The document outlines a shutdown programme for UNIR-3 turbine with fast cooling down. Over a period of 2.5 hours from 16:00 to 22:30 hrs, the load was reduced in stages from 450 MW to 110 MW. Corresponding reductions were made to the temperature, main steam pressure, number of operating mills and oil supports. Key parameters like TSC margin and turbovisory parameters were continuously monitored. The final stage involved desynchronizing the machine and conducting an actual overspeed test from 22:30-23:00 hrs.
The document outlines a shutdown programme for UNIR-3 turbine with fast cooling down. Over a period of 2.5 hours from 16:00 to 22:30 hrs, the load was reduced in stages from 450 MW to 110 MW. Corresponding reductions were made to the temperature, main steam pressure, number of operating mills and oil supports. Key parameters like TSC margin and turbovisory parameters were continuously monitored. The final stage involved desynchronizing the machine and conducting an actual overspeed test from 22:30-23:00 hrs.
The document outlines a shutdown programme for UNIR-3 turbine with fast cooling down. Over a period of 2.5 hours from 16:00 to 22:30 hrs, the load was reduced in stages from 450 MW to 110 MW. Corresponding reductions were made to the temperature, main steam pressure, number of operating mills and oil supports. Key parameters like TSC margin and turbovisory parameters were continuously monitored. The final stage involved desynchronizing the machine and conducting an actual overspeed test from 22:30-23:00 hrs.
WITH FAST COOLING DOWN OF TURBINE Date : 9/11/2005 Sl No 1.
2.
3.
4.
5.
Time
16:00 - 18:00 hrs
18:00 - 19:00 hrs
19:00 - 20:00 hrs
20:00 - 21:00 hrs
2100 - 22:00 hrs
6.
2200 - 22:30 hrs
7.
22:30- 23:00 hrs
Activities
Load reduction to 450 MW
Temp Reduction to 500 0 C . MS Pressure 155 ksc No of Mills 6 Mills ( Preferably) Load reduction to 400 MW Temp Reduction to 490. 0 C . MS Pressure 150 ksc No of Mills 6 Mills ( Preferably) Load reduction to 350 MW Temp Reduction to 480. 0 C . MS Pressure 140 ksc No of Mills 5 Mills ( Preferably) MDBFP in service & one TDBFP to be put on barring gear Load reduction to 250 MW Temp Reduction to 470. 0 C . MS Pressure 130 ksc No of Mills 4Mills ( Preferably) One Elevation Oil Support Load reduction to 200 MW Temp Reduction to 450 0 C . MS Pressure 120 ksc No of Mills 3Mills ( Preferably) Two elevation Oil Support TDBFP to be taken out & only MDBFP in service Load reduction to 160 MW Temp Reduction to 450 0 C . MS Pressure 100 ksc No of Mills 2 Mills ( Preferably) Two Elevation Oil Support Load reduction to 110 MW Temp Reduction to 450 0 C . MS Pressure 80 ksc No of Mills 2Mills ( Preferably) Two Elevation Oil Support Desynchronisation of the Machine & carrying out Actual
Monitoring the TSC
margin & Turbovisory parameters Monitoring the TSC margin & Turbovisory parameters Monitoring the TSC margin & Turbovisory parameters
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines