Professional Documents
Culture Documents
Shaft Collar
Bearing Flat
2-wire motor
shaft coupler
84t gears
2 c-channel 1x2x1x35
4 3 standoff
Vex Cortex
3 wire cable
Steps
1. Screw the 4 3 standoffs at each of the
corner of the 30x15 baseplate using 4
1x2x1x35.
7.slide a shaft collar down the shaft until it is
all the way down, and tighten with allen
wrench.
8.put 84t gears and c-channels 1x2x1x35
onto the shaft, and screw the metal stick to the
gear in the middle of it.
from falling.
12. place Earth onto the shaft that is
connected to motor, and moon to other shaft.
13. put battery any other corner away from
the motor side.
14. plug battery into hole on Vex Cortex.
15. Flip on the switch, and have Fun!