Connect water supply to Doll House lavatory. Run female end of hose labeled "Doll House" through Utility Box One. Go inside Doll House and check to make sure faucet handles are closed.
Connect water supply to Doll House lavatory. Run female end of hose labeled "Doll House" through Utility Box One. Go inside Doll House and check to make sure faucet handles are closed.
Connect water supply to Doll House lavatory. Run female end of hose labeled "Doll House" through Utility Box One. Go inside Doll House and check to make sure faucet handles are closed.
hose being fed through the PVC going to Utility Box One at the BH. Take the green hose labeled Doll House and run female end through PVC and into Utility Box One.
Utility Box One: Connect female end of Doll House
hose (that you just ran through PVC) to the (left) end of ball valve. You may need to remove a perforated end cap (put in baggie with others in BH behind pump). Tighten with wrench or pliers. Go back to male end and walk it up to Doll House by the composting bin. Look for the connection that will run water up to the lavatory sink. Make connection and then go back and turn red ball valve handle 90 degrees to left to open. Go inside Doll House and check to see that faucet handles are closed. Test to make sure you have water and.now you should be done!