Professional Documents
Culture Documents
UT
UT
PAGE 1 OF
CLIENT/CONTRACTOR : :
PROJECT/ VESSEL
Our Ref No.
Location of Test.
Surface Scanning
Items Tested
:
:
: 1F1S -1F2S - 2F3S - 2F4S / TA -TB -TC
:
RFI No.
Report No.
Tested Date
:
:
PWHT
Location
Exam Stage
Material grade :
Surface Preparation :
Probe Type
Size
GE / GB
10 mm
4 MHz
: Serial No.
GE/ GB
8 x 9 mm
4 MHz
45, 60, 70
Calibration Block :
Frequency
Sensitivity: It was set to 75% F.S.H. to obtain the D.A.C. curve from side drilled holes in reference block plus transfer
correction (if any) plus 6dB for scanning.
Angle
Couplant : Metylan
Range:
0-200
Technique: Contact pulse echo was adopted and the welds/ areas of test were scanned from all accessible surfaces. Normal/ TR probe was used to
detect for possible laminations and angle probes were used to defect for possible welds discontinuities.
Reference Standard : DNV OS C401 (STRUCTURAL)
Test Procedure : DNV GL- UT-001
Acc. Criteria
: BS EN ISO 11666
DAC sensitivity
Testing Personnel
Drawing Title
Drawing No
Acc. Level
: L2
Evaluation Level :
: 70 - -- dB, 60 - -- dB, 45 - -- dB
Recoding Level : AL
Transfer correction : 70 - -- dB, 60 - -- dB, 45 - -- dB
Certification
: PCN/NDT Level II
Joint No
Total
Length
(mm)
Tested
Length
(mm)
Plate
Thk
(mm)
Welder No.
Welding
Process
Defect
Length (mm)
Defect
Depth
(mm)
Probe used
Results
()
Remarks
TESTING PERSONNEL
NDT/PCN LEVEL II
REVIEWED BY COMPANY
LEVEL III
JSPL
QA/QC
OWNER
REPRESENTATIVE
CLASS
SURVEYOR
TESTING PERSONNEL
NDT/PCN LEVEL II
REVIEWED BY COMPANY
LEVEL III
JSPL
QA/QC
OWNER
REPRESENTATIVE
CLASS
SURVEYOR