Professional Documents
Culture Documents
CUTTING EDGE:
Unit weight of steel=7850kg/m3
Inner perimeter=3.14x5.65
=17.74m
Angle section according to IS:800 chosen in case of the
cutting edge
130x130x10
Now from steel table the weight for this angle
section=19.9kg/m
Total weight along the inner
perimeter=17.74x19.9=353.0459kgs
External perimeter=5.665x3.14=518.1kgs
Spacing between bars=250mm
=17.78/.250
=71 bar
So the 71 bars are used in the bottom of the cutting
edge.
Weight of the bars=.5x.130x.130x.010x71x7850
=47.750kgs
Total weight of the bars=(353.0459+47.750+518.1)
=918.90kgs
Rate of one metric ton=80000
=[.750X8+.750X2.9+2.2X.750]X2.8
=27.51M3
6 nos. of braket in a single peir
Volume of
brakets=6x.750x.750x.350=1.1025m3
Total volume of peir+ foundation+ peir cap+
cutting edge=335.04m3
Weight=335.04x25
=8376KN/m3
=8376X1000=8376000N
Total weight one peir =853 TON