Professional Documents
Culture Documents
z 2 z1
(2)
(1)
p 2 p1 V22 V12
2g
The diagram shows that the elevation difference, z2 z1 = 8 in = 0.6667 ft. We can apply the
continuity equation between points (1) and (2) where we assume that the JP4 density does not
change. This gives
V1 A1 V2 A2
D 2
D22
V1 1 V2
4
4
D
D2
V1 V2 22 V2 2 ,
D1
D1
Since the diameter at point 2 is the same as the inlet diameter where V = 15 m/s, the continuity
equation tells us that V2 = 15 ft/s as well. Thus we can find the value of V1 from the diametersquared ratio.
D
V1 V2 2
D1
15 ft 6 in
s 4 in
33.75 ft
,
s
The measurement tube at point 2 is measuring the static pressure. With the usual use of gage
pressures so that the pressure at the top of this tube is zero, the value of p 2 is found from the
fluid-static equation p2 = h2 = (6 ft), where is the specific weight of the JP4. We can substitute
this expression for p2 into our Bernoulli equation along with the values found above: z 2 z1 =
0.6667 ft, V1 = 33.75 ft/s, and V2 = 15 ft/s. This gives the Bernoulli equation as
z 2 z1
p 2 p1 V22 V12
6 ft p1
0.6667 ft
2g
15 ft
33.75 ft
32.174 ft
2
s
Calculating the velocity term and rearranging the numerical equation gives.
Jacaranda (Engineering) 3333
E-mail: lcaretto@csun.edu
Mail Code
8348
Phone: 818.677.6448
Fax: 818.677.7062
0.6667 ft 6 ft
p1
14.205 ft 0
p1
7.538 ft
The manometer at the Venturi throat is open to the atmosphere so the pressure on the open arm
is zero. Since the bottom of the displacement h is at the same level as the open arm of the
manometer the pressure at this level on the left side of the manometer is zero. This must be less
than the pressure at point 1, p1, by the specific weight, , times the height, h, that we are trying to
find. This gives the manometer equation as follows.
p1 h 0 h
p1
7.538 ft
We see that the manometer height is p1/ which is the same quantity whose numerical value we
found as 7.538 ft from Bernoullis equation. This gives us our answer for the manometer height:
h = 7.538 ft
What would your answer be if the fluid were water?
The above analysis shows that the specific gravity does not play a role in the solution so the
answer would be the same, h = 7.538 ft, if the fluid were water.
Mail Code
8348
Phone: 818.677.6448
Fax: 818.677.7062