Professional Documents
Culture Documents
Splitting the Ports on ASIC you can split the above ports in to Fiber and reserve
below Ethernet.
From Management and Control Plan one FI will be active and other will be
standby,and by Data transfer Plan (Fiber channel and Ethernet)both will
be in forwarding mode
Generic Expansion Module they have there own sub operating system
powersupplies, we can reboot GEM without Rebooting FI.
Wiring
VIC Card CNA it can Converges Fiber Channel in to Ethernet Protocol, VIC card is
known as Virtual card because it has not its real physical ports it is itself FEX,
2 Processor Slot