Professional Documents
Culture Documents
1. These indicators represent active or problem exists in the system. With this indication make
operator alert with engine condition and also easy for ET/MT to move next step to solve the
problem if any.
2. When ECU power up the diagnostic lamp will illuminate (blinking) for 5 second ,this to indicate
the lamp circuit is functional
3. The way to diagnose this flash code:
For example flash code 46(see table below) the diagnostic lamp will flash 4 time per second and
stop blinking (pause)and continue blinking 2 time per second. According to table below 46 is
indicate LOW OIL PRESSURE .
4. Take note that the flash code can illuminate for more than one problem exits so operator,ET/MT
have to alert with the flashing pattern.