Professional Documents
Culture Documents
Mikrotik SXT 5nD r2 Setup in Bridge Mode
Mikrotik SXT 5nD r2 Setup in Bridge Mode
You can connect with routerboard by WinBox through IP and MAC address. You need to download
WinBox from mikrotik website.
If you want to connect with device through IP then don't forget to add same network address into
your pc NIC, otherwise connection isn't established. Else you can connect through MAC so choose
MAC address from Elipsis next to "connect" field.
When you login, "RouterOS Default configuration" screen is popup. click okay.
Steps to followed
Right click "wlan1" interface and click Enable from dorpdown menu or just Blue
Check button on top of menu bar. Now you can see the interface is enabled.
Select all 4 HT chain options and also select all HT AMPDU priorities
On Nstreme tab select "Disable CSMA" and Framer policy "dynamic size"
Client Configuration
Step to follow for client
The AP must show up, if it isn't, follow above steps again, if its does, then click on the
SSID shown in the list and click the "connect" button then 'close'
After doing so you have connect client to AP. Wait we need change something more here .
On the wireless tables window you can see "R" next to the Wlan Interface. This indicate the cleint is
register and connected to the AP.
Click the Tools button on the left then choose Bandwidth Test
Change the "Test To:" field to the address of the client - 192.168.88.1
Click the "user" field and enter admin for the username.