Professional Documents
Culture Documents
Product Description
Cut energy waste Flow switch activates heater only when water is
running, no standby heat loss
Local Codes Please check all applicable codes, national and local to
ensure compliance both on the plumbing and electrical installation
Product Description
For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
Watt Density Classification: HWD, Input Voltage (V): 240, Wattage at 240V (W): 5500, Watt
Density at 240V (W/sq. in. ): 202
Outer Sheath Material: Copper (with Plating), Resistored: No, Configuration: Fold back,
Element Diameter (in.): .260
Element Length Flange to Tip (in.): 9.60, Actual Thread Size Outside Diameter (in.): 1-9/32,
Nominal Thread Size (in.): 1
Threads per Inch: 11-1/2, Thread Type Series Designation: NPSM, Hex Head Size Across Flats
(in.): 1-1/2