Professional Documents
Culture Documents
0.3
C @ 0m
66 KN/m2
C @ Xm
105 KN/m2
Pile Dia
0.45 m
2.5
Nc
Pile @ Xm Length
10 m
Qs
120.8728
Qb
60.1183
Qa
180.9911 KN
Pile Capacity
Qa
C As
s
Cu Nc Ab
b
where
= adhesion factor. For bored piles use 0.3 for heavily fissured clay and 0.45 for firm
to stiff clay. For driven piles use Nordlands adhesion factors
c = average undrained shear strength over the length of the pile
As = surface area of the pile ( d l, where d = diameter of pile and l = length of pile)
s = factor of safety on the shaft (use 3.0)
cu = undisturbed shear strength at the base of the pile
Nc = Meyerhofs bearing capacity factor (use 9.0)
Ab = area of the pile base ( r2)
Qa
C As
s
Cu Nc Ab
b
where
= adhesion factor. For bored piles use 0.3 for heavily fissured clay and 0.45 for firm
to stiff clay. For driven piles use Nordlands adhesion factors
c = average undrained shear strength over the length of the pile
As = surface area of the pile ( d l, where d = diameter of pile and l = length of pile)
s = factor of safety on the shaft (use 3.0)
cu = undisturbed shear strength at the base of the pile
Nc = Meyerhofs bearing capacity factor (use 9.0)
Ab = area of the pile base ( r2)
b = factor of safety on the base (use 2.5)
Pile Radius
0.225