How to calculate the D.C. pulse timing of the stator coils on the Permament Magnet
Electric D.C. Motor Generator.
Fig. 1
Fig. 2
64
Fig. 3
Fig. 4
65
Fig. 5: Outline showing how double force pulse is produced by a single switched D.C. pulse.
Fig. 6: Graph showing oscilloscope trace of characteristic voltage across stator windings.
66
67
After a few changes, corrections and/or general modifications you will be ready to put a mechanical and/or
electrical load on the machine. For an electrical load it is suggested you firstly wire up a bank of 6 - 12 LEDs. If
everything is go, then switch over to torch lamps: Later on with a bigger machine - car lamps, or maybe
household lamps and a mechanical load simultaneously.
For Efficiency Testing
Milliamp meters are useless for this machine - do not use for testing. Use only high quality digital true RMS
meters, with input power, for high accuracy, use only a high quality electronic wattmeter: These instruments
measure extremely accurately any wave-shape. A good twin-beam oscilloscope is a must: So too a high quality
electronic temperature-measuring instrument with appropriate probe.
Drill dead centre of one or both cores, as per drawing. Probe be must be good fit. If, after one hour of running
on load and temperatare is around 40 degrees, that will indicate things are most likely working correctly.
Don't forget your ambient in Australia will be considerably higher than ours. Read the inventor's rotary and solid
state efficiency measurarnent data sheet.
Rotor-stator air gap is not critical, but the closer the better.
As stated elsewhere, the stator pole faces, if desired, may be reduced to 25% of the rotor pole face area, hence
large drive windings and high drive current is not required.
With care to detail, correct mathematical calculations and high quality instrumentation correctly utilised,
incredible results can be expected. Study data submitted shows those results have been attained on several
machines.
Temperature of conventional machines internally reach boiling point after fifteen minutes running. Check the
Adams Mctor Generator after running on full load for 48 hours, or after fifteen minutes if you prefer not to wait
that long. You will be very pleasantly surprised - I refer to maximum loading conditions, not free running.
Mechanical Loading Test:
A high quality strain measuring instrument must be used in the universal "pony brake' method of mechanical load
testing.
RPM tests must also be obtained with a high quality tachometer and/or oscilloscope reading and use the
universal equation to calculate mechanical machine efficiency.
Note: Very Important Factor:
As you increase duty cycle, current input will increase and efficiency will decrease. From random test sheet
results I have chosen it is very clear what to expect upon increasing duty cycle.
Note:
The Adams Motor Generator is so efficient, so simple and consequently it's construction is such that it surpasses
overwhelmingly anything before it, thus lending itself admirably to mass production.
One of a number of unique features of the Adams Machine is the fact that the same rotor poles are utilised
simultaneously for driving the machine and generating output energy.
68
Construction Equation - Adams Motor Generator - 20/12/76
It was found, after considerable development work, that maximum electro- magnetic effect produced in the
stalloy stacked generating pole windings occurred when the dimension of the mating end of the stacks were four
times greater in area than the rotor magnet's pole area. Hence the overall design of the machine incorporates this
derived ratio of one to four. (The Adams Equation, as applies only to the Adams Machine).
Feedback - 20/12/1976
The feedback, produced by the output generating coil, produces a polarity reversal normally resulting in large
eddy current losses in conventional machines, but, in the Adams Machine, it is hamessed to develop further
additional torque to the magnetic rotor. The larger the output generating coils the greater the torque delivered to
the rotor.
Power Factor- 1/7/1976
There is no power factor loss because the Adams Machine runs in a condition of resonance. Therefore, the
Power Factor Loss is zero.
Source: Nexus magazine, December-January 1993